Installation stops during setting up fogproject password
-
It’s in the office, but I can remember the output:
if you know your installation echo output, it “stops” or “waits” at:
create foguser________________________________________________done
setting up fogproject password______________________________
-for complete log I have to wait till monday morning-
-
@Deimos If you look in the directory where you installed fog from in the bin directory (where installfog.sh script is) there should be an error log directory. In that directory is the error logs that explain what happened to the install.
-
i installed fog 1.5.7 (master-branch) 20 hours ago on a freshly downloaded blank debian 10.1
after correct setup and installatoin i ended up with an ftp-upload-failure (ftp says “wrong username for user fogproject”) after imagecapture.
i checked and saw that linux-user fog cant change passwd. but i can change the password for user fogproject with passwd… tried that and testing now.
really strange. other fog-installatoins worked out of the box…
just checked… there is no user fog after the standard-installation in my linux…!!!
-
@edv-schuster said in Installation stops during setting up fogproject password:
just checked… there is no user fog after the standard-installation in my linux…!!!
On fog 1.5.6 and later the linux service account name was changed from
fogtofogprojectbecause there were bad instructions on the internet that said to create the linux userfogand install fog using that account. Part of the install script resets the password on the service account (in the older installsfog) and people would loose access to their linux install. As for 1.5.6 and later the service account is nowfogprojectthe password forfogprojectis in the hidden file/opt/fog/.fogsettingsif you need to reference it. -
@george1421 said in Installation stops during setting up fogproject password:
@Deimos If you look in the directory where you installed fog from in the bin directory (where installfog.sh script is) there should be an error log directory. In that directory is the error logs that explain what happened to the install.
Yes, thanks. I know this, but the Fedora Server is in the office and it’s weekend. I thought may reply was enough for now. I will post the error log tomorrow in the morning.
-
/usr/sbin/iptables /usr/bin/dnf There was no interface with an active internet connection found. Letzte Prüfung auf abgelaufene Metadaten: vor 0:01:48 am Fr 11 Okt 2019 08:47:03 EDT. bc-1.07.1-8.fc30.x86_64 curl-7.65.3-4.fc30.x86_64 gcc-9.2.1-1.fc30.x86_64 gcc-c+±9.2.1-1.fc30.x86_64 genisoimage-1.1.11-41.fc30.x86_64 gettext-0.19.8.1-22.fc30.x86_64 gzip-1.9-9.fc30.x86_64 httpd-2.4.41-5.fc30.x86_64 lftp-4.8.4-3.fc30.x86_64 m4-1.4.18-10.fc30.x86_64 make-4.2.1-13.fc30.x86_64 mariadb-10.3.17-1.fc30.x86_64 mariadb-server-10.3.17-1.fc30.x86_64 mod_ssl-2.4.41-5.fc30.x86_64 mtools-4.0.18-16.fc30.x86_64 net-tools-2.0-0.54.20160912git.fc30.x86_64 nfs-utils-2.4.1-0.rc1.fc30.x86_64 php-7.3.10-1.fc30.x86_64 php-bcmath-7.3.10-1.fc30.x86_64 php-cli-7.3.10-1.fc30.x86_64 php-common-7.3.10-1.fc30.x86_64 php-fpm-7.3.10-1.fc30.x86_64 php-gd-7.3.10-1.fc30.x86_64 php-json-7.3.10-1.fc30.x86_64 php-ldap-7.3.10-1.fc30.x86_64 php-mbstring-7.3.10-1.fc30.x86_64 Letzte Prüfung auf abgelaufene Metadaten: vor 0:01:53 am Fr 11 Okt 2019 08:47:03 EDT. Installierte Pakete php-mysqlnd.x86_64 7.3.10-1.fc30 @updates php-mysqlnd-7.3.10-1.fc30.x86_64 php-process-7.3.10-1.fc30.x86_64 syslinux-6.04-0.12.fc30.x86_64 tar-1.32-1.fc30.x86_64 tftp-server-5.2-27.fc30.x86_64 unzip-6.0-43.fc30.x86_64 vsftpd-3.0.3-29.fc30.x86_64 wget-1.20.3-1.fc30.x86_64 xinetd-2.3.15-28.fc30.x86_64 xz-devel-5.2.4-5.fc30.x86_64 Letzte Prüfung auf abgelaufene Metadaten: vor 0:01:56 am Fr 11 Okt 2019 08:47:03 EDT. Abhängigkeiten sind aufgelöst. Nichts zu tun. Fertig. bc-1.07.1-8.fc30.x86_64 curl-7.65.3-4.fc30.x86_64 gcc-9.2.1-1.fc30.x86_64 gcc-c+±9.2.1-1.fc30.x86_64 genisoimage-1.1.11-41.fc30.x86_64 gettext-0.19.8.1-22.fc30.x86_64 gzip-1.9-9.fc30.x86_64 httpd-2.4.41-5.fc30.x86_64 lftp-4.8.4-3.fc30.x86_64 m4-1.4.18-10.fc30.x86_64 make-4.2.1-13.fc30.x86_64 mariadb-10.3.17-1.fc30.x86_64 mariadb-server-10.3.17-1.fc30.x86_64 mod_ssl-2.4.41-5.fc30.x86_64 mtools-4.0.18-16.fc30.x86_64 net-tools-2.0-0.54.20160912git.fc30.x86_64 nfs-utils-2.4.1-0.rc1.fc30.x86_64 php-7.3.10-1.fc30.x86_64 php-bcmath-7.3.10-1.fc30.x86_64 php-cli-7.3.10-1.fc30.x86_64 php-common-7.3.10-1.fc30.x86_64 php-fpm-7.3.10-1.fc30.x86_64 php-gd-7.3.10-1.fc30.x86_64 php-json-7.3.10-1.fc30.x86_64 php-ldap-7.3.10-1.fc30.x86_64 php-mbstring-7.3.10-1.fc30.x86_64 php-mysqlnd-7.3.10-1.fc30.x86_64 php-process-7.3.10-1.fc30.x86_64 syslinux-6.04-0.12.fc30.x86_64 tar-1.32-1.fc30.x86_64 tftp-server-5.2-27.fc30.x86_64 unzip-6.0-43.fc30.x86_64 vsftpd-3.0.3-29.fc30.x86_64 wget-1.20.3-1.fc30.x86_64 xinetd-2.3.15-28.fc30.x86_64 xz-devel-5.2.4-5.fc30.x86_64 useradd: Warnung: Das Home-Verzeichnis existiert bereits. Es werden keine Dateien vom skel-Verzeichnis dorthin kopiert. Erzeugen der Mailbox-Datei: File exists chsh: Shell nicht geändert. Shell für fogproject ändern.``` -
