Unable to capture image - Bitlocker Signature detected
-
@jramos76 If the command Tom provided still doesn’t solve the problem we’d need to have a closer look at the partition layout. Please schedule a debug capture task for this machine (as you would a normal capture task but just before you hit the button in the web UI there is a checkbox for debug mode), boot up the machine and hit ENTER twice to get to the console. Run command
sfdisk -d /dev/sda, take a picture of the output and post that here. -
@Sebastian-Roth - Here is the output of the command.
-
Looks like the image is not uploading. I clicked “Upload Image”, but it gives me an error. Any other way to upload the picture?
-
@Tom-Elliott - thanks for the command. I did verify that bitlocker was turned off on the
Drive using the command that @Sebastian-Roth provided. I tried uploading a picture from the debug command, but I don’t think it went through. I’m hoping I can get the picture to you another way. -
@jramos76 Sorry about the picture upload issue. The forum is a bit picky with that and it breaks every now and then. Could you please upload the picture to some share platform and post a link here?
-
@Sebastian-Roth - Thank you for your help with this. I had to disable TPM in the BIOS for the Bitlocker message to go away. Now I have another issue. It goes through capturing the image, but at the end, it says “Could no complete tasking (/bin/fog.upload)” and it has “Error returned: Invalid Storage Group” listed many times above.
-
@jramos76 I understand what the status returned but did you try turning off bitlocker implicitly as I described? There is a reason I gave the command. I think, it too, would have helped. And you wouldn’t have had to disable the TPM.
Glad you found a fix either way there.
-
@jramos76 Good you found a way around the bitlocker issue. I’ll mark this topic solved. May I ask you to open a new one for the next issue? We try to keep things sorted for others to find help in the forums quickly too. Please post the version of FOG you are running in that new topic as well.
-
@Sebastian-Roth Thanks Sebastian! Will do!
-
@Tom-Elliott Hi Tom, sorry, I didn’t reply with that info, but yes, I did run the command you suggested to explicitly turn off bitlocker, but it was still giving me the same error. The error only went away once TPM was disabled in the BIOS. Thanks for your help trying to figure this out!
