FOG version 1.2 images will not deploy

[Albatros]

Revision 2119
Ubuntu: 12.04.5 LTS

I can confirm that problem, too.
Uploading a image with 2 partitions to the server works fine, but the folder of the image name, is not created and then the partition files won’t get moved and I don’t see or get any errors.
Creating the folder, moving the files and setting the permissions doesn’t help too. I get this error, If I try to do then an download
[CODE]Download task failed to create for ITFOGWin7 with image test_image
To setup download task, you must first upload an image[/CODE]
Should I upgrade to a newer revision or any other ideas?

[Junkhacker]

you need to check your ftp settings in both the storage management and in fog settings
make sure the settings match what the password is for the linux user “fog” as well.

[Josh Scoville]

I checked my settings: Have the username fog with my password in storage management for the defaultmember management username and password. It is the same in the TFTP settings in FOG settings. I don’t see a setting for FTP, only TFTP server. My username and password are the same in all areas that I know to check.

For me, when I copied the image over manually from /images/dev/macaddress to /images/imagename, it worked for deploying the image, but this should be an automatic process.

We use this server in a production environment almost daily, so this is very important to get fixed. thanks!

[Junkhacker]

have you verified that the username and password can log into the ftp server?

[Josh Scoville]

I just tried going to [url]ftp://10.10.100.218[/url] which is my server’s ip address and get the following error: v500 OOPS: priv_sock_get_int
.

Tried using web browser. Sorry I am not more familiar with the fog server’s ftp setup, but usually this works when logging into an internet ftp site.

[Tom Elliott]

Awesome,

Edit your /etc/vsftpd.conf file and add the parameter:
[code]seccomp_sandbox=NO[/code]

Save and close the file.

Restart ftp services:
[code]sudo service vsftpd restart[/code]

[Josh Scoville]

Ah, OK now I can login to ftp via web and see the directory tree. So should I try uploading a new image and see what happens?

[Junkhacker]

yes

[Josh Scoville]

Let me know if this is an unrelated issue and needs to be on its own thread, but ever since day 1 when we upload an image using the default partclone image, it crawls along at under 500 MB transfer rate on a Gigabit network. When we deploy an older image using partimage, it flys at 2-3 GB transfer rate. Just wondering if this is something that can be adjusted as it now takes forever to upload an image. Deploying the partclone image does seem faster, just the uploads are so slow.

[Junkhacker]

that’s the compression. uploads slow, downloads fast. you can turn it down from the default of 9 in the settings page, i keep mine around 6.

[Josh Scoville]

OK, I must be a complete blind idiot today, because I can’t find that setting anywhere on the FOG settings page. What title should I look for? Thanks a lot!

[Junkhacker]

fog configuration>fog settings>fog boot settings> FOG_PIGZ_COMP

[Josh Scoville]

Thanks! If it was a snake, I’d be less one nose right now!

[neilm]

has this been resolved? i checked all settings and can login to ftp with broswer and filezilla. but images stay in /images/dev until manually moved

[Josh Scoville]

[quote=“neilm, post: 37138, member: 24150”]has this been resolved? i checked all settings and can login to ftp with broswer and filezilla. but images stay in /images/dev until manually moved[/quote]

Tom Elliott’s post above fixed it for me. You have to edit /etc/vsftpd.conf and then restart the ftp services.