Client shows uploading but server says no image
-
If you can change it to bzImage, and see if you get better luck. it sounds to me like it’s loading file names it can’t find, which would explain the error you’re seeing.
-
Location of the filenames to make sure are set properly:
FOG Configuration->FOG Settings->TFTP Server->FOG_TFTP_PXE_KERNEL (this should be bzImage)
FOG Configuration->FOG Settings->TFTP Server->FOG_TFTP_PXE_KERNEL_32 (this should be bzImage32)
FOG Configuration->FOG Settings->TFTP Server->FOG_PXE_BOOT_IMAGE (this should be init.xz)
FOG Configuration->FOG Settings->TFTP Server->FOG_PXE_BOOT_IMAGE_32 (this should be init_32.xz) -
[B]This is what I see when I go to /tftpboot basically the same when I go to /var/www/fog/service/ipxe.[/B]
e [ATTACH=full]1220[/ATTACH]
[B]Also what my FOG setting looks like.[/B]
[ATTACH=full]1221[/ATTACH]
FYI, I love this software, and haven’t really had to touch it for a couple years.[url=“/_imported_xf_attachments/1/1220_bzimage.png?:”]bzimage.png[/url][url=“/_imported_xf_attachments/1/1221_fog_setting.png?:”]fog_setting.png[/url]
-
if you see the same files in /tftpboot and /var/www/fog/service/ipxe
then you have problems -
I am sorry, like I said yesterday was a bad day to be the net/sys admin. Below it what the ipxe folder looks like.
[ATTACH=full]1225[/ATTACH][url=“/_imported_xf_attachments/1/1225_ipxe.png?:”]ipxe.png[/url]
-
what do the permissions look like on those files?
-
[ATTACH=full]1226[/ATTACH]
[url=“/_imported_xf_attachments/1/1226_ipxe_permission.png?:”]ipxe_permission.png[/url]
-
What if you run LS – L a
-
what do you see if you go to this address [url]http://172.25.0.99/fog/service/ipxe/boot.php?mac=<mac[/url] address of the computer you’re trying to image>&arch=x86_64
-
[quote=“Brad Schumann, post: 34342, member: 471”][ATTACH=full]1226[/ATTACH][/quote]
[ATTACH=full]1227[/ATTACH]
[url=“/_imported_xf_attachments/1/1227_ls-la.png?:”]ls-la.png[/url]
-
[quote=“Junkhacker, post: 34346, member: 21583”]what do you see if you go to this address [url]http://172.25.0.99/fog/service/ipxe/boot.php?mac=<mac[/url] address of the computer you’re trying to image>&arch=x86_64[/quote]
[url=“/_imported_xf_attachments/1/1228_boot.php.htm?:”]boot.php.htm[/url]
-
check on the profile page for that host. is DEFAULT in the Host Kernel field?
-
I have attached the 2 screenshots
[url=“/_imported_xf_attachments/1/1229_host_page.png?:”]host_page.png[/url][url=“/_imported_xf_attachments/1/1230_image_page.png?:”]image_page.png[/url]
-
the first picture shows the problem. it’s trying to boot to a kernel named DEFAULT, but no such file exists. unless you have uploaded a custom kernel that you wish to use with a computer, that field should be blank
-
Your the best…it is now uploading the image to the fog server but it still wants to put it in the /images/dev folder…thoughts, if nothing else I can always rename and move it.
[url=“/_imported_xf_attachments/1/1232_image_dev.png?:”]image_dev.png[/url]
-
now it’s an ftp problem. it could be the password on the storage management page. if your images are being stored on the same server as the fog web server, then it should match the value stored in fog settings>tftp server>FOG_TFTP_FTP_PASSWORD (assuming that one is correct)
