ipxe chain boot.php permission denied on pxe but not autoboot

[george1421]

@DBCountMan said in ipxe chain boot.php permission denied on pxe but not autoboot:

SSLCertificateFile /var/www/fog//management/other/ssl/srvpublic.crt
SSLCertificateKeyFile /opt/fog/snapins/ssl//.srvprivate.key
SSLCACertificateFile /var/www/fog//management/other/ca.cert.pem

Lets start by inspecting these keys, has the file date changed?

If you use ssl and these are self signed certificates, the web browser should show a red mark in the address line to that there is something wrong with the ssl key. You should be able to inspect that ssl key from the browser, lets make sure the expiry date has not been reached. A certificate expiring would also cause this issue.
EDIT: This site shows how to check a certificate expiry date from the fog server linux console https://computingforgeeks.com/how-to-check-ssl-certificate-expiration-with-openssl/

If everything looks good on the certificate side, then lets go and rebuild ipxe that should recreate ipxe with the properly installed certificate.

[DBCountMan]

@george1421 Since I re-ran the fog installer using the -S switch, it rebuilt ipxe and the corresponding certs were regenerated. The file dates themselves are marked with today’s date when they were recreated.

openssl x509 -in /var/www/fog//management/other/ssl/srvpublic.crt -text -noout
Certificate:
    Data:
        Version: 3 (0x2)
        Serial Number:
            *redacted*
        Signature Algorithm: sha256WithRSAEncryption
        Issuer: CN = FOG Server CA
        Validity
            Not Before: Aug 23 12:18:57 2023 GMT
            Not After : Aug 20 12:18:57 2033 GMT
        Subject: CN = <fogserverip>

openssl x509 -in /var/www/fog//management/other/ca.cert.pem -text -noout
Certificate:
    Data:
        Version: 3 (0x2)
        Serial Number:
            *redacted*
        Signature Algorithm: sha512WithRSAEncryption
        Issuer: CN = FOG Server CA
        Validity
            Not Before: Apr 27 20:15:47 2022 GMT
            Not After : Apr 24 20:15:47 2032 GMT
        Subject: CN = FOG Server CA

[george1421]

@DBCountMan And does the files in /tftpboot have todays date too? I was kind of hoping to catch things in a broken state to understand the the symptom vs cure.

[DBCountMan]

@george1421 I probably shouldn’t have re-run the installer but I wanted to see if that would fix it.

ls /tftpboot -lah
total 6.5M
drwxr-xr-x  5 fogproject root 4.0K Aug 23 09:13 .
drwxr-xr-x 29 root       root 4.0K Aug 23 08:24 ..
drwxr-xr-x  4 fogproject root 4.0K Mar 16  2021 10secdelay
drwxr-xr-x  2 fogproject root 4.0K Mar 16  2021 arm64-efi
-rw-r-xr-x  1 fogproject root   39 Aug 23 09:13 autoexec.ipxe
-rw-r-xr-x  1 fogproject root  868 Apr 27  2022 boot.txt
-rw-r-xr-x  1 fogproject root  459 Aug 23 08:36 default.ipxe
-rw-r-xr-x  1 fogproject root  454 Mar 16  2021 default.ipxe.bak
-rw-r-xr-x  1 fogproject root  458 Jun 10  2021 default_usb.ipxe
drwxr-xr-x  2 fogproject root 4.0K Mar 16  2021 i386-efi
-rw-r-xr-x  1 fogproject root 270K Aug 23 08:36 intel.efi
-rw-r-xr-x  1 fogproject root 103K Aug 23 08:36 intel.kkpxe
-rw-r-xr-x  1 fogproject root 103K Aug 23 08:36 intel.kpxe
-rw-r-xr-x  1 fogproject root 103K Aug 23 08:36 intel.pxe
-rw-r-xr-x  1 fogproject root 1.1M Aug 23 08:36 ipxe.efi
-rw-r-xr-x  1 fogproject root 888K Aug 23 08:36 ipxe.iso
-rw-r-xr-x  1 fogproject root 363K Aug 23 08:36 ipxe.kkpxe
-rw-r-xr-x  1 fogproject root 363K Aug 23 08:36 ipxe.kpxe
-rw-r-xr-x  1 fogproject root 362K Aug 23 08:36 ipxe.krn
-rw-r-xr-x  1 fogproject root 362K Aug 23 08:36 ipxe.lkrn
-rw-r-xr-x  1 fogproject root 363K Aug 23 08:36 ipxe.pxe
-rw-r-xr-x  1 fogproject root 400K Aug 23 08:36 ipxe.usb
-rw-r-xr-x  1 fogproject root  26K Aug 23 08:36 memdisk
-rw-r-xr-x  1 fogproject root 301K Aug 23 08:36 ncm--ecm--axge.efi
-rw-r-xr-x  1 fogproject root 268K Aug 23 08:36 realtek.efi
-rw-r-xr-x  1 fogproject root 104K Aug 23 08:36 realtek.kkpxe
-rw-r-xr-x  1 fogproject root 104K Aug 23 08:36 realtek.kpxe
-rw-r-xr-x  1 fogproject root 104K Aug 23 08:36 realtek.pxe
-rw-r-xr-x  1 fogproject root 268K Aug 23 08:36 snp.efi
-rw-r-xr-x  1 fogproject root 268K Aug 23 08:36 snponly.efi
-rw-r-xr-x  1 fogproject root 102K Aug 23 08:36 undionly.kkpxe
-rw-r-xr-x  1 fogproject root 102K Aug 23 08:36 undionly.kpxe
-rw-r-xr-x  1 fogproject root 102K Aug 23 08:36 undionly.pxe
-rw-r-xr-x  1 fogproject root  51K Mar 17  2021 wimboot

