WINDOWS 7 WILL NOT BOOT AFTER DEPLOY
-
Can you try redoing the upload of the image.
But create an upload - debug task, rather than a normal upload task.
Before uploading, you’ll be brought to a “terminal” prompt.
Run the command:
[code]gdisk -l /dev/sda[/code] What’s the output? -
thanks a lot Tom…
Am on it. I’ll let you know once done.
-
Here it is !!!
[ATTACH=full]1133[/ATTACH][ATTACH=full]1134[/ATTACH]
[url=“/_imported_xf_attachments/1/1133_IMAG0068.jpg?:”]IMAG0068.jpg[/url][url=“/_imported_xf_attachments/1/1134_IMAG0070.jpg?:”]IMAG0070.jpg[/url]
-
okay you can cancel the task and reboot that system.
On the system you’re attempting to “download” the image, can you do a “download-debug” and run the same command?
-
Yes Sir,
Will do !!!
-
download-debug !!![ATTACH=full]1135[/ATTACH][ATTACH=full]1136[/ATTACH]
[url=“/_imported_xf_attachments/1/1135_IMAG0071.jpg?:”]IMAG0071.jpg[/url][url=“/_imported_xf_attachments/1/1136_IMAG0072.jpg?:”]IMAG0072.jpg[/url]
-
i believe that at this point, tom would ask you to enter the command “fog” and report on if the download succeeds.
-
Now run fog
-
it did run, i will send you guys pics ones done so that you can see that windows just won’t boot…
it does create the 100 MB Windows reserved partition
and is creating the actual windows installation partition. -
yeap didn’t work
[ATTACH=full]1143[/ATTACH][ATTACH=full]1144[/ATTACH][ATTACH=full]1145[/ATTACH][ATTACH=full]1146[/ATTACH][ATTACH=full]1147[/ATTACH][ATTACH=full]1148[/ATTACH]
[url=“/_imported_xf_attachments/1/1143_IMAG0073.jpg?:”]IMAG0073.jpg[/url][url=“/_imported_xf_attachments/1/1144_IMAG0074.jpg?:”]IMAG0074.jpg[/url][url=“/_imported_xf_attachments/1/1145_IMAG0075.jpg?:”]IMAG0075.jpg[/url][url=“/_imported_xf_attachments/1/1146_IMAG0076.jpg?:”]IMAG0076.jpg[/url][url=“/_imported_xf_attachments/1/1147_IMAG0077.jpg?:”]IMAG0077.jpg[/url][url=“/_imported_xf_attachments/1/1148_IMAG0078.jpg?:”]IMAG0078.jpg[/url]
-
you mentioned UEFI, was that enabled in the bios when the system was working, before you pulled an image from it?
-
What happens if you tell it to run normally
-
[SIZE=12px]Junkhacker[/SIZE]
[SIZE=12px]UEFI was enable in the bios on my source computer, i did the whole installation with the UEFI enable.[/SIZE]
[SIZE=12px]Tom[/SIZE]
[SIZE=12px]It does the same thing windows will not boot, with the commands you guys gave me i was able just to see it step by step but same result.[/SIZE]
[SIZE=12px]To be quit hones and again you guys are the experts but i think it has something to do with :[/SIZE]
[SIZE=12px]* UEFI which i don’t fully understand but i think i read it on a different post.[/SIZE]
[SIZE=12px]* GPT and MBR [/SIZE][SIZE=12px]just to try i am going to disable UEFI and re-install windows completely on a third computer ( same hardware )[/SIZE]
-
Based on the pictures you provided your systems are not booting in Uefi mode because uefi enforces GPT partitions your partitions do not have any GPT set up
-
Your issues appear to me to be more likely related to AVG or some form of antivirus has a driver installed that’s unsigned
-
i just did :
- full windows 64 b pro
- windows updates
- motherboard drivers
No additional software !!!
-
Can you create a separate image but without the
[quote=“AlonsoP, post: 32599, member: 24925”]1.- upload the image right after installing, updating and installing drivers ( no sysprep, nothing )[LIST=1]
[]use Sysprep with the /generalize switch
[]manually delete the [FONT=monospace]??\volume{…}[/FONT] keys in the registry under “HKLM\SYSTEM\MountedDevices”
[*]run the following from an administrator’s console:
[/LIST]
[COLOR=#000000][FONT=monospace]bcdedit /set {bootmgr} device boot[/FONT][/COLOR][FONT=monospace]bcdedit /set {default} device boot[/FONT]
[FONT=monospace]bcdedit /set {default} osdevice boot[/FONT][/quote]BCD commands or registry key edit? My suspicion is it can’t find the device because it’s been removed. Normally BCD will attempt to find it (when it’s generalized) but I’m starting to think the removal of the MountedDevices is part of the problem. it has no idea where to look for the drives. It knows the boot system exists, and probably even knows the location of the “data” partition, but because it doesn’t know about the mounted devices, it fails thinking the device doesn’t exist.
-
Also, before re pushing the image to a system.
Can you reboot, choose boot to disk, and IMMEDIATELY after selecting, keep pressing the f8 key until you see the Windows Multi menu?
Try “Last Known Good Configuration”?
-
Awesome Tom, i am actually building a complete new installation on a different PC same hardware GIGABYTE GA-H61M-S2PV
and do as you suggest. I’ll let you know my findings
Thanks a lot to both of you for taking time and help the community. Fog is an awesome product and like i mentioned before but i had not response. My IT manager is all for donating money to the project but i need to get it working like a charm as i did for XP. We have a massive upgrade to do and on a day to day basis support .
-
Guys,
i have a new PC with the same hardware, no updates and also i disable UEFI, is using legacy. please see the pic … What should i answer ?[ATTACH=full]1149[/ATTACH][url=“/_imported_xf_attachments/1/1149_FreshInstallNoUpdatesNoUEFI.jpg?:”]FreshInstallNoUpdatesNoUEFI.jpg[/url]