Hope, this is enough!
-
@Deimos That doesn’t look like the error log, but it does say that no active internet connection found. Does this fog server have internet access either director via a proxy server?
-
Internet access is behind a proxy. I downloaded the latest Fog via git.
-
@Deimos When you installed fog, did/do you have the environment variables setup so that the fog installer can download the needed OS modules from your linux distro’s repo repository?
-
If you mean the proxy’s IP then yes. If you mean the DNS Server’s IP then yes.
If you mean the queries of the installation script, also yes.
-
This is the output of the foginstall.log:
Starting Redhat based Installation FOG Server installation modes: * Normal Server: (Choice N) This is the typical installation type and will install all FOG components for you on this machine. Pick this option if you are unsure what to pick. * Storage Node: (Choice S) This install mode will only install the software required to make this server act as a node in a storage group More information: http://www.fogproject.org/wiki/index.php?title=InstallationModes What type of installation would you like to do? [N/s (Normal/Storage)] We found the following interfaces on your system: * enp0s31f6 - XX.XXX.XXX.XX/24 * wlp2s0 - Would you like to change the default network interface from enp0s31f6 wlp2s0? If you are not sure, select No. [y/N] What network interface would you like to use? Would you like to setup a router address for the DHCP server? [Y/n] What is the IP address to be used for the router on the DHCP server? [] Would you like DHCP to handle DNS? [Y/n] What DNS address should DHCP allow? [XX.XXX.XX.XX] Would you like to use the FOG server for DHCP service? [y/N] This version of FOG has internationalization support, would you like to install the additional language packs? [y/N] *** New option 'hostname' since FOG 1.5.6 *** Would you like to change the default hostname >FOG-LS15nb<? The fully qualified hostname is used for the webserver certificate. If you are not sure, select No. [y/N] ###################################################################### # FOG now has everything it needs for this setup, but please # # understand that this script will overwrite any setting you may # # have setup for services like DHCP, apache, pxe, tftp, and NFS. # ###################################################################### # It is not recommended that you install this on a production system # # as this script modifies many of your system settings. # ###################################################################### # This script should be run by the root user. # # It will prepend the running with sudo if root is not set # ###################################################################### # Please see our wiki for more information at: # ###################################################################### # https://wiki.fogproject.org/wiki/index.php # ###################################################################### * Here are the settings FOG will use: * Base Linux: Redhat * Detected Linux Distribution: Fedora * Interface: enp0s31f6 * Server IP Address: XXXXXXXXXXXXXXXX * Server Subnet Mask: 255.255.255.0 * Server Hostname: FOG-LS15nb * Installation Type: Normal Server * Internationalization: 1 * Image Storage Location: /images * Using FOG DHCP: No * DHCP will NOT be setup but you must setup your | current DHCP server to use FOG for PXE services. * On a Linux DHCP server you must set: next-server and filename * On a Windows DHCP server you must set options 066 and 067 * Option 066/next-server is the IP of the FOG Server: (e.g. XXXXXXXXXXXX) * Option 067/filename is the bootfile: (e.g. undionly.kpxe) * Are you sure you wish to continue (Y/N) * Installation Started * Testing internet connection.................................There was no interface with an active internet connection found. * Adding repository if needed.................................OK * Preparing Package Manager...................................OK * Packages to be installed: bc curl gcc gcc-c++ genisoimage gettext gzip httpd lftp m4 make mariadb mariadb-server mod_ssl mtools net-tools nfs-utils php php-bcmath php-cli php-common php-fpm php-gd php-json php-ld ap php-mbstring php-mysqlnd php-process syslinux tar tftp-server unzip vsftpd wget xinetd xz-devel * Skipping package: bc......................................