NFS volume failed to mount

[abos_systemax]

@Quazz

root@NLBDGASS-X03:/# ls -lah /images
total 56K
drwxr-xr-x 11 fog  root 4.0K Jan  9 13:40 .
drwxr-xr-x 25 root root 4.0K Jan  8 17:03 ..
drwxr-xr-x  2 fog  root 4.0K Dec 23 14:08 M900_v1
drwxrwxrwx  2 fog  root 4.0K Jan  8 16:15 dev
drwxr-xr-x  2 fog  root  16K Jan  8 15:44 lost+found
-rwxrwxrwx  1 fog  root    0 Jan  9 09:36 .mntcheck
drwxr-xr-x  2 fog  root 4.0K Jan  8 16:15 postdownloadscripts

root@NLBDGASS-X03:/# ls -lah /images/dev
total 8.0K
drwxrwxrwx  2 fog root 4.0K Jan  8 16:15 .
drwxr-xr-x 11 fog root 4.0K Jan  9 13:40 ..
-rwxrwxrwx  1 fog root    0 Jan  9 09:37 .mntcheck

IPTables has been removed (apt-get remove --purge iptables) and the server has been rebooted, but no change

[Wayne Workman]

@abos_systemax What’s the name of the image you’re trying to deploy? Also, permissions on /images should be 777 recursive for troubleshooting purposes. We first want it working, you can change whatever you want after it’s working.

You might also try to mount the NFS share manually using debug mode to see what sort of error you get. Instructions on that (and other stuff) are here:
https://wiki.fogproject.org/wiki/index.php?title=Troubleshoot_NFS

[Tom Elliott]

What’s the status of: sudo ufw status

[Wayne Workman]

Also - you’re adding another drive to the system. Why? Is SDA full? If so, this would cause some pretty major weirdness. Check with this command: df -h and look for mount points with 99% or 100% usage.

[abos_systemax]

@Wayne-Workman
The reason why I am using another disk is because we want the images and the server to be separated for replication/backup/restore possibilities.
That is why SDA is only 30GB, and the SDB is 1.2TB

Right now I am reïnstalling the server to see why my FOG install seems to be weird; the password etc don’t match, and the FOG client appears to be 1.2.0 instead of 1.3.0 (dunno if that is what it should be). Upgrading the Kernel doesn’t work.

I did first install FOG 1.2.0 by accident; after which I upgraded to 1.3.1, but there might be some configuration issues?

Will post results asap

[Tom Elliott]

@abos_systemax You might need to check the /var/www/fog folder and the /var/www/html/fog folders.

If my guesses are right, right now they’re both individual folders. This would seem to be the cause of the “I installed 1.3.0 but it still looks like 1.2.0”.

[abos_systemax]

@Tom-Elliott
they were indeed! I was wondering where that issue arose from

[Tom Elliott]

@abos_systemax To fix, typically I will find out which holds the current (most likely /var/www/html/fog).

Then I will do:

sudo rm -rf /var/www/fog
sudo ln -s /var/www/html/fog /var/www/

[Tom Elliott]

Trying to hit you on chat with more ideas.

[abos_systemax]

@Tom-Elliott Thanks Tom for the quick help;
For the others in this topic: Thanks as well,
The issue has been resolved. Apparently there was a misconfiguration ‘somewhere’ in the server setup.
I installed FOG 1.2.0 and immediately upgraded to 1.3.1, then configured the SDB harddisk and the images (which were copied from another server), chown-ed and grpch-ed the folders, reconfigured the node and MySQL …

somewhere some setting went wrong;

I’ve reinstalled the server and started from scratch with Fog 1.3.1, now everything works as intended.

[Wayne Workman]

@abos_systemax next time please include the bigger story. In this situation, telling us that this was a migration would have caused us to ask different questions.

[abos_systemax]

@Wayne-Workman I will. I did not pay much attention to it because I assumed that I installed 1.3… but during our Q&A, i slowly realized that there might be an issue with my initial install, especially when I noticed that the FOG client that loaded was 1.2, not 1.3 (but that skips so darn fast that I noticed only after 3 reboots…)