Dell Latitude E7240 imaging problem
-
I’m very sorry about that! I think it’s due to the 4k Advanced Format Drives though. Not so much the fact that it’s SSD.
-
[quote=“Tom Elliott, post: 17767, member: 7271”]I’m very sorry about that! I think it’s due to the 4k Advanced Format Drives though. Not so much the fact that it’s SSD.[/quote]
Thanks Tom your bzimage worked for me too.
The 7420 I was setting up did have an SSD, however it was only 120GB, and it imaged just fine. I checked and the SSD is a 4K drive, so not sure why jjacobs didn’t work. This is the disk:
[url]http://www.liteonssd.com/msata-ssd/item/msata-ssd/m2m.html[/url]
-
[quote=“Tom Elliott, post: 17757, member: 7271”]Can you try my all-net kernel?
[url]https://mastacontrola.com/fogboot/kernel/bzImage[/url] It’s based on core, has no modesetting, and should contain all possible network drivers built in.[/quote]
Tom, thank you very much for the kernel.
This kernel also works for a Dell Latitude E5540 with hybrid HDD. -
Glad I could be of help.
-
Hi Tom,
I’m getting the same NIC error on a Dell Latitude E5440 so I tried your kernel from [URL=‘https://mastacontrola.com/fogboot/kernel/bzImage’][I][SIZE=12px]https://mastacontrola.com/fogboot/kernel/bzImage[/SIZE][/I][/URL] but unfortunately it just causes a kernel panic before booting fully. Any suggestions?
Thanks,
Eoin -
Replace the bzImage part of the link with bzImage32, then copy that file as bzImage on your fog server.
-
It’s in 640x480 but that has worked a treat Tom, thank you very much! Is this because there is a 64bit driver in there somewhere that is incompatible? Also, how often do you release your own new kernels?
Cheers,
Eoin. -
No, it’s because in 0.33 we’ve moved to a pure 64 bit system. The bzImage file on my site is 64 bit, while your init.gz/xz file is 32 bit only.
-
So if I moved to 0.33 I could use that first bzImage?
Thanks,
Eoin. -
Yes, unless you wanted to use 32 bit stuff, in which case you would use the init_32.xz with the bzImage32.
-
Great, thanks very much for all the help - really appreciate it as I am at a customer site today and on a deadline!
-
Tom, thanks very much for the updated kernel. I’m a new user (about 2 months) and we are now receiving shipments of Dell E7240’s so this was very timely help. Awesome! I downloaded fog 0.33b and will be testing that soon. I’d been looking at fog for a long time and finally got approval when updating Ghost’s WinPE image for new nics became too troublesome. Great work to all involved in the project. Thanks again!
-
Tom,
We’re running into this same issue with some Latitude E7240 we have. I went to download your all net kernel from the link above and am getting a 403 Forbidden error. Is there a new location to download the kernel? or can someone that’s using it hook me up with a copy?Thanks for the Help!
-
You can download the kernel from here too
[URL=‘http://sourceforge.net/projects/freeghost/files/Kernels/’]sourceforge-link[/URL]
