Image Path Change

pnwbsi

I have an issue where I have to change the image path to get fog to work.

If I am deploying an image I change the image path to /images/dev. If I am capturing an image I have to change the image path to /images/.

What can I do to avoid editing the storage path everytime?

george1421

?? Where are you changing the path value. You should NEVER need to change path

pnwbsi

Under Storage Management > Storage Node > Image Path.

Capture worked fine with /Images as the path. But I could not figure out why deploy did not work. I changed the Image path to /Images/Dev and it worked.

Sebastian Roth

@pnwbsi said in Image Path Change:

Capture worked fine with /Images as the path. But I could not figure out why deploy did not work. I changed the Image path to /Images/Dev and it worked.

You have things mixed up here! Capture should go to /images/dev and deploy comes from /images! Please run cat /etc/exports on your FOG server and post output here.

george1421

@pnwbsi Unless someone changed the exports command, /images/dev is exported as read-write and /images is read-only. It should not be possible to upload an image to /images.

Would you also include a snapshot of the configuration page where the image path is defined?

pnwbsi

@Sebastian-Roth
/images *(ro,sync,no_wdelay,no_subtree_check,insecure_locks,no_root_squash,insecure,fsid=0)
/images/dev *(rw,async,no_wdelay,no_subtree_check,no_root_squash,insecure,fsid=1)

Sebastian Roth

@pnwbsi said in Image Path Change:

I have an issue where I have to change the image path to get fog to work.

Maybe you want to share more information on why you got the impression you had to change the path in the first place. Please post a picture of the error you see/saw.

pnwbsi

Yes, sorry about that.

Updated with pictures:
Capturing image with image path as /images/dev/ — I receive the could not mount images folder error.

Deploying image with image path as /images/ ---- I receive the unable to locate image store.

Early on in troubleshooting I discovered that if I change the storage node image path it would work. So now I have come to find a solution to avoid changing the image path because I know I have a setting wrong somewhere in fog.

Sebastian Roth

@pnwbsi What happens if you set it to /images without the trailing slash?

pnwbsi

That does not change anything. Same issues occur with /images or /images/

Sebastian Roth

@pnwbsi Please run ls -al /images on your FOG server and post the full output you get here!

pnwbsi

george1421

@Sebastian-Roth Are we running into the mount timeout issue we’ve tried to debug before? I also wonder if we could add a bit more debugging information in that unable to find image store message, similar to the when the path was set incorrectly.

Let me see if I can come up with a patched fog.upload

@pnwbsi if you are willing to help us test this, hopefully we can squash this issue once and for all.

Sebastian Roth

@george1421 Definitely a good idea.

@pnwbsi Which version of FOG do you currently run?

pnwbsi

@george1421 I am willing to help in anyway!

pnwbsi

@Sebastian-Roth I am running Fog 1.5.4

pnwbsi

@Sebastian-Roth @george1421 An important thing to add. I just saw that if I have the image path as /Images/Dev/ and I capture (which fails) it claims it can not find the image folder /Images/Dev/Dev. So it is adding an extra /Dev/ in there.

george1421

@pnwbsi said in Image Path Change:

I am willing to help in anyway!

OK I’m going to work on a patched upload file to hopefully give us a bit more details and I’m going to add in a mount delay timeout just to be sure. I should have a little time later this AM to work on it. I’ll follow up with instructions later.

george1421

@pnwbsi I think we have a new fog.download file with some additional debugging output. This file will not fix the issue, but hopefully it will give us an idea what’s happening. We’ve identified the point in the code where it could be failing.

I have this debug mode fog.download file here:
https://drive.google.com/open?id=1yppCONpwr6zCOXA541rhOfiQNb-LoTYS

What I want you to do is download this new fog.download file. Then I want you to follow these instructions to setup a postinit patch. What we are going to do is dynamically replace the current fog.download in FOS Linux with the debug patched version.

https://forums.fogproject.org/topic/13500/dynamically-patching-fos-using-a-postinit-script

You will follow the instructions but replace the top lines to this

# Current File in FOS Linux to be replaced
currfile="/bin/fog.download"

#Patch file to send to FOS Linux virtual hard drive
newfile="${postinitpath}fog.download"

So the testing protocol I want you to use is this:

Confirm you are still getting the error in the picture about unable to mount images folder. Then power off the target computer. Don’t touch the web ui, just power off the target computer.
Setup the patching environment per the tutorial
Download the fog.download file from my google drive and move it into the postinit directory on the fog server.
reboot the target computer
When the target computer throws the error again, snap a clear picture of the debugging information. This output will help us understand why…

pnwbsi

@george1421 I followed your instructions but I am still getting the same error page, not a different debug one. Here is the postinit script I made. I did notice that I do not have a fog.download in my bin and I saw that the script replaces that.

#Current File in FOS Linux to be replaced
currfile="/bin/fog.download"

#Patch file to send to FOS Linux virtual hard drive
newfile="${postinitpath}fog.download"

# ---------------------------------------------
# DO NOT edit any text below this line
# ---------------------------------------------
. /usr/share/fog/lib/funcs.sh

echo "Testing path for our fixed file at ${newfile}"
debugPause

# Test path and run copy if found and matched.
if [[ -r $newfile ]]; then
    echo "Found source file preparing to copy"
    debugPause
    cp -f $newfile $currfile >/dev/null 2>&1
    [[ ! $? -eq 0 ]] && echo "Copy Failed" || echo "Copy Succeeded"
    debugPause
else
    echo "Failed to find file [${newfile}] sorry. Copy Failed"
    debugPause
fi

. ${postinitpath}fog.patch.man.reg

Image Path Change

118

12.1k

17.3k

155.3k