• Recent
    • Unsolved
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login

    HP EliteDesk 800 G1 SFF

    Scheduled Pinned Locked Moved
    Hardware Compatibility
    4
    13
    13.9k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      madeyem
      last edited by

      Hi everyone,

      I just want to confirm, that the quite new HP desktop model “HP EliteDesk 800 G1” is working properly with FOG 0.32 (Kernel 3.8.8). I tested it with the Small-Form-Factor version. I have the same model as a normal tower machine and will test it as well in the future.

      Maybe someone with Wiki access can add the “HP EliteDesk 800 G1 SFF” to the working devices.

      Thanks.

      Edit (October 21st 2013):
      According to JimW the tower version also works with FOG 0.32 and kernel 3.8.8. See post #9 in this thread.

      Edit2 (October 23rd 2013):
      I now can confirm that, too.

      1 Reply Last reply Reply Quote 0
      • J
        JimW
        last edited by

        Has anyone had any luck with the tower form factor of this machine? “HP EliteDesk 800 G1 TWR”. Also running FOG 0.32 (Kernel 3.8.8) here, and I can’t even get it to run the client system information, much less deploy/upload an image.

        If I have a USB keyboard connected, it hangs up at one point:
        [ATTACH]419[/ATTACH]

        If I disconnect all USB devices and just use a PS/2 keyboard, I get a little further, but as shown in “HP800-PS2.JPG”, I still get hung up at:
        [3.593827] [<c0ec5886>] kernel_thread_helper+0x6/0x10
        [ATTACH]418[/ATTACH]

        This is just launching the client system information option from the FOG menu, but it hangs in the same places if trying to upload or download an image.

        [url=“/_imported_xf_attachments/0/418_HP800-PS2.JPG?:”]HP800-PS2.JPG[/url][url=“/_imported_xf_attachments/0/419_HP800-USB.JPG?:”]HP800-USB.JPG[/url]

        1 Reply Last reply Reply Quote 0
        • Tom ElliottT
          Tom Elliott
          last edited by

          If I’m understanding this properly, maybe your device has USB 3.0 and this is what’s causing the issue?
          It also, seems, as if the kernel panics due to something connected to the usb. What else is usb connected?

          Are the devices that are USB attached, attached to the usb 3.0 ports?

          I’m only going off theories here, so I might be completely wrong. I’ll look into my kernel config to see if they have USB 3.0 support. Something tells me this is the issue! Maybe you can test by changing bios options for those, possible putting in highest spec of usb 2.0 if possible?

          Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG! Get in contact with me (chat bubble in the top right corner) if you want to join in.

          Web GUI issue? Please check apache error (debian/ubuntu: /var/log/apache2/error.log, centos/fedora/rhel: /var/log/httpd/error_log) and php-fpm log (/var/log/php*-fpm.log)

          Please support FOG if you like it: https://wiki.fogproject.org/wiki/index.php/Support_FOG

          1 Reply Last reply Reply Quote 0
          • M
            madeyem
            last edited by

            I haven’t tested it yet with the tower version, but when I do and somehow figure it out, I will post that here.

            1 Reply Last reply Reply Quote 0
            • J
              JimW
              last edited by

              The machine does have USB 3.0 on front and back. The panic happens even when I have no USB devices connected at all. The only options I have to deal with the USB ports in BIOS are to either disable individual ports, or disable each of the three controllers. I tried disabling just the USB 3.0 ports, and I also tried disabling all 3 controllers. I’m still getting a kernel panic either way, though it’s hanging at a different line number now (with the same message). This is where I end up with all 3 USB controllers completely disabled in BIOS:

              [3.590963] [<c0ec5886>] kernel_thread_helper+0x6/0x10

              I’ll try physically disconnecting the USB headers on the board and see what happens.

              1 Reply Last reply Reply Quote 0
              • Tom ElliottT
                Tom Elliott
                last edited by

                Does the BIOS have an option for supporting legacy? Maybe it’s failing due to that.

                Also, can you try another kernel:

                [url]https://mastacontrola.com/fogboot/kernel/bzImage[/url]

                It’s built on 3.11.5, currently, and has all network drivers for built-in and USB.

                Maybe this will work for you?

                Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG! Get in contact with me (chat bubble in the top right corner) if you want to join in.

                Web GUI issue? Please check apache error (debian/ubuntu: /var/log/apache2/error.log, centos/fedora/rhel: /var/log/httpd/error_log) and php-fpm log (/var/log/php*-fpm.log)

                Please support FOG if you like it: https://wiki.fogproject.org/wiki/index.php/Support_FOG

                1 Reply Last reply Reply Quote 0
                • J
                  JimW
                  last edited by

                  Unplugged the front USB header (and front audio just in case), and still no luck. Not surprising I guess, since the BIOS should have been ignoring them anyway after I disabled them, but it was worth a shot. The only other USB-related option I have in BIOS is to enable or disable the “USB EHCI Port Debug”, which is disabled by default.

