ASSERT_EFI_ERROR Ubuntu 26.04.1 FOG Server 1.5.10.2518

[Paladin1]

Hi;

Objective: Build a “standalone” FOG server environment i.e. one machine as the FOG server and three others as hosts of FOG tasks such as full wipes/capture/deploy I am trying to get the while screen so I can do a registration of a “target” machine. However I am getting the following error(s) instead which I cannot get past.

**iPXE initialising devices…•

autoexec.ipxe… Not found (https://ipxe.org/2d12618e)
/autoexec. ipxe… Not found (https://ipxe.org/2d12618e)
ASSERT c:tedk2\udk2010.sr1.x2\MdeModulePkg\Library\UefiHiilib\Hiilib.c(257): Hii
Handle != ((void ж) 0)

ASSERT_EFI_ERROR (Status = Not Found)
ASSERT c:ledk2\udk2010.sr1.x2\MdeModulePkg\Library\Uef1H11L1b\H11Lib.c(259): IEF
I_ERROR (Status)
ASSERT c:sedk2\udk2010.sr1.x2\MdePkg\Library \BaseL ib\LinkedList.c(60): List 1= ( .(void ) o)*

Reproduction Steps:

Build FOG Server

• Perform a clean Ubuntu Desktop 26.04.1 installation (then reboot machine)
• Open UBUNTU App Centre and perform an Update All to ensure all applications are up to date (reboot machine)
• Run Firmware Updater to bring firmware up to date (reboot machine)
• Open terminal:
  execute sudo apt update && sudo apt upgrade -y
  execute sudo apt autoremove -y

Reboot machine

2)Install FOG
Based on current installation instructions for FOG 1.5:
Install git
clone fog project from github
run the ./installfog.sh bash script

3. Try to register “target” machine
   Check BIOS for
   latest version
   UEFI boot enabled
   PXE boot enabled
   Set boot order so IPv4 and IPv6 are first in boot order

Restart machine and hope for white screen to Register a Host. Get above error. Please note I have tried more flavours of the reproduction steps than Baskin Robbins has ice cream flavours e.g. with/without SecureBoot, DHCP, DNS, router even Ubuntu 24.04.5 and Ubuntu 26.04.1 all with the same errors on my host machine. I even broke down and did an RTFM of fog docs, wiki, and forums.

Fog install log files:
fog_error_1.5.10.2518.log
foginstall.log

[Tom Elliott]

@Paladin1 Thanks for the full logs. The autoexec.ipxe ... Not found lines are normal for your install. The installer removes that file from the TFTP root on purpose.

The ASSERT ... udk2010 ... HiiLib.c lines do not come from FOG or iPXE. They come from the target machine’s own UEFI firmware. iPXE starts, then the firmware fails an internal check and stops.

To narrow it down, please tell us:

• The make and model of the target machine, and its BIOS version.
• A photo of the whole screen, from the first line. We need the line that starts with “iPXE” and shows its version.
• Is any other DHCP server active on that network, such as your router? If yes, what boot file (option 67) does it give out?
• Does the target boot to the FOG menu in Legacy/CSM mode, with UEFI off?

[Paladin1]

@Tom-Elliott

Switching to Legacy worked but I went from white screen to black screen for non registered hosts very quickly.

How do I keep the white screen around longer?

Registration fails but I can’t attach video. Photo below:

Peter

[Paladin1]

For sake of documentation here is the info @Tom-Elliott asked for:

1. The make and model of the target machine, and its BIOS version.

• Dell Model: XPS 8400 BIOS: A14

2. A photo of the whole screen, from the first line. We need the line that starts with “iPXE” and shows its version.
   
3. Is any other DHCP server active on that network, such as your router? If yes, what boot file (option 67) does it give out?

• No the server and hosts are connected to a 5 port unmanaged Gigabit switch with DHCP handled by FOG server.

• Server IPv4 interface is hard coded with address 192.168.3.1 255.255.255.0 (in Settings/Network/Wired Connection 1 IPv4) tab gateway 192.168.3.1

• Other home network is 192.168.2.0 /24 and is only used, via wifi, on periodic basis to download updates.

3. Does the target boot to the FOG menu in Legacy/CSM mode, with UEFI off?

• Yes it boots in successfully but errors out as in reply above.
• Manually adding host on the FOG server, the host boots fine and I successfully captured an image.

[Tom Elliott]

@Paladin1 Thanks, that answers it.

UEFI: Legacy boots and UEFI does not, so the ASSERT is the XPS 8400’s own UEFI firmware. FOG and iPXE cannot fix that. Use Legacy boot for this model.

Menu timeout: In the web UI, go to FOG Configuration > iPXE General Configuration. Set “Menu Timeout” to a larger number of seconds. The default is 3.

Registration error: “Could not determine a suitable disk automatically” means the registration found no disk at that moment. Your capture on the same machine did find a disk, so I need a little more:

• Does registration fail every time, or did it fail once?
• In the BIOS, what is the SATA mode: AHCI, RAID, or ATA/IDE?
• Please run a debug task on that host: Hosts > (the host) > Basic Tasks > Advanced > Debug. At the shell, run lsblk, then dmesg | grep -iE 'ata|sd'. Post a photo of both.