Unable to Join Domain
-
I uploaded my new image this afternoon. When I deployed it to the test computer, it didnt automatically join the domain.
I reviewed the FOG log and I found the following lines:
FOG:: HostnameChanger Attempting to join domain if not already a member…
FOG:: HostnameChanger Domain Error! (‘Unknown Error’ code: 123) -
I forgot to mention that I copied
C:\Windows\System32\netdom.exe and C:\Windows\System32\en-US\netdom.exe.mui from the domain controller to the workstation I uploaded the image from.
-
Did you checked your AD Settings in the fog config ?
e.g. Username without “AD” if you use Fog > 1.x .
[URL=‘http://abload.de/image.php?img=fog_adnduux.png’][IMG]http://abload.de/thumb/fog_adnduux.png[/IMG][/URL]
-
Hi,
You might want to check my post out here: [url]http://fogproject.org/forum/threads/domain-join-not-working-since-moving-to-v1-2-0-error-87.11642/[/url]
If you change the settings in the configuration area the change does not update in the individual/group hosts so you need to check your settings in the config area match up and then go and replicate your change on either the one host you want to fog… the easier way of doing it is to replicate the configuration change for the groups you have the hosts in, if you’ve grouped them.
Hope this helps you out
-
[quote=“KOA-IT, post: 36528, member: 25995”]Hi,
You might want to check my post out here: [url]http://fogproject.org/forum/threads/domain-join-not-working-since-moving-to-v1-2-0-error-87.11642/[/url]
If you change the settings in the configuration area the change does not update in the individual/group hosts so you need to check your settings in the config area match up and then go and replicate your change on either the one host you want to fog… the easier way of doing it is to replicate the configuration change for the groups you have the hosts in, if you’ve grouped them.
Hope this helps you out :)[/quote]
Hello KOA-IT,
Your post was the answer I was looking for. I was changing the AD Settings in FOG Settings. I didnt realise the changes were not replicating to the hosts/groups. Once I changed it in the groups it all started working.
Thank you very much for your help. Now I can reimage our computer labs.