FOG 1.6.0.158 - Multicast error (session has already started with 0 clients)
-
Hi everyone,
I’m running FOG 1.6.0.158 in a Hyper-V environment on an isolated (internal) network. My DHCP server is Windows Server 2022, and the boot file is ipxe.efi. I’ve tried this on two different Hyper-V hosts; on the second host I also installed the latest dev-branch version, and the issue occurs on both 1.6.0.158 and the dev-branch.
The problem: I create a multicast session with 2 clients and a 10-minute timeout. Then I PXE boot the machines and try to join the multicast session, but I get the message: “That session has already started and can no longer joined.” Meanwhile, the FOG web UI shows 0 connected clients under Tasks / Active Multicast Tasks.
I installed FOG using the default standard install mode (–install-mode standard), and at the end of the installation I let the installer open the required ports in firewalld. The OS is AlmaLinux 9.8, and SELinux is set to permissive. Both servers are fresh installs on a clean AlmaLinux 9.8 system, not upgrades from 1.5. I’ve attached 2 screenshots and a few lines from the multicast log.
Any help solving this would be greatly appreciated.
Thanks,
Miklós

P.S. If you need any other logs, or the status of the services or the multicast session, just let me know and I’ll post them in a reply.