Printer is apparently added but does not show up as a printer on the Windows 10 machine.

[mckay]

OK. So something else that I have observed.
I changed “Select management level for this host” from “FOG Managed Printers” to “Only Assigned Printers” and it indeed did remove the printers that were there but the printers that have been supposedly added are still not showing up (even after a reboot).

Here is a screenshot:

[Sebastian Roth]

@mckay Have you checked the Printer Management yet? Run printmanagement.msc to open.

What happens if you manually add the printer via the GUI? Does it show up correctly? Stop FOGService on the host for this test.

[mckay]

@Sebastian-Roth - I have run printmanagement.msc and there is no indication that a new printer was added there.

I stopped the FOGService and manually added a printer. It added just fine.

Are there any logs or screenshots that I could send that would be useful for troubleshooting? Thanks!

[Sebastian Roth]

@mckay I am wondering if the port information (WSD-...) is causing it to not being added properly. Now that I have had a closer look at the code I don’t think we properly support WSD-... style at the moment.

Please set Printer Port to IP_10.100.216.133, restart the client and see if it is being added properly.

We will need to add the WSD part to printer helper as well as fog-client…

[mckay]

I made the change you suggested:

Here is what shows up in the log:

------------------------------------------------------------------------------
--------------------------------PrinterManager--------------------------------
------------------------------------------------------------------------------
 12/27/2019 9:37 AM Client-Info Client Version: 0.11.16
 12/27/2019 9:37 AM Client-Info Client OS:      Windows
 12/27/2019 9:37 AM Client-Info Server Version: 1.5.5
 12/27/2019 9:37 AM Middleware::Response Success
 12/27/2019 9:37 AM PrinterManager Adding printers
 12/27/2019 9:37 AM Printer Adding: RP 2 F Printer Test
 12/27/2019 9:37 AM PrinterManager PrintUI return code = 0
 12/27/2019 9:37 AM Printer Adding: SOJO 2F Printer
 12/27/2019 9:37 AM PrinterManager PrintUI return code = 0
 12/27/2019 9:37 AM PrinterManager Restarting spooler
------------------------------------------------------------------------------

Then later:

------------------------------------------------------------------------------
--------------------------------PrinterManager--------------------------------
------------------------------------------------------------------------------
 12/27/2019 9:39 AM Client-Info Client Version: 0.11.16
 12/27/2019 9:39 AM Client-Info Client OS:      Windows
 12/27/2019 9:39 AM Client-Info Server Version: 1.5.5
 12/27/2019 9:39 AM Middleware::Response Success
 12/27/2019 9:39 AM PrinterManager Adding printers
 12/27/2019 9:39 AM PrinterManager RP 2 F Printer Test has already been configured
 12/27/2019 9:39 AM PrinterManager SOJO 2F Printer has already been configured
------------------------------------------------------------------------------

Printers however are still not showing up in “Print Management” or “Printers & Scanners”

Did I make the change correctly? Thanks for continuing to help me out with this.

[Sebastian Roth]

@mckay Settings look fine as I understand it but most probably I am still overlooking something here. Please take a look at printmanagement.msc again. Not just the subtree “Printers” but also in “Ports”. Does the port IP_10... show up here?

Then let’s try to manually add the printer on the command line. Open (non-admin) cmd and run:

rundll32.exe printui.dll,PrintUIEntry/if /b "SOJO 2F Printer" /f "C:\Windows\inf\ntprint.inf" /r "IP_10.100.216.133" /m "HP Universal Printing PCL 6"

Be aware, this can only work if the port IP_10... is defined properly.

[mckay]

Thanks @Sebastian-Roth

Both printer IP addresses are showing up in “Ports” when I check in Print Manager.

I ran the cmd you gave me and it didn’t spit out any error. After a computer restart the printer is still is not listed. Thanks again for your help. I will try manually adding a printer again and check out the settings in Print Manager and see if I can figure out something that might be missing. Please let me know if there is anything that you can think of that I should be looking out for.

[mckay]

So I have been experimenting with different things. I have not figured out anything conclusive but have make some interesting observations:

• When I run the Printer Manager Helper software, it displays a different model depending on the host computer I am running the software from. On one host the model is “HP Universal Printing PCL 6” on another host it is “HP PageWide Pro 477dw MFP PCL-6”. To be clear; this is for the same printer.
• If I manually add the printer to a host, all of a sudden the printers added in FOG will show up on the host computer. This ONLY shows up on the host computer (not other hosts with the same printers added) and the printers only show up if the input for the printer model is correct.
• It does not matter if I list the WSD number for the port or IP_xxx for the port. It will show up either way (as long as the printer has also been manually added)
• If I remove the printers I manually added, the printers that FOG added still show up fine. If I use FOG to remove a printer however, I can no longer add it back using FOG if I already removed the manually added printer.

I know that is probably not much help. I am not sure what more to try. It looks like there is some info that FOG is just not adding to the computer, FOG will only add a printer if the printer has already been manually added. Hope this made sense.

[Sebastian Roth]

@mckay said in Printer is apparently added but does not show up as a printer on the Windows 10 machine.:

FOG will only add a printer if the printer has already been manually added. Hope this made sense.

Does manually added also mean manually installing a driver? FOG does not provide or handle the driver for you! This is something you need to take of yourself!

[mckay]

@Sebastian-Roth I think that was it! I thought the drivers were installed but it looks like HP is weird… generic HP drivers apparently don’t work (that is what I had installed) but if I install their bloatware driver pack all of the printers start showing up.

You are my hero.

Thanks again so much for helping me out with this. I am happy that I have been able to narrow it down.

Sorry for all the time you spend helping me troubleshoot when the solution ended up being something so basic but I really appreciate your help with this.

[Sebastian Roth]

@mckay You are welcome. This is what the forum is all about!

Happy new year!