Fog wont load past kernal_thread_helper+0x6/0x10
-
Ok used nautilus to change the downloaded tom.elliot.32 to bzImage and copied that file to var/www/fog/service/ipxe renamed the original to bzImage<date> and thats that. however when i attempt an image i am still getting bad kernel image. Do i need to reboot? sorry def noob at this
-
Do you have a specific kernel set under the FOG UI for that host??
Also a recheck of what Tom posted above:
[QUOTE]Are you sure you’re using the correct bzImage and init.xz pair? A 32 bit bzImage needs the 32 bit init_32.xz file. A 64 bit bzImage needs the 64 bit kernel.
As you say you’ve upgraded the fog system (I would typically recommend a fresh install) you likely need to adjust the values in FOG Configuration ( ? ) icon -> FOG Settings -> TFTP Server
Make the following changes to the relevant lines:
FOG_TFTP_PXE_KERNEL = bzImage (Exactly, NOT fog/kernel/bzImage)
FOG_TFTP_PXE_KERNEL_32 = bzImage32 (Should already be set)
If using Debian variant (e.g. Ubuntu, Debian, mint):
FOG_TFTP_PXE_KERNEL_DIR = /var/www/fog/service/ipxe/
If using Redhat Variant (e.g. Redhat, Fedora, CentOS, Scientific Linux)
FOG_TFTP_PXE_KERNEL_DIR = /var/www/html/fog/service/ipxe/
FOG_PXE_BOOT_IMAGE = init.xz (Exactly, NOT fog/images/init.gz)
FOG_PXE_BOOT_IMAGE_32 = init_32.xz [/QUOTE] -
I have the init_32.xzfile and i made the changes specified above. I errored by trying to update the kernel from the updater page. the part im at now is should i name the kernel bzImage or bzImage32? this is with the copy and paste method and if i’m not mistaking it has to go to the ipxe folder correct?
-
That depends on which kernel that tom.elliot is.
If it’s 32 bit then it needs to be bzImage32.
-
Just download both kernels from here, keep them named as they show and copy them to the ipxe directory.
[SIZE=13px][FONT=arial][COLOR=#262626]svn.code.sf.net/p/freeghost/code/trunk/packages/web/service/ipxe/bzImage[/COLOR][/FONT][/SIZE]
[SIZE=13px][FONT=arial][COLOR=#262626]svn.code.sf.net/p/freeghost/code/trunk/packages/web/service/ipxe/bzImage32[/COLOR][/FONT][/SIZE]
[SIZE=13px][FONT=arial][COLOR=#262626][/COLOR][/FONT][/SIZE]
-
ok so i am now able to register it and inventory… the last thing i will need assistance with is this. I set a task to upload an image but when the client pxe boots it doesn’t see it and goes to the fog load page. What am i missing?
-
Can you include a screen shot of the task you created?
Are you sure you created a task for the correct host?
Did you get any errors when creating the task?
-
Screenshot after task
[url=“/_imported_xf_attachments/0/666_Screenshot from 2014-04-15 14:57:17.png?:”]Screenshot from 2014-04-15 14:57:17.png[/url]
-
no errors popped up and yes its the only one like it listed in my inventory. I was able to get it there using the quick inventory function
-
Viper, check your DHCP server and make sure it points to undionly.kpxe not pxelinux.0.
If that does not work open a mysql terminal and type [SIZE=13px][FONT=arial][COLOR=#262626]“truncate table tasks” this will clear up any tasks from .32.[/COLOR][/FONT][/SIZE]
If none of that works [SIZE=13px][FONT=arial][COLOR=#262626]what is the output of “[/COLOR][/FONT][/SIZE][SIZE=13px][FONT=arial][COLOR=#262626][url]http://{fogserverip}/fog/service/ipxe/boot.php?mac=XX:XX:XX:XX:XX:XX[/url] spits out (where the x’s are the systems MAC ADDRESS)”[/COLOR][/FONT][/SIZE]
You can type it into any machine on the network.[SIZE=13px][FONT=arial][COLOR=#262626][/COLOR][/FONT][/SIZE]
For the record this is why we recommend a fresh install vs a update when going from .32 to .33b. If you can, back up your images and hosts and do a clean install of .33b and you will not have to hunt down all of these little changes.
-
This post is deleted! -
is that the same as a standard terminal window. where do i find that output? is that something i should see when i first boot?
I will load a new drive and see if i can do a "clean boot later on. -
[url]http://stackoverflow.com/questions/11188351/how-to-run-mysql-in-ubuntu-through-terminal[/url]
instead of select you will run the truncate table tasks.
Google searches will save your life…
as for [SIZE=13px][FONT=arial][COLOR=#262626]“[/COLOR][/FONT][/SIZE][SIZE=13px][FONT=arial][COLOR=#262626][URL=‘http://%7Bfogserverip%7D/fog/service/ipxe/boot.php?mac=XX:XX:XX:XX:XX:XX’]http://{fogserverip}/fog/service/ipxe/boot.php?mac=XX:XX:XX:XX:XX:XX[/URL] spits out (where the x’s are the systems MAC ADDRESS)”[/COLOR][/FONT][/SIZE]
You put that into any browser on any client on the network, replace {fogserverip} with your fog servers IP address, and replace [SIZE=13px][FONT=arial][COLOR=#262626]“[/COLOR][/FONT][/SIZE]
[SIZE=13px][FONT=arial][COLOR=#262626][URL=‘http://%7Bfogserverip%7D/fog/service/ipxe/boot.php?mac=XX:XX:XX:XX:XX:XX’]XX:XX:XX:XX:XX:XX[/URL] spits out (where the x’s are the systems MAC ADDRESS)” with the systems mac address.[/COLOR][/FONT][/SIZE] -
Ok Starting from scratch new drive, new install of ubuntu 12.04LTU and fog 0.33b installed from script. made the following changes thus far.
"FOG_TFTP_PXE_KERNEL = bzImage (Exactly, NOT fog/kernel/bzImage)
FOG_TFTP_PXE_KERNEL_32 = bzImage32 (Should already be set)
If using Debian variant (e.g. Ubuntu, Debian, mint):
FOG_TFTP_PXE_KERNEL_DIR = /var/www/fog/service/ipxe/
If using Redhat Variant (e.g. Redhat, Fedora, CentOS, Scientific Linux)
FOG_TFTP_PXE_KERNEL_DIR = /var/www/html/fog/service/ipxe/
FOG_PXE_BOOT_IMAGE = init.xz (Exactly, NOT fog/images/init.gz)
FOG_PXE_BOOT_IMAGE_32 = init_32.xz
"
when i try to pxe a client pc it doesnt reach the fog. It gives me no tf
no network found
pxe t01 not found
network not found -
check to make sure your tftp server service is running
-
What should my [FONT=Ubuntu][COLOR=#333333] FOG_TFTP_PXE_CONFIG_DIR be?i noticed its different than before[/COLOR][/FONT]
-
i don’t believe it is used in 0.33b, it’s a holdover from when fog used pxelinux
-
ok. so it appears i’m having the same issue as some one was in this thread…“[url]http://fogproject.org/forum/threads/fog-33b-pxe-boot-woes.10292/[/url]” I tried restarting my tftpd-hpa but it didnt make any change
-
TFTP.
PXE-T01: File not found
PXE-E3B: TFTP Error - File not found -
there insnt a /tftpboot/pxelinux.cfg/ file anymore…? should there be one in my tftpboot folder?