Configuring UDPCast fails on Raspberry Pi 4

[Mark Shelton]

@Sebastian-Roth thank you for such a quick answer! It’s 8:44pm where I am in Australia so I’ll make the change tomorrow and see how we go.

[Mark Shelton]

@Sebastian-Roth…and will upload the result from the grep also…

[george1421]

@Sebastian-Roth Both Pi2 and Pi3. But I never used the udpcast from my FOG-Pi servers. I do have a solar powered FOG server though.

[Mark Shelton]

@Sebastian-Roth Output as requested…

processor : 0
BogoMIPS : 108.00
Features : fp asimd evtstrm crc32 cpuid
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd08
CPU revision : 3

processor : 1
BogoMIPS : 108.00
Features : fp asimd evtstrm crc32 cpuid
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd08
CPU revision : 3

processor : 2
BogoMIPS : 108.00
Features : fp asimd evtstrm crc32 cpuid
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd08
CPU revision : 3

processor : 3
BogoMIPS : 108.00
Features : fp asimd evtstrm crc32 cpuid
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd08
CPU revision : 3

Hardware : BCM2835
Revision : c03111
Serial : 10000000a46e436e
Model : Raspberry Pi 4 Model B Rev 1.1

Regards, Mark

[Sebastian Roth]

@Mark-Shelton Thanks for the information. Please let us know if compilation works fine adding the wget commands as mentioned below.

We shall add this as a bug fix soon.

[Mark Shelton]

@Sebastian-Roth I made the changes and re-ran the install. Same result unfortunately.

I have attached the error log and install log[1_1582602880272_fog_error_1.5.7.log](Uploading 100%) [0_1582602880271_foginstall.log](Uploading 100%)

[Mark Shelton]

@Sebastian-Roth fog_error_1.5.7.log foginstall.log

[Sebastian Roth]

@Mark-Shelton Thanks for testing and letting us know. It’s not quite the same result really. The new timestamp is 2008-01-23 this time.

Though it turns out those links have changed as well. Please try changing the wget calls and just to make sure also add the chmod call - then re-run the installer.

wget -qO config.guess "https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess"
wget -qO config.sub "https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub"
chmod +x config.guess config.sub

[Mark Shelton]

@Sebastian-Roth that worked. Thanks very much.

[Sebastian Roth]

@Mark-Shelton Great, thanks for the feedback. I just added a fix to the code.