[DBCountMan]

Found something interesting. When I first boot the vm and get the initial error, then drop to prompt, I run certstat. The first certstat shows this:

The addressing in .59 is the fog server. Now look at certstat after a successful chain of boot.php:

So I don’t know where that “5e…c9” CA key is from or why it appears initially. Could explain the initial permission denied because the key doesn’t match? BTW the “81…0c” is the SHA key of the cert that is actually being used, I matched it with the cert issued to my browser.

[george1421]

@DBCountMan First let me say this is a new one, that I’ve never seen before. So the rest of this is a lot of pure guessing.

If we reference the ipxe documentation https://ipxe.org/cmd/certstat for certstat something jumps out at me. The definition of permanent:

[PERMANENT] 	The certificate was embedded into iPXE at build time. 

This is a certificate that was added when ipxe was compiled. For the one that no work, it has a permenent id of 5e…c9 for the CA certificate. In the one that works the permanent one is 81…0c (which is also what your browser is reporting.

So if we build a truth table on this, it points that you might have 2 ipxe boot loaders at play here (because we are seeing two different certificates). So the question is how can we tell?

ideas from the ipxe console:

1. Seeing if you have multiple dhcp servers responding here? There should be a way to see dhcp option 66 and 67
2. Seeing if there is a way to find the boot loader name or version number or build number to see if a second ipxe boot loader is in play
3. The one working vs not working is the platform different uefi vs bios?

[Sebastian Roth]

@DBCountMan When you re-run the installer the iPXE buildscript is called and should use /opt/fog/snapins/ssl/CA/.fogCA.pem to embed into the compiled binary (code ref). That file is being copied to /var/www/fog/management/other/ca.cert.pem by the installer but only on the very first install run or if you force it to - don’t do that without knowing exactly what you do and having backup copies of all the files!! (code ref).

I suggest you compare the fingerprints of those two files - should be identical:

openssl x509 -in /opt/fog/snapins/ssl/CA/.fogCA.pem -noout -fingerprint
openssl x509 -in /var/www/fog/management/other/ca.cert.pem -noout -fingerprint

[DBCountMan]

@Sebastian-Roth @george1421
Guess what? The key ID of 5e…c9 belongs to my secondary FOG server. Somehow it was getting mixed into the pxe request chain. My DHCP server is configured to send pxe requests to my primary FOG server only. I have no reference to my secondary server anywhere in the tftp configuration. Very strange. I use dnsmasq because for some reason tftpd didn’t play nice with our DHCP server. I had dnsmasq running on the secondary server and thus is somehow received pxe requests.

Disabled the service on the secondary FOG server and now pxe works flawlessly.

The only reason I left dnsmasq running on the secondary is for redundancy. I replicate my primary to my secondary. Since any time I use the USB boot method outside the subnet of any FOG server, the ipxe boot process will ask for an IP. What I thought I could have is the option to boot from the secondary in case the primary was out of service. I also incorrectly thought that dnsmasq is required but since the USB boot method takes care of ipxe, its just an HTTPS connection from there.

So again I thank you guys for helping me figure this out.

[george1421]

@DBCountMan Now that you know the root of the problem, you can/could bring everything back together by syncing the certificates and ipxe boot files from your primary FOG server to your secondary FOG server. The issue as you found is two different certificates on your campus.

[DBCountMan]

@george1421 That would be the next step. When I said “replicate” I meant that I have a cron sync from primary to secondary every night, not instantly. So lets say I set up both servers to accept ipxe req’s and a field tech loads a new image on the primary at 10am and wants to deploy them to 20 PCs in the field. Primary FOG server takes a dump. The secondary FOG server won’t have the image until midnight. So there’s one issue. Unless I set cron to sync every hour or 30min. Another issue I found with rsync as much as I love it, is that if the primary server goes offline, the secondary, which has the /images nfs share from FOG1 mounted, will appear empty, and rsync will sync an empty dir to its own /images, thus wiping out that folder. I read that rsync can be tuned to not sync if a directory is empty but I have to research and test.