There is no pxelinux.cfg or fog dir in tftpboot (fog 1.2.0)

[alireza]

Hi
I’m new in fog and pxe,
After installation of fog1.2.0 on my debian testing i want to add cusome iso to fog menu following tourials, but there is no pxelinux.cfg or fog dir in tftpboot directory and when i created them it’s not detected at all.
This is tftpboot dir ls :

root@alilap:/tftpboot# ls -lpa
total 2572
drwxr-xr-x  2 fog  root   4096 Oct 23 23:09 ./
drwxr-xr-x 24 root root   4096 Oct 23 22:30 ../
-rw-r--r--  1 fog  root    840 Oct 23 22:30 boot.txt
-rw-r--r--  1 root root    295 Oct 23 22:30 default.ipxe
-rw-r--r--  1 fog  root 389009 Oct 23 22:30 ipxe.kkpxe
-rw-r--r--  1 fog  root 389057 Oct 23 22:30 ipxe.kpxe
-rw-r--r--  1 fog  root 388044 Oct 23 22:30 ipxe.krn
-rw-r--r--  1 fog  root 389073 Oct 23 22:30 ipxe.pxe
-rw-r--r--  1 fog  root  25340 Oct 23 22:30 memdisk
-rw-r--r--  1 fog  root  16794 Oct 23 22:30 pxelinux.0.old
-rw-r--r--  1 fog  root 165088 Oct 23 22:30 snponly.efi
-rw-r--r--  1 fog  root 101989 Oct 23 22:30 undionly.kkpxe
-rw-r--r--  1 fog  root 102037 Oct 23 22:30 undionly.kpxe
-rw-r--r--  1 fog  root 382650 Oct 23 22:30 undionly.kpxe.INTEL
-rw-r--r--  1 fog  root 102053 Oct 23 22:30 undionly.pxe
-rw-r--r--  1 fog  root 147728 Oct 23 22:30 vesamenu.c32

How can edit menu and add new iso to boot menu ?
Is other way to config fog ?
I read these toturials :
http://www.howtogeek.com/57601/what-is-network-booting-pxe-and-how-can-you-use-it/
http://www.howtogeek.com/61263/how-to-network-boot-pxe-the-ubuntu-livecd/
https://wiki.fogproject.org/wiki/index.php/Include_Parted_Magic
https://wiki.fogproject.org/wiki/index.php/Include_any_ISO_in_the_FOG_Bootmenu
Thanks

[Wayne Workman]

Here’s an example that uses FOG Trunk (1.3.0): https://wiki.fogproject.org/wiki/index.php/DBAN_(Darik’s_Boot_and_Nuke)

There is no one way to add an ISO, it just depends on what it is… and in some cases there are much more superior options than trying to use FOG to deliver an ISO… for instance, a Windows ISO is a bad idea when you can use WinPE to initiate a Windows installation.

Here’s instructions on upgrading to trunk: https://wiki.fogproject.org/wiki/index.php/Upgrade_to_trunk

[ivan68]

Hi
I have the same problem (Ubuntu 14.04 64 bit with Fog 1.2), missing configuration file…

I have also another problema with dnsmasq (I can not change my DHCP setting…) than I use how in this tutorial:
https://wiki.fogproject.org/wiki/index.php/Using_FOG_with_an_unmodifiable_DHCP_server/_Using_FOG_with_no_DHCP_server

I setting “port=0” in dnsmasq configuration file, but when dnsmasq service start I can not use my corporate DNS… (I can not resolve hostname…)

But my primary problem is missign configuration file…

[Tom Elliott]

@ivan68 the reason you guys are seeming that default/pxelinux folders missing is because they are. The do not exist between 1.0.0 and 1.2.0.