Egress / transmit bandwidth not showing up

[moses]

I’m not sure if this is the relevant place, but the /fog/status/bandwidth.php page for my master shows:

{"dev":"unknown","rx":0,"tx":0}

[Tom Elliott]

On this, look on your storage nodes. Ensure the interface defined on the GUI matches what’s output for the interface on the server/node with ifconfig -a.

[moses]

@Tom-Elliott Where is the interface define in the GUI? Can’t seem to find that setting.

[Tom Elliott]

@moses Storage Management Page->All Storage Nodes->[Choose any/all node(s) you need to edit]->interface

[moses]

@Tom-Elliott And that interface field should be set to the master’s interface? Not the nodes’?

[Tom Elliott]

@moses It should be set to whatever the node’s interface is.

MasterNode Real interface name is: eno12222222222 Make MasterNode’s interface on gui equal to eno12222222222.

StorageNode Real interface name is: em1 Make StorageNode’s interface on GUI equal to em1

[moses]

@Tom-Elliott Ah. Yes. Forgot that the master is listed in storage nodes. After that’s changed, are there any services that need to be restarted?

[Tom Elliott]

@moses Potentially.

I’d recommend just reupdate/rerun the installer just to be certain.

[moses]

@Tom-Elliott That did the trick!

That is, after I mistook the interface name “eno1” for “en01”. I should really go to bed.

[Sebastian Roth]

@Tom-Elliott So it seams like the new bandwidth.php is working as well?!