SUSE

D8TA

I was looking at the installfog.sh but not sure where or what I need to comment out to skip the httpd and mysql-server checks?

I will start manually installing the above packages and see how things go. keeping my fingers crossed

Jaymes Driver

the package installer and the function to check the installations are included in the fog0.32/lib/redhat.

the config.sh holds the file names to download

the function.sh does the work and the checks.

look for this subroutine:
[CODE]confirmPackageInstallation()
{
for x in $packages
do
echo -n " * Checking package: $x";
rpm -q $x >/dev/null 2>&1;
if [ “$?” != “0” ]
then
echo “…Failed!”
exit 1;

    else
        echo "...OK";
    fi
done;

}[/CODE]

Should be close to the bottom.

I would edit it to read [code]
confirmPackageInstallation()
{
for x in $packages
do
echo -n " * Checking package: $x";
rpm -q $x >/dev/null 2>&1;
if [ “$?” != “0” ]
then
echo “…Failed! But continuing setup! CHECK FOR RUNNING SERVICES MANUALLY!!!”;
else
echo “…OK”;
fi
done;
} [/code]

D8TA

Getting a little further.

Configuring services.

Setting up fog user…OK
Setting up and starting MySqlmysqld: unknown service
…Failed!

Tom Elliott

You guys want, I can chime in.

Sorry I wasn’t very communicative so far today, had to drive 2.5 hours down south and then back.

D8TA

I would love all the help I can get right now. Chime away.

Tom Elliott

Well, it sounds like you’ve figured out all the details of the files needed to be installed.

What gets output when you run the command:
[code]cat /etc/release /etc/issue[/code]

D8TA

cat /etc/release /etc/issue
LSB_VERSION=“core-2.0-noarch:core-3.2-noarch:core-4.0-noarch:core-2.0-x86_64:core-3.2-x86_64:core-4.0-x86_64”
cat: /etc/lsb-release.d: Is a directory
SUSE Linux Enterprise Desktop 11 (x86_64)
VERSION = 11
PATCHLEVEL = 3
SUSE Linux Enterprise Desktop 11 (x86_64)
VERSION = 11
PATCHLEVEL = 3

Welcome to SUSE Linux Enterprise Desktop 11 SP3 (x86_64) - Kernel \r (\l).

D8TA

And yet a little further…

Setting up sudo settings…OK
Setting up FOG Snapins…OK
Setting up and building UDPCast…OK
Installing init scriptsFOGMulticastManager: unknown service
FOGImageReplicator: unknown service
FOGScheduler: unknown service
…OK
Setting up FOG Services…OK
Starting FOG Multicast Management Server…Failed!

Tom Elliott

Does SUSE support the service command?

I think you’d need to use /etc/init.d/<filename> restart for this to work on your particular system.

D8TA

I reached the webpage I believe I am getting prompted for credentials. I am still having a slight issue with MySQL getting up and running so troubleshooting that at the moment. May call it a day and hit it again tomorrow.

I’ll keep you all posted.

Tom Elliott

Alright, I’ll probably be around more so tomorrow to help out where I can.

D8TA

Well, I thought I had this going. I can’t seem to get the web UI up and running and I noticed there is no MySQL database that was created. Not sure what to do next.

Jaymes Driver

LOL at this point we should start a separate script for installation on SUSE XD

I will see what I can do about the Mysql stuff, I am still trying to get some services installed on my vm

I will crack this open at home and give it a whirl, I will try to fully document the process, maybe we can help create an installer script for suse machines.

D8TA

I am going to try a couple other things and then can post my configs to help out with the installer script.

Jaymes Driver

it’s okay if we beat our head against the wall long enough Tom normally solves it

on a side note I finally got apache working again… time to break some more things maybe MYSQL is next :rolleyes:

D8TA

Installation Started…

Installing required packages, if this fails
make sure you have an active internet connection.

