Boot Problem with restoring image to HP Z Series (Z230) & Clonezillia IPXE Boot
-
Array name is volume1, I created the array before starting the debug task
This is what i see after running fdisk -l
-
-
If this is a basic RAID 1 configuration,
Why not just disable it temporarily, and upload your image from a standard disk, then re-enable it and have RAID rebuild the clone?
Then, when you want to image, disable RAID, image, then enable RAID and have it rebuild the clone?
-
When you restore the image the disk become a non member disk… so to rebuild it asks you to select the new disk and this is the one with the image on it… if you proceed you close everything.
If i was to restore to 1 disk (with no raid)… when i create the raid1 it formats them both.
-
Have you tried Clonezilla ?
-
No I haven’t… Is that an addon to fog or does get require another server setup?
-
Clonezilla has no affiliation with FOG, and it does not require a server.
It’s a bootable disk used for imaging. I only suggest this because, hey, if it works, that’s great. You have 75 computers to image, right?
-
will give this a shot… would be good to have a backup if it works on software Raid.
trying to add it to the ipxe boot menu, have this but wont boot… Any idea on how to live boot it?
:clonezilla-live-2.3.2-22-amd64
kernel http://${fog-ip}/${fog-webroot}/iso/clonezilla/vmlinuz
initrd http://${fog-ip}/${fog-webroot}/iso/clonezilla/initrd.lz
imgargs vmlinuz root=/dev/nfs boot=clonezilla netboot=nfs nfsroot=${fog-ip}:/var/www/fog/service/ipxe/clonezilla/ locale=en_US.UTF-8 keyboard-configuration/layoutcode=la mirror/country=US
boot || goto failed
goto start -
Check this post out: https://forums.fogproject.org/topic/4790/how-to-add-live-cd-iso-to-fog-1-2-on-ubuntu-12-04
I’m going to be following this also, tonight.
This ISO network booting question comes up over and over and over and over and over. It’s a never-ending question lol.
If I can get it working, I’m going to make a very nice WiKi article on it.
-
@Wayne-Workman
came across this https://gist.github.com/robinsmidsrod/dc0dc70adba8dcd79cdfnot sure if this would help? tried adding the forth line with no luck
#!ipxe
kernel /live/vmlinuz
initrd /live/initrd.img
imgargs vmlinuz boot=live username=user hostname=trusty config quiet union=overlayfs noswap edd=on nomodeset noeject locales= keyboard-layouts= ocs_live_run=“ocs-live-general” ocs_live_extra_param=“” ocs_live_batch=no ip= nomodeset vga=normal nosplash
boot -
It’s probably a step in the right direction.
Keep searching though, but you’d probably have the best luck searching in the forums here for ISO tons of people have got it going on various versions of FOG.
I’ll only be addressing the next release (the one you’re using), FOG 1.3.0
-
@Wayne-Workman @Developers @Tom-Elliot
Currently this is the closest to booting i have… error message below
:clonezilla-live-2.3.2-22-amd64
kernel http://${fog-ip}/${fog-webroot}/iso/clonezilla/vmlinuz
initrd http://${fog-ip}/${fog-webroot}/iso/clonezilla/initrd.img
imgargs vmlinuz root=/dev/nfs boot=clonezilla netboot=nfs nfsroot=${fog-ip}:/var/www/fog/service/ipxe/clonezilla/ locale=en_US.UTF-8 keyboard-configuration/layoutcode=us mirror/country=US
boot || goto failed
-
You work fast…
I rebuilt all my servers this weekend… I’m still running updates lol.
-
I have also found this, bot have no idea on how to get this to boot from fog ipxe… Hopefully someone might have an idea of the config.
https://gist.github.com/devicenull/3896763
:imaging
set image_name your-image-namekernel http://${next-server}/tools/clonezilla-live/vmlinuz initrd=tools/clonezilla-live/initrd.img boot=live live-config noswap nolocales edd=on nomodeset ocs_daemonon=“ssh” ocs_live_run=“ocs-live-restore” ocs_live_extra_param=“–batch -g auto -e1 auto -e2 -r -j2 -p reboot restoredisk ${image_name} sda” ocs_live_keymap=“/usr/share/keymaps/i386/qwerty/us.kmap.gz” ocs_live_batch=“yes” ocs_lang=“en_US.UTF-8” vga=788 nosplash fetch=http://${next-server}/tools/clonezilla-live/filesystem.squashfs ip=eth0:${netX/ip}:${netX/netmask}:${netX/gateway}:8.8.8.8 ocs_prerun=“mount -t nfs ${next-server}:/home/partimag /home/partimag”
initrd http://${next-server}/tools/clonezilla-live/initrd.img
boot -
I’m still working on this at the house, making good progress though… but disaster struck last night and the AC adapter for my small business router died…
-
Ok Great…
Just tried this with no luck… didn’t get as far as the the last config.
http://bootallthethings.blogspot.co.nz/2013/01/ipxe-clonezilla.html
kernel http://${fog-ip}/${fog-webroot}/iso/clonezilla/vmlinuz
initrd http://${fog-ip}/${fog-webroot}/iso/clonezilla/initrd.img
imgargs vmlinuz boot=live config noswap nolocales edd=on nomodeset ocs_live_run=“ocs-live-general” ocs_live_extra_param=“” ocs_live_keymap=“” ocs_live_batch=“no” ocs_daemonon=“ssh” usercrypted=Kb/VNchPYhuf6 ocs_lang=“” vga=788 nosplash noprompt
fetch=http://${fog-ip}/${fog-webroot}/iso/clonezilla/filesystem.squashfs
boot || goto failed
goto start -
Last night before everything went wrong, I noticed the init and kernel are in a folder on the Clonezilla iso called “boot”…
Have you tried leaving those files where they are? and do you have the iso Mounted to the directory that is specified in that path below?
-
-
Ok… If you get it working, let us know.
I’ll be working on it too.
-
Not sure if this has been resolved or not, but this site was a great help to me in setting up my Clonezilla PXE boot; http://clonezilla.org/livepxe.php .
you’ll need initrd.img, vmlinuz, and filesystem.squashfs from the .iso or .zip of clonezilla.
Here’s what I ended up with…
:Clonezilla initrd http://<fogIP>/fog/clonezilla/initrd.img chain http://<fogIP>/fog/clonezilla/vmlinuz boot=live config noswap nolocales edd=on nomodeset ocs_live_run="ocs-live-general" ocs_live_extra_param="" keyboard-layouts="" ocs_live_batch="no" locales="" vga=788 nosplash noprompt fetch=http://<fogIP>/fog/clonezilla/filesystem.squashfs || goto MENUand that has me booting to Clonezilla just as if I picked the default menu booting from usb.
