Make room on fog server's storage

[Sebastian Roth]

@sjensen See @george1421’s post on options to use with rm. Just be sure you know what you do to not delete things you wanted to keep. It will just be gone…

[sjensen]

I have decided to not remove any images from my fog server, instead i added more hard drive space. I added it through our vm console then used GParted to extend the drive. However fog is not recognizing the space i added. Is there an additional step or 2 i need to do?

[george1421]

@sjensen You need to extend the file system too. From a virtual machine stand point you extend the vmdk, partition, then the file system. How you extend the file system is based on what filesystem your fog server is using. xfs is the easiest to extend others are not bad either.

[sjensen]

@george1421 and how does one extend a filesystem and find out what fog server is using?

[george1421]

@sjensen well this is a linux issue not specifically a fog issue.

I would look in /etc/fstab to find out what file system your partition is formatted as. Once you know the file system (its probably xfs or ext4) then I can give you a hint how to extend it.

[george1421]

@george1421 Thinking about this you have one more layer in the mix. Since you are using lvm, you need to extend the lvm partition if its not matching the size of the disk.

TBH if this is a vm I would personally just create a new disk and create a standard partition, format it and then migrate your files over to this new disk. I’ve been thinking about creating a new recommendation tutorial to show how I would go about setting up fog to allow storage expansion easily after the fact. LVM adds quite a bit of flexibility but also adds some management overhead that isn’t needed.

[sjensen]

@george1421 sorry sir im very green when it comes to linux im assuming etc/fstab is folder. Not familiar with this command or the command to extend a file system.

[Sebastian Roth]

@sjensen Looking at the pictures you posted it looks like you added space to partition /dev/sda3. That seems kind of strange from my point of view.

It’s very hard to help you in such a situation where we don’t know what exactly was done and how it was initially setup. Lets give it a try nevertheless. Please run the following commands and post all outputs here:

lsblk
pvscan
lvscan
sfdisk -d /dev/sda

[sjensen]

@sjensen thank you

[Sebastian Roth]

@sjensen Just as a precaution - make sure you have a backup copy of all your important data from this system. I won’t be made liable for any steps you take!

So let’s take a look at the whole process of resizing which involves several “layers” - see below.

In the output of pvscan we see that the physical volume on /dev/sda3 is 400 GB in size and has 100 GB free/not in use. So gparted has extended the partition but not the physical volume (in LVM terms). To do that run:

pvresize /dev/sda3

The next step is to tell the logical volume (LV) to use that new space:

lvextend -l+100%FREE /dev/FOGServer-vg/root

As a final step you need to extend the filesystem.

resize2fs /dev/FOGserver-vg/root

Finally check the partition size in the output of df -h.