• Recent
    • Unsolved
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login

    i219LM NIC, ASUS Q170M-C Motherboard

    Scheduled Pinned Locked Moved
    Hardware Compatibility
    4
    56
    22.9k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • S
      Sebastian Roth Moderator
      last edited by

      @Tom-Elliott This definitely looks like a timing issue to me. As he said th last picture is from starting the original init.xz in debug and then running ip command without any other actions I suppose. As we see in the picture the interface eth0 is shown properly. So I am pretty sure that it is timing. The interface is not “available” on kernel driver load time straight away but somehow delayed…

      @dustindizzle11 Thanks again! Can you please try the following stuff: Use the original init.xz and add has_usb_nic=1 to the kernel parameters in the host configuration for one of your test clients having this issue. Then when you boot up the client it asks you to replug the (USB-)NIC. Just ignore the message, wait for 10 seconds and hit ENTER to proceed. Does it solve the issue?!

      Web GUI issue? Please check apache error (debian/ubuntu: /var/log/apache2/error.log, centos/fedora/rhel: /var/log/httpd/error_log) and php-fpm log (/var/log/php*-fpm.log)

      Please support FOG if you like it: https://wiki.fogproject.org/wiki/index.php/Support_FOG

      Tom ElliottT D 2 Replies Last reply Reply Quote 1
      • Tom ElliottT
        Tom Elliott @Sebastian Roth
        last edited by

        @Sebastian-Roth I say it isn’t timing not because it couldn’t be, but rather I think the device is there but for whatever reason the carrier link is unrecognized. So I think to further test this theory we would need to see the carrier state not the simple ip command. If it is timing that’s alright as we just increase wait time and all should work fine. If it’s not then I think we need to figure out why the carrier link is unseen.

        Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG! Get in contact with me (chat bubble in the top right corner) if you want to join in.

        Web GUI issue? Please check apache error (debian/ubuntu: /var/log/apache2/error.log, centos/fedora/rhel: /var/log/httpd/error_log) and php-fpm log (/var/log/php*-fpm.log)

        Please support FOG if you like it: https://wiki.fogproject.org/wiki/index.php/Support_FOG

        1 Reply Last reply Reply Quote 0
        • D
          dustindizzle11 @Sebastian Roth
          last edited by

          @Sebastian-Roth I added “has_usb_nic=1” to the Host Kernel Arguments section and it did the same thing it would do before, which is just zip to a black screen. This is the behavior I get when I don’t get an address. I am using the 4.6.2 Kernel. I didn’t get any messages about re-plugging the USB NIC in though. Let me know if you need to me try anything else.

          1 Reply Last reply Reply Quote 0
          • S
            Sebastian Roth Moderator
            last edited by

            @dustindizzle11 said:

            I didn’t get any messages about re-plugging the USB NIC in though. Let me know if you need to me try anything else.

            Well then there is no delay and you will run into the same issue again and again I am sure. Can you please post a screenshot of the host kernel setting in the web GUI…

            Web GUI issue? Please check apache error (debian/ubuntu: /var/log/apache2/error.log, centos/fedora/rhel: /var/log/httpd/error_log) and php-fpm log (/var/log/php*-fpm.log)

            Please support FOG if you like it: https://wiki.fogproject.org/wiki/index.php/Support_FOG

            D 1 Reply Last reply Reply Quote 0
            • D
              dustindizzle11 @Sebastian Roth
              last edited by

              @Sebastian-Roth 0_1476200342678_setting_FOG.JPG

              1 Reply Last reply Reply Quote 0
              • S
                Sebastian Roth Moderator
                last edited by

                @dustindizzle11 Is your kernel file actually named 4.6.2? What do you see when running ls -al /var/www/{,html}/fog/service/ipxe/?

