CentOS 6 GUI login loop.

[Wayne Workman]

@ManofValor Your root partition is 100% full. That’s the problem.

[ManofValor]

@Wayne-Workman
So I can’t login cause it’s full?

[ManofValor]

@Wayne-Workman
I don’t understand, I haven’t put anything on there to fill it up?

[Thiago]

@ManofValor because your /home is at the same place at your / and when you try to login, some files maybe touched and this prevent you to enter.

[ManofValor]

I ran this:

[root@localhost Downloads]# df  -ah --o
Filesystem                     Type            Inodes IUsed IFree IUse%  Size  Used Avail Use% File Mounted on
rootfs                         -                    -     -     -     -     -     -     -    - -    /
sysfs                          sysfs                0     0     0     -     0     0     0    - -    /sys
proc                           proc                 0     0     0     -     0     0     0    - -    /proc
devtmpfs                       devtmpfs          470K   494  469K    1%  1.9G     0  1.9G   0% -    /dev
securityfs                     securityfs           0     0     0     -     0     0     0    - -    /sys/kernel/security
tmpfs                          tmpfs             473K     6  473K    1%  1.9G  2.8M  1.9G   1% -    /dev/shm
devpts                         devpts               0     0     0     -     0     0     0    - -    /dev/pts
tmpfs                          tmpfs             473K   658  473K    1%  1.9G  8.9M  1.9G   1% -    /run
tmpfs                          tmpfs             473K    13  473K    1%  1.9G     0  1.9G   0% -    /sys/fs/cgroup
cgroup                         cgroup               0     0     0     -     0     0     0    - -    /sys/fs/cgroup/systemd
pstore                         pstore               0     0     0     -     0     0     0    - -    /sys/fs/pstore
cgroup                         cgroup               0     0     0     -     0     0     0    - -    /sys/fs/cgroup/cpu,cpuacct
cgroup                         cgroup               0     0     0     -     0     0     0    - -    /sys/fs/cgroup/net_cls
cgroup                         cgroup               0     0     0     -     0     0     0    - -    /sys/fs/cgroup/blkio
cgroup                         cgroup               0     0     0     -     0     0     0    - -    /sys/fs/cgroup/hugetlb
cgroup                         cgroup               0     0     0     -     0     0     0    - -    /sys/fs/cgroup/perf_event
cgroup                         cgroup               0     0     0     -     0     0     0    - -    /sys/fs/cgroup/devices
cgroup                         cgroup               0     0     0     -     0     0     0    - -    /sys/fs/cgroup/memory
cgroup                         cgroup               0     0     0     -     0     0     0    - -    /sys/fs/cgroup/cpuset
cgroup                         cgroup               0     0     0     -     0     0     0    - -    /sys/fs/cgroup/freezer
configfs                       configfs             0     0     0     -     0     0     0    - -    /sys/kernel/config
/dev/mapper/centos00-root00    ext4              1.3M  155K  1.2M   13%   20G   20G     0 100% -    /
systemd-1                      -                    -     -     -     -     -     -     -    - -    /proc/sys/fs/binfmt_misc
mqueue                         mqueue               0     0     0     -     0     0     0    - -    /dev/mqueue
debugfs                        debugfs              0     0     0     -     0     0     0    - -    /sys/kernel/debug
hugetlbfs                      hugetlbfs            0     0     0     -     0     0     0    - -    /dev/hugepages
sunrpc                         rpc_pipefs           0     0     0     -     0     0     0    - -    /var/lib/nfs/rpc_pipefs
nfsd                           nfsd                 0     0     0     -     0     0     0    - -    /proc/fs/nfsd
/dev/sda5                      ext4               63K   365   63K    1%  969M  329M  574M  37% -    /boot
/dev/mapper/fog-opt_fog_images ext4               26M  9.7K   26M    1%  395G  223G  152G  60% -    /opt
/dev/sdb1                      ext4              261M    29  261M    1%  8.1T   52G  7.7T   1% -    /opt/fog/images
/dev/sdb1                      ext4              261M    29  261M    1%  8.1T   52G  7.7T   1% -    /images
tmpfs                          tmpfs             473K    14  473K    1%  379M   12K  379M   1% -    /run/user/42
gvfsd-fuse                     fuse.gvfsd-fuse      0     0     0     -  0.0K  0.0K  0.0K    - -    /run/user/42/gvfs
fusectl                        fusectl              0     0     0     -     0     0     0    - -    /sys/fs/fuse/connections
tmpfs                          tmpfs             473K     1  473K    1%  379M     0  379M   0% -    /run/user/1000
binfmt_misc                    binfmt_misc          0     0     0     -     0     0     0    - -    /proc/sys/fs/binfmt_misc

What does it all mean and how do I know what to delete or rearrange?
How did it fill up when I didn’t do anything?

[Tom Elliott]

@ManofValor Seeing as /images (or whatever your relevant storage point is) is expected to be on the NAS, I’d recommend cleaning out the current storage location as it’s located on your main disk. You could just do something like:

Unmount the current NAS if it is already mounted with:

umount /images

Then check the /images directory and remove any files in there. This is entirely up to you at this point, I’m giving you how to fix, make sure you don’t delete all your current NAS images.

rm -rf /images/*

Then try to mount the nas.

[Wayne Workman]

@Tom-Elliott Very good thinking, Tom. If the NAS was off, mounting failed, and any images you captured would have gone straight onto the root partition. ESPECIALLY since I remember ManOfValor running the installer so many times before having the NAS correctly configured, the needed .mntcheck files and dev folder would absolutely be present, so any upload would go until space ran out.

@ManofValor Try Tom’s advice - but you must be careful, you MUST successfully unmount the /images directory for the NAS, and you SHOULD confirm and reconfirm that it unmounted correctly. Being new to linux, after this command I’d even suggest you turn the NAS off after unmounting. Then run the delete commands that Tom posted. Then run df -h to check free space. If the root partition is substantially free’d up, then hook everything back up, turn it on, give the server a reboot, and see if things work.

Tom’s commands would also ensure that uploading will never work without the NAS being properly mounted - unless of course you run the installer without the NAS being mounted, as the installer would re-create those needed files/folders for image capture on the root partition.

Let us know how it goes.

[Wayne Workman]

Also, the problem was found, but it’s not solved yet, so I marked the thread unsolved. I don’t want others to not bother reading & helping because they think it’s solved.

[ManofValor]

@Wayne-Workman
Good morning,
Everything on the NAS is just tests, so if I don’t care what’s deleted then I don’t need to unmount, right?

[Tom Elliott]

@ManofValor You would still need to unmount, because the space is used by your main system. Simply removing all the data in the mounted partition will only free up space on the mount point.

[Wayne Workman]

@ManofValor http://www.tldp.org/LDP/intro-linux/html/sect_03_01.html

[ManofValor]

@Tom-Elliott
Ok, this thread is solved. After I deleted everything I was able to login. Thanks again guys.