Skipping package: apache2 (Already Installed)
Skipping package: php5 (Already Installed)
Skipping package: php5-gd (Already Installed)
Skipping package: php5-gettext (Already Installed)
Skipping package: mysql (Already Installed)
Skipping package: mysql-client (Already Installed)
Skipping package: php5-mysql (Already Installed)
Skipping package: tftp (Already Installed)
Skipping package: nfs-kernel-server (Already Installed)
Skipping package: vsftpd (Already Installed)
Skipping package: net-tools (Already Installed)
Skipping package: wget (Already Installed)
Skipping package: xinetd (Already Installed)
Skipping package: tar (Already Installed)
Skipping package: gzip (Already Installed)
Skipping package: make (Already Installed)
Skipping package: m4 (Already Installed)
Skipping package: gcc (Already Installed)
Skipping package: gcc-c++ (Already Installed)
Skipping package: htmldoc (Already Installed)
Skipping package: perl (Already Installed)
Skipping package: perl-Crypt-PasswdMD5 (Already Installed)
Skipping package: lftp (Already Installed)
Skipping package: clamav (Already Installed)

Confirming package installation.

Checking package: apache2…OK
Checking package: php5…OK
Checking package: php5-gd…OK
Checking package: php5-gettext…OK
Checking package: mysql…OK
Checking package: mysql-client…OK
Checking package: php5-mysql…OK
Checking package: tftp…OK
Checking package: nfs-kernel-server…OK
Checking package: vsftpd…OK
Checking package: net-tools…OK
Checking package: wget…OK
Checking package: xinetd…OK
Checking package: tar…OK
Checking package: gzip…OK
Checking package: make…OK
Checking package: m4…OK
Checking package: gcc…OK
Checking package: gcc-c++…OK
Checking package: htmldoc…OK
Checking package: perl…OK
Checking package: perl-Crypt-PasswdMD5…OK
Checking package: lftp…OK
Checking package: clamav…OK

Configuring services.

Setting up fog user…Exists
Setting up and starting MySql…OK
Backing up user reports…OK
Setting up and starting Apache Web Serverchown: invalid group: `wwwrun:wwwrun’
…OK
Restoring user reports…OK
Configuring Fresh Clamcp: cannot stat `/etc/sysconfig/freshclam’: No such file or directory
…Failed!
Setting up storage…OK
Setting up and starting NFS Server…OK
Setting up and starting DHCP Server…Skipped
Setting up and starting TFTP and PXE Servers…OK
Setting up and starting VSFTP Server…OK
Setting up sudo settings…OK
Setting up FOG Snapins…OK
Setting up and building UDPCast…OK
Installing init scripts…OK
FOGScheduler: unknown service
…OK
Setting up FOG Services…OK
Starting FOG Multicast Management Server…OK
Starting FOG Image Replicator Server…OK
Starting FOG Task Scheduler Server…Failed!

Not certain how important clamav is but the locations were /etc/init.d/freshclam and /usr/bin/freshclam. Not sure if I am still missing a package on that one.

The Apache Web Server group should be wwwrun:www but I only found one place to place the webuser which is wwwrun.

I open a browser and key in the IP address and then prompted for authentication. I tried what I put into the mysql stuff but still nada so I am going to read the docs again to make sure I didn’t miss anything on the setup stuff.

I am attaching the files I modified for SUSE.

[url=“/_imported_xf_attachments/0/529_Fog.zip?:”]Fog.zip[/url][url=“/_imported_xf_attachments/0/530_Fog.zip?:”]Fog.zip[/url]

Jaymes Driver

I, unfortunately, had many things to do this weekend and the opportunity did not present itself.

That being said, I will be on site with my virtual server tomorrow and I can plug away again

I want to give your script a run and see how she fairs.

D8TA

Just for Giggles to see how everything is suppose to work I stood up a CentOS VM and ran through the installer. Something is missing but I don’t know what on my SLED installation/installer because it doesn’t complete the full installation where you get the address to access the Web UI. It looks like some of the pieces get installed but not everything.

Jaymes Driver

Right, that’s what I’m trying to help you nail down, those missing pieces and to get them jiving.

Did your CentOS install go through well? Is it working?

Because I agree with you, some fundamental pieces seem to be a little difficult to acquire. I’m still working on getting the apache stuff working, I was going to tackle php and things like that today to try to get the web interface working, if time allows

Tom Elliott

I’m willing to chime in here. CentOS probably install installing htmldoc, did you follow the wiki?

You need to have rpmforge repo installed for somethings to install properly on CentOS.

SUSE

148

12.1k

17.3k

155.4k