M.2 not recognised during deploying stage
-
@sebastian-roth Is kernels/bzImage-5.10.19-Lexar_M.2 supports both HDD’s and M.2 variants?
-
@Dinesh said:
Is kernels/bzImage-5.10.19-Lexar_M.2 supports both HDD’s and M.2 variants?
Yes, it’s the standard kernel we use fog HDD, SSD and M.2. I simply added the patch to support the “Lexar NM700 256GB M.2 SSD” drive mentioned in this topic. Nothing more or less.
-
@sebastian-roth But few systems having the Samsung 512 M.2 and 1000 Gb Toshiba HDD having in few more systems. is this Kernel support for that variant?
-
@dinesh This patch only added additional support, it didn’t remove anything that was working previously.
If you encounter other devices that don’t work you can mention them here of course so we can investigate.
-
@dinesh said in M.2 not recognised during deploying stage:
But few systems having the Samsung 512 M.2 and 1000 Gb Toshiba HDD having in few more systems. is this Kernel support for that variant?
I have no idea. As I said, this kernel is very close to the standard 5.10.19 kernel we officially provide - except that it has a patch included that will make the “Lexar NM700 256GB M.2 SSD” work that had an issue on the plain 5.10.19 kernel.
I am not going to answer any more questions about what disk is supported or not. Just try it out or leave it.
-
@sebastian-roth Thanks for your valuable reply…
-
@dinesh Can I ask what exactly you were hoping for here?
Not only do you give very little information, you also seem to assume that we know everything the Linux kernel supports. We don’t. We are not involved with developing the Linux kernel, we only use it as part of FOS.
There are hundreds (if not thousands) different kinds of M.2 Samsung SSDs, nevermind new ones coming out constantly.
There are thousands (if not tens of thousands) different kinds of Toshba Hard Drives, with new ones still coming out.
There are tons of different ways to connect them. They could be behind software raid, hardware raid, connected to some PCIE board, basic SATA connector, SAS connector, U.2 connector, etc
It’s unreasonable to assume we can just know what will work and what will not.
Just try, it either works or not.
-
@quazz Too add on a bit,
If you find something that doesn’t work, let us know. We will most likely request some more technical information so that we can do the research to find out if there’s a way to add it, or a patch we can use to incorporate, or we will find there is nothing we can do currently.
The point here is, you’re absolutely correct: We don’t know what will or will not work. We have some good google fu and only a few developers and testers working to get information so we can be as hardware agnostic as possible. But we aren’t all knowing. We know a new version was released and do our best (granted I’ve been slacking lately I suppose) to keep the kernels updated and including anything that maybe missing that we can add.
If it works, YAY, if it doesn’t, and we say try this kernel, if it works YAY, if it doesn’t let us know. We’ll ask for information and probably even walk through what we need and how to get it. Then we’ll try to find out information and give back whether or not we can do anything, and if we were able to do it, to test out the new thing. If it works, YAY, if it doesn’t rinse and repeat.
