DHCP Lease Failing
-
@Tom-Elliott Yes it does unfortunately. I’m assuming the image deploy works from smaller hard drives onto larger ones? If it does then I could probably capture an image off of this and then deploy to the other one.
-
@Tom-Elliott I am going to capture another image and set it to single disk resizable. I am getting an error though about “The disk contains an unclean file system.”
-
@Brenth453 resizable will be better. I can’t guarantee it’ll work.
-
@Tom-Elliott How do you tell fog to only image the C drive? I can’t use single disk unless I specify the correct disk to capture an image of.
-
Hi guys,
I have the same error, on a new fog server.
Regards,
-
@Brenth453 I was able to use a router as DHCP and it worked flawlessly. Windows is just a flat out sketchy DHCP.
-
@Tom-Elliott Deployed from smaller hard drive image to larger hard drive. Computer is stuck preparing automatic repair and infinite reboots.
-
@Brenth453 I am marking this solved as the initial question indeed is. Please feel free to open a new thread if you still have problems with infinite reboots after deploying to a larger disk.
-
@Brenth453
I have the same problem with a HP Prodesk 400 G3, I make a Bios update and the problem is gone .Hop it’s can help.
I think using a different kernel can help too.
-
Hi again.
Today I need to install some HP Prodesk 400 G4
And the problem come back in both mod (uefi and legacy) I try to check for a Bios update, and I done it but the problem steal here.I already try with a old no managed dumb switch.
In my case I make a upgrade from 1.4.4 to 1.5.5 it was working like a charm with the 1.4.4. Now I have this problem with the 1.5.5.
Any idea ?
