No network interfaces found when deploying Image

[george1421]

@sysadmin OK then step 2.

If you have a running windows computer on this hardware, go into the device manager and get the hardware ID of this NIC. It will be in the form of VEND and DEV.

AND

Reschedule a capture/deploy to this computer (doesn’t matter which) but before you hit the submit task button, tick the debug checkbox then submit the task. Note: If you did not get to registering this computer go ahead and manually register it with the mac address of the nic interface on this computer

PXE boot the target computer, after a few screens of text that you will need to clear by pressing the enter key you will be dropped to the FOS Linux command prompt. At that command prompt key in and post the results of the following.

ip addr show

lspci -nn | grep -i net

So this network adapter works on other models just not this specific model [Lenovo X1 Carbon 7th Gen (20R1) ]? I’m assuming its either USB or USB-C attached?

Keep the debug console up because there may be other commands you will need to type in.

[sysadmin]

@george1421 I will try this in a moment. Before I do, here’s the adapter. Thank you.

https://www.amazon.com/Lenovo-ThinkPad-Ethernet-Extension-Adapter/dp/B079R19KVN/ref=sr_1_2?dchild=1&keywords=x1+carbon+pxe+adapter&qid=1595372714&sr=8-2

[george1421]

@sysadmin Boy that amazon picture is so bad I can’t tell (visually) what that connector is. From searching the text it appears to be a lenovo unique cable that just extends the build in network adapter wires to an external rj45 jack.

[sysadmin]

@george1421 I think this one might be better.

https://www.lenovo.com/us/en/accessories-and-monitors/cables-and-adapters/adapters/CABLE-BO-Ethernet-Extension-Adapter-2/p/4X90Q84427

[sysadmin]

@george1421

So I get this. Hope it helps.

ip addr show
1: lo: <LOOPBACK, UP, LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1 /8 scope host lo
valid_lft forever preferred_lft forever

After
lspci -nn | grep -i net
00:14.3 Network controller [0280]: Interl Corporation Device [8086:02f0]
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (10) I219-v [8086:0d4f]

For the hardware ID there were 4 values in there under device manager.
PCI\VEN_8086&DEV_0D4F&SUBSYS_229217AA&REV_00
PCI\VEN_8086&DEV_0D4F&SUBSYS_229217AA
PCI\VEN_8086&DEV_0D4F&CC_020000
PCI\VEN_8086&DEV_0D4F&CC_0200

[george1421]

@sysadmin said in No network interfaces found when deploying Image:

8086:0d4f

Interesting that device comes back to
vendor: 8086 (“Intel Corporation”), device: 0d4f (“Ethernet Connection (10) I219-V”)

First introduced into the linux kernel 5.5. You should have downloaded and installed 5.6.7 of the FOS Linux kernel, that should have worked.

From the FOS Linux console, key in uname -a It should print out a version number. Is that version number 5.5 or later?

I can see from the ip a command that the driver for that network adapter isn’t loaded. Lets confirm the version of the kernel that is running. If you still have the 4.19.x series then I understand why its not working.

[sysadmin]

@george1421 It seems I have 4.19.123 x86_64. However when I ran the script I thought I updated.

If I try to update through the FOG GUI I get this error. Not sure what credentials I should be using under TFTP Server.

Type: 2, File: /var/www/html/fog/lib/fog/fogftp.class.php, Line: 464, Message: ftp_login(): Login incorrect., Host: 10.10.20.20, Username: fog

[george1421]

@sysadmin Ok this is going to be a problem once we get past the kernel issue, but that explains why the network adpater isn’t working, simply because linux 4.19.x doesn’t have a valid driver installed.

To address the FTP password problem, follow this tutorial: https://forums.fogproject.org/topic/11203/resyncing-fog-s-service-account-password

Something seems to have gotten out of place.

If this doesn’t work we can always download the kernel manually, but as I said you will run into an issue on the next image capture you do.

[sysadmin]

@george1421 Thank you for your help. I’ll continue with this tomorrow. I have to run some errands and eat something, I’ve been at it for a couple of hours. Thanks again.

[sysadmin]

@george1421 morning. Yesterday I started on this. When I got to step 8 it seems I installed Fog here /opt/fog_stable/bin/installfog.sh.

I get the following error. I don’t recall ever getting this message.

root@fog2:~# /opt/fog_stable/bin/installfog.sh

 * Are you sure you wish to continue (Y/N) Y

 * Installation Started

 * Installing required packages, if this fails
 | make sure you have an active internet connection.

/opt/fog_stable/bin/installfog.sh: line 517: installPackages: command not found

 * Confirming package installation

/opt/fog_stable/bin/installfog.sh: line 521: confirmPackageInstallation: command not found

 * Configuring services

[sysadmin]

@george1421 I assume that the only way to repair this is to reinstall Fog. I am not sure where to start to do this manually. Any pointers?

[george1421]

@sysadmin How did you create this directory /opt/fog_stable Did you clone it from the git repository? Your error is not a very common one or one I’ve personally seen before.