DHCP works but no internet to clients
-
@george1421 Fedora 30
-
@davidka While I’m a bit baffled why its set. One link I found said to edit vsftpd.confg (should be some place under /etc) and remove or comment out the
tcp_wrappersstatement.Edit: Actually I think it needs to be tcp_wrappers=no the default may be yes
-
@davidka @george1421 We removed the
tcp_wrapper=option from vsftpd.conf in our install scripts just recently because it caused an issue with CentOS 8. It’s very unfortunate that no one noticed this to be an issue in Fedora 30 as well. Just remove the line from the config, restart your FOG server and things should be working. -
@george1421 okay so setting that to NO seems to have done the trick. I can log in to ftp now, and the image capture successfully put the finished image in the images dir. I am now doing my first image restore to a test machine, its looking promising ^_^
-
@davidka Just as an FYI, only the capture uses FTP. The deployment should work just fine. As for the upload residue, you can safely delete the directories that appear as mac address in /images/dev. You can also salvage the upload too but it will take a little manual activity.
-
and now my routing has stopped working again. did’nt notice it because i had to step away for a bit, but the test machine that just imaged has no network access. I also tried another machine that is a known good one and its not getting network either. I can ping the 192.168.1.1 just fine, PXE booting still works, its just now not routing. I mean its better than nothing we can get by with out network on this if it comes down to it. Thank you to every one who has helped me so far.
-
Figured it out, re running the fog installer after messing with the passwords etc reset my option routers in the dhcpd.conf file.