(Already Installed) * Skipping package: curl....................................(Already Installed) * Skipping package: gcc.....................................(Already Installed) * Skipping package: gcc-c++.................................(Already Installed) * Skipping package: genisoimage.............................(Already Installed) * Skipping package: gettext.................................(Already Installed) * Skipping package: gzip....................................(Already Installed) * Skipping package: httpd...................................(Already Installed) * Skipping package: lftp....................................(Already Installed) * Skipping package: m4......................................(Already Installed) * Skipping package: make....................................(Already Installed) * Skipping package: mariadb.................................(Already Installed) * Skipping package: mariadb-server..........................(Already Installed) * Skipping package: mod_ssl.................................(Already Installed) * Skipping package: mtools..................................(Already Installed) * Skipping package: net-tools...............................(Already Installed) * Skipping package: nfs-utils...............................(Already Installed) * Skipping package: php.....................................(Already Installed) * Skipping package: php-bcmath..............................(Already Installed) * Skipping package: php-cli.................................(Already Installed) * Skipping package: php-common..............................(Already Installed) * Skipping package: php-fpm.................................(Already Installed) * Skipping package: php-gd..................................(Already Installed) * Skipping package: php-json................................(Already Installed) * Skipping package: php-ldap................................(Already Installed) * Skipping package: php-mbstring............................(Already Installed) * Skipping package: php-mysqlnd.............................(Already Installed) * Skipping package: php-process.............................(Already Installed) * Skipping package: syslinux................................(Already Installed) * Skipping package: tar.....................................(Already Installed) * Skipping package: tftp-server.............................(Already Installed) * Skipping package: unzip...................................(Already Installed) * Skipping package: vsftpd..................................(Already Installed) * Skipping package: wget....................................(Already Installed) * Skipping package: xinetd..................................(Already Installed) * Skipping package: xz-devel................................(Already Installed) * Updating packages as needed.................................OK * Confirming package installation * Checking package: bc........................................OK * Checking package: curl......................................OK * Checking package: gcc.......................................OK * Checking package: gcc-c++...................................OK * Checking package: genisoimage...............................OK * Checking package: gettext...................................OK * Checking package: gzip......................................OK * Checking package: httpd.....................................OK * Checking package: lftp......................................OK * Checking package: m4........................................OK * Checking package: make......................................OK * Checking package: mariadb...................................OK * Checking package: mariadb-server............................OK * Checking package: mod_ssl...................................OK * Checking package: mtools....................................OK * Checking package: net-tools.................................OK * Checking package: nfs-utils.................................OK * Checking package: php.......................................OK * Checking package: php-bcmath................................OK * Checking package: php-cli...................................OK * Checking package: php-common................................OK * Checking package: php-fpm...................................OK * Checking package: php-gd....................................OK * Checking package: php-json..................................OK * Checking package: php-ldap..................................OK * Checking package: php-mbstring..............................OK * Checking package: php-mysqlnd...............................OK * Checking package: php-process...............................OK * Checking package: syslinux..................................OK * Checking package: tar.......................................OK * Checking package: tftp-server...............................OK * Checking package: unzip.....................................OK * Checking package: vsftpd....................................OK * Checking package: wget......................................OK * Checking package: xinetd....................................OK * Checking package: xz-devel..................................OK * Configuring services * Setting up fogproject user..................................OK * Locking fogproject as a system account......................OK * Setting up fogproject password.............................. -
@Deimos said:
chsh: Shell nicht geändert. Shell für fogproject ändern.To me it seems like the Fedora
chshtool behaves differnetly than in other distros. @george1421 Could you have a look at this part of the installer to see what the call looks like? -
I browsed the forum a bit and found this problem:
Sebastian Roth: *Screw this !!! I think this was because I have not properly disabled SElinux on that machine! Really strange that this would cause a weird thing.
setenforce 0 and now both ways work for me as well. Thanks a lot for testing and your answers!*
The problem: During the first installation I was asked by the FOG to switch off Selinux, which I did.
-
I disabled selinux manually but I’ve still got the same problem.
-
@Deimos I can’t replicate the issue as described. But from my tests I get the impression that the problem could be one of the two following commands. Please run those two on a root shell on your Fedora server and post the output you get here:
password=$(tr -cd '0-9a-zA-Z!#$%&()*+,-./:;<=>?@[\\]^_{|}~' < /dev/urandom | fold -w12 | head -n1) echo $password echo -e "$password\n$password" | passwd fogprojectCopy and oaste the commands so you don’t mess up with the characters!
-
@Sebastian-Roth said in Installation stops during setting up fogproject password:
echo -e “$password\n$password” | passwd fogproject
[root@fog-ls15nb ~]# password=$(tr -cd '0-9a-zA-Z!#$%&()*+,-./:;<=>?@[\]^_{|}~' < /dev/urandom | fold -w12 | head -n1) echo $password echo -e "$password\n$password" | passwd fogproject [root@fog-ls15nb ~]# echo -e "$password\n$password" | passwd fogproject ändere Passwort für Benutzer fogproject. Geben Sie ein neues Passwort ein: Unsicheres Passwort: Kein Passwort angegeben Geben Sie das neue Passwort erneut ein: Kein Passwort angegeben passwd: Fehler beim Ändern des Authentifizierungstoken -
@Deimos Please try again but copy and paste the commands one line after the other. Looks like the random number generator on your system doesn’t return enough data.
Edit: Even better try this single command:
tr -cd '0-9a-zA-Z!#$%&()*+,-./:;<=>?@[\]^_{|}~' < /dev/urandom | fold -w12 | head -n1Does it return anything??
-
Ok, I will try again. The first command doesn’t reply anything. I had to STRG+C it to continue.
[root@fog-ls15nb ~]# password=$(tr -cd '0-9a-zA-Z!#$%&()*+,-./:;<=>?@[\]^_{|}~' < /dev/urandom | fold -w12 | head -n1) ^C [root@fog-ls15nb ~]# tr -cd '0-9a-zA-Z!#$%&()*+,-./:;<=>?@[]^_{|}~' < /dev/urandom | fold -w12 | head -n1 y*GqYimlF2V~ ^C [root@fog-ls15nb ~]# echo $password [root@fog-ls15nb ~]# echo -e "$password\n$password" | passwd fogproject ändere Passwort für Benutzer fogproject. Geben Sie ein neues Passwort ein: Unsicheres Passwort: Kein Passwort angegeben Geben Sie das neue Passwort erneut ein: Kein Passwort angegeben passwd: Fehler beim Ändern des Authentifizierungstoken [root@fog-ls15nb ~]# -
@Deimos Do you run Fedora on hardware or in some kind of virtualization?
If you don’t Strg+c the
tr -cd ...command how long does it take? Just leave it running till it finishes.
