Fog wont install
-
sorry for the late reply. i connected to the router that connects me to the modem.i know that mysql is working because when enter mysql in the command line,it dosen’t give me any errors.
I downloaded the rpms for mysql and that didn’t work. the command you gave me finally worked.
i disabled iptables and selinux some time ago. -
Okay,
Is there any way you’d be able to allow remote access that I could actually take a look at the file/install process?
There shouldn’t be any problem with installing, so it seems there’s a borked command in the installer somewhere, I just don’t know where. I’m running on CentOS 6.4 and I haven’t run into any issues. I’m also running/testing 0.33 so I’m not a good example.
-
0.33?How do you download that
-
Are you trying to do this install from your home system?
Give me a minute or two and I’ll post the latest and greatest that I’ve created.
I don’t know if it will work, but it will contain many of the Fixes I’ve already implemented.
-
Ready for download:
-
getting the same error.I will remove mysql and see what happens this time
-
This post is deleted! -
Any luck yet?
What do you mean remove MySQL? Do you mean you’re uninstalling it, or not allowing fog to deal with the install of it?
Also, did you find your private IP for your system? The sock isn’t going to connect on your public IP address which could be your entire holdup.
My best suggestion is to find out what IP’s your router distributes for DHCP. (Usually something like: 192.168.1.100 thru 192.168.1.200)
Then statically set your FOG Server’s IP to something out side that scope (Like : 192.168.1.10)
Then when you go thru the installer, set your Server’s IP Address to 192.168.1.10
Your Router IP Address would then be set to 192.168.1.1
Your DNS IP would then be 192.168.1.1Because you’re not trying to access your fog system using the internet, (your public IP Address), the system shouldn’t have any issues finding your system during the mysql part. Then again, I don’t know, I’m not there to see the issue either.
-
with 0.33,it dectects my ip and eveything.I have a internet connection.Same error about mysql.
And how to find out my dhcp router ip?
do i go to my router settings? -
and are there alterntives for pxe boot?
-
Are you trying to use your fog server as the DHCP server?
If you are, set the Router IP address to the same as your System.
You said you were behind a router. If that’s the case, chances are your router IP address is 192.168.1.1, but this doesn’t matter.
You’re sure mysql is running?
Do you have the ability to install another OS like CentOS?
I don’t have a copy of Fedora 19 so I can’t test anything out for you. Give me a few hours and I’ll build a VM for it to try to see what you’re seeing.
To find out your router IP, go into the router settings. It will be somewhere, but again I don’t know your router.
-
yes,of course.
-
My router is saying the public ip
-
There are alternatives for PXE boot such as iPXE and GPXE but before you go changing that, lets try getting this working for you.
I’ve still got about an hour or so until fedora 19 is downloaded for me.
Make it just a little bit longer, I’m doing minimal install rather than full DVD disk download.
-
Your router will display the public IP because it’s also connected to the internet, but the LAN side of it is what you’re looking for. You should have both WAN and LAN (WAN is your internet, LAN is your Local Area Network)
-
ok,found that
-
now,even with that ip is still isnt workng
-
Same error with mysql?
-
yes. when it installs the packaegs it keeps installing them even when there already there
is says Checking package: php-mysql…Failed!enter command : yum install php-mysql
Package php-mysqlnd-5.5.3-1.fc19.x86_64 already installed. -
Can you post the exact error message(s)?