Tftp stops working a few minutes after starting

[Jaymes Driver]

You’re removal never completed, run the purge command again now that you ran the update.

and I enabled portfast on every port I had

[elijahkan14]

"sudo apt-get purge tftpd-hpa
Reading package lists… Done
Building dependency tree
Reading state information… Done
The following packages will be REMOVED:
tftpd-hpa
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 193 kB disk space will be freed.
Do you want to continue [Y/n]?
(Reading database … 154651 files and directories currently installed.)
Removing tftpd-hpa …
dpkg: error processing tftpd-hpa (–remove):
subprocess installed post-removal script returned error exit status 1
No apport report written because MaxReports is reached already
Processing triggers for ureadahead …
Errors were encountered while processing:
tftpd-hpa
E: Sub-process /usr/bin/dpkg returned an error code (1)
"

[Jaymes Driver]

[code]
sudo apt-get -f install tftpd-hpa
sudo apt-get update
sudo apt-get purge tftpd-hpa
sudo apt-get -f tftpd-hpa[/code]

if a command fails then stop and report.

[elijahkan14]

[CODE]sudo apt-get -f install tftpd-hpa
Reading package lists… Done
Building dependency tree
Reading state information… Done
tftpd-hpa is already the newest version.
The following packages will be REMOVED:
tftpd-hpa
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 193 kB disk space will be freed.
Do you want to continue [Y/n]?
(Reading database … 154651 files and directories currently installed.)
Removing tftpd-hpa …
dpkg: error processing tftpd-hpa (–remove):
subprocess installed post-removal script returned error exit status 1
No apport report written because MaxReports is reached already
Processing triggers for ureadahead …
Errors were encountered while processing:
tftpd-hpa
E: Sub-process /usr/bin/dpkg returned an error code (1)[/CODE]

[Jaymes Driver]

see the issue here? it’s not FOG, it’s your Linux Installation, its unhappy for some reason.

[code]
sudo dpkg --configure -a[/code]

[elijahkan14]

Ran that command and then [code]sudo apt-get purge tftpd-hpa[/code] and got the same error.

[Tom Elliott]

elijakan14, are you using dnsmasq?

[url]http://www.linuxquestions.org/questions/linux-server-73/tftpd-problems-with-both-tftpd-hpa-and-atftpd-836330/[/url]

[Jaymes Driver]

This post is deleted!

[elijahkan14]

I don’t think I am, I ran [code]sudo apt-get remove --auto-remove ltsp-server-standalone[/code]
and got
[code]E: Unable to locate package ltsp-server-standalone[/code]

[Jaymes Driver]

try [code] sudo apt -get remove dnsmasq[/code]

[Tom Elliott]

Can you try these commands:
[code]sudo apt-get -f install tftpd-hpa tftp-hpa
sudo apt-get update
sudo apt-get purge tftpd-hpa tftp-hpa
sudo apt-get -f tftpd-hpa tftp-hpa[/code]

[elijahkan14]

[quote=“Jaymes Driver, post: 31612, member: 3582”]try [code] sudo apt -get remove dnsmasq[/code][/quote]

[code]sudo apt-get remove dnsmasq
Reading package lists… Done
Building dependency tree
Reading state information… Done
Virtual packages like ‘dnsmasq’ can’t be removed
The following packages will be REMOVED:
tftpd-hpa
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 193 kB disk space will be freed.
Do you want to continue [Y/n]?
(Reading database … 154651 files and directories currently installed.)
Removing tftpd-hpa …
dpkg: error processing tftpd-hpa (–remove):
subprocess installed post-removal script returned error exit status 1
Processing triggers for ureadahead …
Errors were encountered while processing:
tftpd-hpa
E: Sub-process /usr/bin/dpkg returned an error code (1)
[/code]

[elijahkan14]

[quote=“Tom Elliott, post: 31613, member: 7271”]Can you try these commands:
[code]sudo apt-get -f install tftpd-hpa tftp-hpa
sudo apt-get update
sudo apt-get purge tftpd-hpa tftp-hpa
sudo apt-get -f tftpd-hpa tftp-hpa[/code][/quote]

They all gave the error from before

[Tom Elliott]

What errors?

[elijahkan14]

[quote=“Tom Elliott, post: 31618, member: 7271”]What errors?[/quote]

[code] sudo apt-get -f install tftpd-hpa tftp-hpa: http://gyazo.com/624121cc83380b50b924d864afc966e8
sudo apt-get update runs okay with some errors as expected
sudo apt-get purge tftpd-hpa tftp-hpa: http://gyazo.com/9f9e05815d9b935f205bb276783ef40f
sudo apt-get -f install tftpd-hpa tftp-hpa: http://gyazo.com/33240d9ff9b4e6d22b9e253158ca3b89
[/code]

[Tom Elliott]

I know it’s not optimal, but I would highly recommend reinstalling OS at this point. While I’d love to keep digging to figure out exactly what it will take to fix this, it’s been FAR too long I think.

[Jaymes Driver]

[quote=“Tom Elliott, post: 31625, member: 7271”]I know it’s not optimal, but I would highly recommend reinstalling OS at this point. While I’d love to keep digging to figure out exactly what it will take to fix this, it’s been FAR too long I think.[/quote]

I second this notion -.-

[elijahkan14]

What is the best operating system to use for FOG in your opinion?

[Jaymes Driver]

[quote=“elijahkan14, post: 31627, member: 24797”]What is the best operating system to use for FOG in your opinion?[/quote]

Debian

Make a copy of your /images folder. And export your current database from fog to a flash drive. This will allow us to keep your database and image files to alleviate the stress of setting up a new server

[Tom Elliott]

There is really no “best” OS. I prefer CentOS, but again that’s a matter of preference rather than “the best”. You could try Debian 7.5 for familiarities sake as you’re probably more familiar with Ubuntu style commands.