                As well would you mind posting a sceenshot of the host settings where we see the MAC address as well. I just want to make sure that we are not running in circles not seeing the obvious reason…

                Web GUI issue? Please check apache error (debian/ubuntu: /var/log/apache2/error.log, centos/fedora/rhel: /var/log/httpd/error_log) and php-fpm log (/var/log/php*-fpm.log)

                Please support FOG if you like it: https://wiki.fogproject.org/wiki/index.php/Support_FOG

                D 1 Reply Last reply Reply Quote 0
                • D
                  dustindizzle11 @Sebastian Roth
                  last edited by

                  @Sebastian-Roth Yes, I named it “4.6.2” in “/var/www/{,html}/fog/service/ipxe/”. I am positive the kernel file is named correctly and that it loads when PXE booting. Below are the screenshots you requested.

                  1_1476285820772_fog2.JPG 0_1476285820771_fog1.JPG

                  1 Reply Last reply Reply Quote 0
                  • S
                    Sebastian Roth Moderator
                    last edited by

                    @dustindizzle11 Looks all good to me too. So even more I am wondering why you don’t see the waiting time when setting the has_usb_nic parameter… Possibly this is an older version of the init.xz file (maybe from FOG 1.2.0 when I look at the size of just about 10 MB??). The most current one is around 17 MB (more drivers). So I am pretty sure this is what’s going on.

                    As you already know how to modify the init.xz file please do so and copy & paste the full content of the file etc/init.d/S40network extracted from the init.xz file you have.

                    Web GUI issue? Please check apache error (debian/ubuntu: /var/log/apache2/error.log, centos/fedora/rhel: /var/log/httpd/error_log) and php-fpm log (/var/log/php*-fpm.log)

                    Please support FOG if you like it: https://wiki.fogproject.org/wiki/index.php/Support_FOG

                    1 Reply Last reply Reply Quote 0
                    • Tom ElliottT
                      Tom Elliott
                      last edited by

                      I’ve updated the S40network script to use a case insensitive approach.

                      The beauty is all you need to do to test it is rerun the installer and you will have the latest init.

                      Please update if you can and let us know if it’s working any better.

                      Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG! Get in contact with me (chat bubble in the top right corner) if you want to join in.

                      Web GUI issue? Please check apache error (debian/ubuntu: /var/log/apache2/error.log, centos/fedora/rhel: /var/log/httpd/error_log) and php-fpm log (/var/log/php*-fpm.log)

                      Please support FOG if you like it: https://wiki.fogproject.org/wiki/index.php/Support_FOG

                      D 1 Reply Last reply Reply Quote 1
                      • D
                        dustindizzle11 @Tom Elliott
                        last edited by

                        @Tom-Elliott I installed Fog1.2 on another system and copied over the init.xz to my current fog setup. After sending the image, it just zipped through to a black screen again 😞 . So it did the same thing that it did before. shoot…

                        @Sebastian-Roth Below is the S40network contents from my original init.xz…

                        #!/bin/sh

                        Start the network…

                        case “$1” in
                        start)
                        echo “Starting network…”
                        /sbin/ifup -a
                        ;;
                        stop)
                        echo -n “Stopping network…”
                        /sbin/ifdown -a
                        ;;
                        restart|reload)
                        “$0” stop
                        “$0” start
                        ;;
                        *)
                        echo “Usage: $0 {start|stop|restart}”
                        exit 1
                        esac

                        exit $?

                        1 Reply Last reply Reply Quote 0
                        • Tom ElliottT
                          Tom Elliott
                          last edited by

                          I made this change for the RC’s. Unfortunately the installer for the FOG 1.2 did not have this possibility. I was under the impression you were running on the RC versions.

                          Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG! Get in contact with me (chat bubble in the top right corner) if you want to join in.

                          Web GUI issue? Please check apache error (debian/ubuntu: /var/log/apache2/error.log, centos/fedora/rhel: /var/log/httpd/error_log) and php-fpm log (/var/log/php*-fpm.log)

                          Please support FOG if you like it: https://wiki.fogproject.org/wiki/index.php/Support_FOG

                          D 1 Reply Last reply Reply Quote 0
                          • D
                            dustindizzle11 @Tom Elliott
                            last edited by

                            @Tom-Elliott No, not on my live fog system. This has fog 1.2. Is the RC S40 script still applicable if I am able to get it?

