PXE Menu Problem - timeout and boot from HDD (menu option 1) -- doesn't happen
-
Something else must have been done…
It doesn’t just break. If you set everything back the way it was, it should work as it did before.
Did it work with undionly.kkpxe ?
Remember this post ??
Fog PXE Boot Menu Configuration.No-Menu=**checked
Fog PXE Boot Menu Configuration.Exit-to-hard-drive-type=(any value)
Result: after PXE menu, Windows boots and it’s happy -
If it is prioritizing the mode as uefi then legacy but booting to legacy first, change the mode back to legacy. Sure you lose the priority because you’ve implicitly set it so there is no priority to use. I don’t know if it will make the system work but this, for now, seems the best starting point.
-
Honestly, I took a siesta for about 2 hours. Then went into Fog to the IPXE Boot Menu config and just did an update without changing any values (i.e. still said NO MENU). Went to the Com Lab and it worked just like it did before. I think I will be happy with NO MENU and not try to improve on this.
-
Isn’t the menu required to register at the host? Or did you change it to do quick-register for anything that isn’t registered?
-
I’ve left the PXE menu activated to register everything to begin with during my deploy period.
But for my use/production period, I will have it as NO MENU.