                  One thing I did notice, is that each of the three USB controllers has both USB2 and USB 3 ports on the same controller. I could see that as being unusual, but I’d think with the controllers disabled that it shouldn’t continue to happen.

                  1 Reply Last reply Reply Quote 0
                  • J
                    JimW
                    last edited by

                    [quote=“Tom Elliott, post: 18402, member: 7271”]Does the BIOS have an option for supporting legacy? Maybe it’s failing due to that.

                    Also, can you try another kernel:

                    [url]https://mastacontrola.com/fogboot/kernel/bzImage[/url]

                    It’s built on 3.11.5, currently, and has all network drivers for built-in and USB.

                    Maybe this will work for you?[/quote]

                    Legacy USB? No, I don’t see any options for that like I’ve seen in older BIOS’s. However, I am set to use “Legacy Support” instead of “Secure Boot” in the Secure Boot configuration, since we’re using Win7, not Win8. I know 0.32 / 3.8.8 still doesn’t support UEFI, but I haven’t had issues with the HP 8300’s in this same configuration as long as I was using MFT instead of GPT on the disk.

                    I’ll try the kernel upgrade here in a bit and let you know.

                    Thanks for the help, by the way!

                    1 Reply Last reply Reply Quote 0
                    • J
                      JimW
                      last edited by

                      So I’m an idiot, and I’m sorry for wasting your time. I was using the “client system information” option from the FOG menu to test with… which was still set to use our old pre-3.8.8 kernel version. Somehow I had it in my head that changing the kernel path in the web UI would magically change the settings in the menu. Duh. Sorry about that. I kicked off an upload task so the client would actually use 3.8.8 and it’s working fine.

                      So yeah, I can confirm now that both the SFF and TWR form factors of the HP EliteDesk 800 G1 work like a champ with 0.32 / kernel 3.8.8, even with USB 3.0 enabled and devices plugged into the 3.0 ports.

                      Madayem, feel free to edit your initial post with this info so people don’t have to slog through my idiocy. 🙂

                      Color me embarrassed.

                      1 Reply Last reply Reply Quote 0
                      • S
                        Sharo
                        last edited by

                        [quote=“JimW, post: 18405, member: 15518”]So I’m an idiot, and I’m sorry for wasting your time. I was using the “client system information” option from the FOG menu to test with… which was still set to use our old pre-3.8.8 kernel version. Somehow I had it in my head that changing the kernel path in the web UI would magically change the settings in the menu. Duh. Sorry about that. I kicked off an upload task so the client would actually use 3.8.8 and it’s working fine.

                        So yeah, I can confirm now that both the SFF and TWR form factors of the HP EliteDesk 800 G1 work like a champ with 0.32 / kernel 3.8.8, even with USB 3.0 enabled and devices plugged into the 3.0 ports.

                        Madayem, feel free to edit your initial post with this info so people don’t have to slog through my idiocy. 🙂

                        Color me embarrassed.[/quote]

                        Hello,

                        I have a HP 600 G1 that is hanging on the same point (for upload, and Client system information). Can you please clarify what was the fix for this?

                        Thanks!

                        1 Reply Last reply Reply Quote 0
                        • Tom ElliottT
                          Tom Elliott
                          last edited by

                          It sounds like the fix was to update the kernel. You can try mine at: [url]https://mastacontrola.com/fogboot/kernel/bzImage[/url], or you can download the latest from FOG Sourceforge 3.8.8 from the FOG Web GUI under “Other Information” (?) icon->kernel update.

                          Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG! Get in contact with me (chat bubble in the top right corner) if you want to join in.

                          Web GUI issue? Please check apache error (debian/ubuntu: /var/log/apache2/error.log, centos/fedora/rhel: /var/log/httpd/error_log) and php-fpm log (/var/log/php*-fpm.log)

                          Please support FOG if you like it: https://wiki.fogproject.org/wiki/index.php/Support_FOG

                          1 Reply Last reply Reply Quote 0
                          • J
                            JimW
                            last edited by

                            [quote=“Sharo, post: 23153, member: 22308”]Hello,

                            I have a HP 600 G1 that is hanging on the same point (for upload, and Client system information). Can you please clarify what was the fix for this?

                            Thanks![/quote]
                            Yes, sorry, kernel 3.8.8 worked fine.

                            1 Reply Last reply Reply Quote 0
                            • S
                              Sharo
                              last edited by

                              [quote=“JimW, post: 23671, member: 15518”]Yes, sorry, kernel 3.8.8 worked fine.[/quote]

                              Yes, it sure did! Thanks!

                              1 Reply Last reply Reply Quote 0
                              • 1 / 1
                              • First post
                                Last post

                              142

                              Online

                              12.1k

                              Users

                              17.3k

                              Topics

                              155.4k

                              Posts
                              Copyright © 2012-2024 FOG Project