                            Tom ElliottT 1 Reply Last reply Reply Quote 0
                            • Tom ElliottT
                              Tom Elliott @dustindizzle11
                              last edited by

                              @dustindizzle11 No. 1.2.0 didn’t even use detection of interfaces to get IP information. This is likely why you’re not seeing it as a “success” in the compatibility either.

                              Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG! Get in contact with me (chat bubble in the top right corner) if you want to join in.

                              Web GUI issue? Please check apache error (debian/ubuntu: /var/log/apache2/error.log, centos/fedora/rhel: /var/log/httpd/error_log) and php-fpm log (/var/log/php*-fpm.log)

                              Please support FOG if you like it: https://wiki.fogproject.org/wiki/index.php/Support_FOG

                              D 1 Reply Last reply Reply Quote 0
                              • D
                                dustindizzle11 @Tom Elliott
                                last edited by

                                @Tom-Elliott Ok. I will just leave this as is then unless there is something you guys want me to do. Thanks for all

                                Tom ElliottT 1 Reply Last reply Reply Quote 0
                                • Tom ElliottT
                                  Tom Elliott @dustindizzle11
                                  last edited by

                                  @dustindizzle11 I would highly recommend updating to RC-14, unless there’s a particular reason for the reservations?

                                  Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG! Get in contact with me (chat bubble in the top right corner) if you want to join in.

                                  Web GUI issue? Please check apache error (debian/ubuntu: /var/log/apache2/error.log, centos/fedora/rhel: /var/log/httpd/error_log) and php-fpm log (/var/log/php*-fpm.log)

                                  Please support FOG if you like it: https://wiki.fogproject.org/wiki/index.php/Support_FOG

                                  D 1 Reply Last reply Reply Quote 1
                                  • D
                                    dustindizzle11 @Tom Elliott
                                    last edited by

                                    @Tom-Elliott I will eventually (and want to). The reason for reservations on upgrading Fog right now is because I am not wanting to fight through all the things that can break when upgrading my live system (not saying it would, just there’s a chance). I work for a school district so I would rather test things before-hand to ensure the system is still functional if it is needed.

                                    Tom ElliottT 1 Reply Last reply Reply Quote 0
                                    • Tom ElliottT
                                      Tom Elliott @dustindizzle11
                                      last edited by

                                      @dustindizzle11 I totally understand.

                                      Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG! Get in contact with me (chat bubble in the top right corner) if you want to join in.

                                      Web GUI issue? Please check apache error (debian/ubuntu: /var/log/apache2/error.log, centos/fedora/rhel: /var/log/httpd/error_log) and php-fpm log (/var/log/php*-fpm.log)

                                      Please support FOG if you like it: https://wiki.fogproject.org/wiki/index.php/Support_FOG

                                      1 Reply Last reply Reply Quote 0
                                      • S
                                        Sebastian Roth Moderator
                                        last edited by

                                        @dustindizzle11 Sorry for my late reply. There is a side way you could go with this now that you know how to modify the init.xz image. Grep yourself a copy of the current script and exchange the one you posted with this new one. See if you can make it work with this. Just an idea for a quick dirty fix.

                                        Web GUI issue? Please check apache error (debian/ubuntu: /var/log/apache2/error.log, centos/fedora/rhel: /var/log/httpd/error_log) and php-fpm log (/var/log/php*-fpm.log)

                                        Please support FOG if you like it: https://wiki.fogproject.org/wiki/index.php/Support_FOG

                                        1 Reply Last reply Reply Quote 0
                                        • 1
                                        • 2
                                        • 3
                                        • 3 / 3
                                        • First post
                                          Last post

                                        200

                                        Online

                                        12.0k

                                        Users

                                        17.3k

                                        Topics

                                        155.2k

                                        Posts
                                        Copyright © 2012-2024 FOG Project