PXE boot to FOG 1.2.0 from FOG 0.32 menu

[eric0626]

[quote=“Jaymes Driver, post: 42003, member: 3582”]try [code]sudo chmod -R 0777 /var/www/fog/service[/code]
this will give global read/write permissions just to verify we can get the page to display, we can adjust settings later for 755 or 644.[/quote]

Hi Jaymes, it seems like it’s still the same. It still displays a blank page.

[url=“/_imported_xf_attachments/1/1672_777 ipxe folder permission.JPG?:”]777 ipxe folder permission.JPG[/url][url=“/_imported_xf_attachments/1/1673_777 service folder permission.JPG?:”]777 service folder permission.JPG[/url]

[Jaymes Driver]

At least now we know it isn’t a permission issue

I will see if I can get some time to set up a test server and work on this for you. I used chain loading back when 0.33b was in the works, and it worked well then, We should be able to get it going again.

[eric0626]

[quote=“Jaymes Driver, post: 42013, member: 3582”]At least now we know it isn’t a permission issue :D[/quote]

LOL!! I’m so tempting to re-install the whole thing because I recall it happens after I updated to a newer svn version.

[Jaymes Driver]

This post is deleted!

[Jaymes Driver]

[quote=“eric0626, post: 42028, member: 357”]LOL!! I’m so tempting to re-install the whole thing because I recall it happens after I updated to a newer svn version.[/quote]

That of course, is always an option, but I should be able to set up a test server tomorrow to assist you further.

[eric0626]

[quote=“Jaymes Driver, post: 42030, member: 3582”]That of course, is always an option, but I should be able to set up a test server tomorrow to assist you further.[/quote]

OK sounds good! I can wait! Thank you so much Jaymes!!

[Jaymes Driver]

First off: I will rewrite all of this in complete steps when we are done, but for now, lets focus on the fragments.

ipxe.krn needs to be in /tftpboot not in /tftpboot/fog/kernel.

I see you already have placed /var/www/fog/service/ipxe, that is good.

Now we need to get the kernel booting.

[jbsclm]

Hi eric0626
When you tried [url]http://10.2.6.40/fog/service/ipxe/boot.php[/url] in your web browser and got a blank page, did you check the apache error log?
I am seeing the same now I’ve upgraded to 3010, I get an error 500 in the error log.

I’m just trying a reinstall on a clean vm.

[jbsclm]

I’ve done a clean install of r3010, and have the same problem.

I’ve got round it by manually adding a host,
[url]http://http://192.168.1.20/fog/service/ipxe/boot.php[/url]
then returns data.
For me it still works even if I delete the host.

For info for Tom, the error was
PHP Fatal error: Call to a member function get() on a non-object in /var/www/fog/lib/fog/BootMenu.class.php on line 143

[jbsclm]

Still problems I am afraid.
If I delete all hosts from the gui, and then quick register one, ( same MAC address as before) I get

Call to undefined method MACAddress::isImageIgnored() in /var/www/fog/lib/fog/BootMenu.class.php on line 761

when going to [url]http://http://192.168.1.20/fog/service/ipxe/boot.php[/url]

I’ll upgrade to 3012 and see how that goes

[jbsclm]

Hi eric0626
I’ve upgraded to r3012, and is working for me now.

[eric0626]

Thanks for the info!! I will give it a try and report back!!

[eric0626]

I did a fresh installation of FOG 1.2.0 (without updating svn) and chainloading pxe is working now.
I think there may be some updates in the svn which stop chainloading pxe. o_O