HP compaq Elite 8300

[Timikana]

ok i try tomorrow
Heu Is it possible that there is a conflict between samba server ?

[Timikana]

“Connections refused”

[Timikana]

Hi,
i add in /etc/exports

/images 172.30.105.,(ro,sync,no_wdelay,insecure_locks,no_root_squash,insecure)
/images/dev 172.30.105.,(rw,sync,no_wdelay,no_root_squash,insecure)

and restart nfs-kernel-server

now i have
-permission denied
-bad file descriptor…
… error Connection refused is clear

if i use the fog task DD … dd copy the works …
But how when he tells us “4546654.01 record in and out record” is made
Complete for the task? I should restart? but it will restart and repeat the task?

[Tom Elliott]

When you create a task on fog, it creates a PXE boot file in /tftpboot/pxelinux.cfg/01-<SYSTEM MAC>.

After a task is complete, the system uses FTP to delete the task from that folder. It sounds like FTP is not deleting this task, so anytime that system reboots, it loads the configuration. I’d check that your FTP username and Password are correct. This is done on the server with the username fog.

I’d set the password for the fog user on the server. Something along the lines of:

[code]sudo passwd fog[/code]

It’ll ask for the new password to be entered, then a confirmation. If all is successful, you’ll see a message that tells you that it succeeded.

Then you’ll have to set the FTP passwords for the FOG server to actually use them. This is done in two places both on the Web GUI.

First place is located in: Storage Management-><The storage node>->Username Management and Password Management
Second place is located in: Other/FOG Configuration->FOG Settings->FOG_TFTP_FTP_USERNAME and FOG_TFTP_FTP_PASSWORD

[Timikana]

So if I understand well, I do “sudo …” and then redefined the passwords in:

"Storage Management-> <The storage node> -> Management Username and Password Management
Other / FOG Settings-> FOG Settings-> FOG_TFTP_FTP_USERNAME and FOG_TFTP_FTP_PASSWORD "

restart my task.
but if that does not work, I can do it by hand? with “mv”?
for example:
My images HPWindows7Ubuntu1310

and there currently in
[CODE]images/dev/PC_MAC/Images_MAC_PC.000[/CODE]

I can move through
[CODE]sudo mv images/dev/PC_MAC/Images_MAC_PC.000 /images/HPWindows7Ubuntu1310[/CODE]

in conditions DD shows me “in record, record out.”
I could then turn off the computer and go to the web interface to close the task.

[Timikana]

I managed to deploy!
but in debug mode.

I create an image in debug mode, then deploy in debug mode.

the default does not work:
error during deployment:
[URL=http://www.dump-it.fr/screenshot2013-11-15-12-39-25png/a57aa2ef039b07200e81e352693d052a.png.html][IMG]http://www.dump-it.fr/upload/images/miniatures/a57aa2ef039b07200e81e352693d052a.png[/IMG][/URL]

I also noticed an error on Ubuntu 13.10:
I jpgraph does not work properly. that is to say, no visible graphic.

big thank!