Can't register Optiplex 5040- tsc: Fast TSC calibration failed
-
@Aaron-Flora https://fogproject.org/kernels/
This is a list of all the kernels we currently have. I know it doesn’t show up as nicely as the kernel update feature does, but it does work the same.
The bzImage bzImage32 files are the current (4.5.1 at this time) kernel’s on the server. Try updating and it should help, I hope.
-
@Aaron-Flora said in Can't register Optiplex 5040- tsc: Fast TSC calibration failed:
The 3040 also has the “Fast TSC calibration failed error” but still registers with FOG.
I am having the same trouble with 5040 OptiPlex, I can confirm that it is the model (Have 43 of them here and I tested 5 random) and most likely the NIC driver is not included in the FOG Kernel.
So we’ll need the kernel updated in order to add the 5040 to the compatibility list. I’ve never done this but am willing to try. The only instructions I have found are for using Fedora to do this.
https://wiki.fogproject.org/wiki/?title=Building_a_Custom_Kernel
Anyone doing this, already done, know a workaround?
Ahshan
less than a minute ago
Re: Can’t register Optiplex 5040- tsc: Fast TSC calibration failed
I was wondering if this happen to rectify the error as I have applied the kernel and bzimage to Fog 0.32 but fog is still not recognising the host as it comes with the error
Hdparm: ioctl 0x384 failed: inappropriate ioctl for device
-
@Ahshan Please start your own thread since your situation is different than the OP of this thread.
When you start your own thread please post the kernel versions you are using. I know you stated that you are running fog 0.30 (which is really old) but we need to know the version of bzImage you are using.
