Adding Images Back in
-
Checked Case sensitive and that is fine. Checked and verified that rec.img.000,sys.img.000 are both present and they are. Can root be the owner on the rec and sys?
[url=“/_imported_xf_attachments/0/973_ScreenShot543.png?:”]ScreenShot543.png[/url]
-
Is the Path in the Image setting set to /images/Optiplex9010I5Catia
-
Yep.
[url=“/_imported_xf_attachments/0/974_ScreenShot544.png?:”]ScreenShot544.png[/url]
-
Last question(s),
Is this image of partimage or partclone format?
Can you run the task as a debug mode. When at prompt, type fog and press enter. Once it fail’s, break out (CTRL+C) and cd to /images/Optiplex3010I5Catia/
Thank you for the patience and understanding.
-
It is a partimage and new development. When it came up with the original error telling me that it was going to restart - I pressed ctrl -c and it rebooted and went through the entire image process - and successfully. I am going to try it again.
-
Ok did it again. Ignore the ctrl-c part … It must have just timed out and rebooted. It errors on first boot and then goes and images once it reboots itself.
-
Sounds like you’re having issues with NFS if you can try and restart the NFS service that would probably help out
-
Restarting NFS didn’t seem to help. Not horribly concerned about this one - it only shows itself to us in IT so waiting for one additional boot cycle isn’t that big of a deal. It looks like we are also getting stuck on the FOG boot menu screen though. If I hit enter on the boot from HD then it just starts the timer over. If I hit escape it blinks a “_” in the top left corner.
-
try changing the exit type
-
Changed it through all 3 and no luck. Grub brought it to grub prompt. Sanboot gets stuck on fog screen and exit just puts up the blinking “_”.
-
Any more ideas?
-
will the computer boot with the network cable unplugged?
-
It’s making me think the partitions are in GPT format
-
Yes it will boot without network cable. GPT is possible - if so what can I do? I will check on GPT.
-
The debug task, there is a program I’ve had in the init for a while called fixparts.
run
[code]fixparts /dev/sda[/code]Make the adjustments as necessary and save. If you do this from an Upload-Debug task, your image will be able to be pushed to clients as well. Once saved all you’ll need to do is run:
[code]fog[/code] And it should upload your data. Then, hopefully, your system will boot properly. -
Two questions.
I have it in debug mode - what do I do now?
Second - do I need to do this to every machine - different image - or just once on a single machine?
[url=“/_imported_xf_attachments/0/989_ScreenShot548.png?:”]ScreenShot548.png[/url]
-
Is there an instruction set on how to use this somewhere?
-
The easiest I can give is to just press the letter w.
-
Do I need to do that on every computer or just a one time deal?
-
Just the one time, because you will upload this “now good” image and push that to your other hosts.
