Question about pulling Fog images in from a backup drive.
-
Thanks George, I’ll give this a shot. I’ve already copied the images over to /images/… So now, it’ll be matching everything up.
-
I copied over all the images, but tried one as a test, which was the most important one.
The path of where the img is:
/images/3050Corp
There are 4 files that were copied over
Then I chose Windows 7 as this is a Windows 7 64 bit image, then single disk-multiple partition which was the original settings, Partclone gzip (as these were formerly in Fog v1.2). Then the default for compression, partitions, etc… I I triple-checked the image path, and all was good. Any ideas? -
@dbrilliant said in Question about pulling Fog images in from a backup drive.:
Partclone gzip (as these were formerly in Fog v1.2)
FOG v1.2 is a bit before my time, but I think partclone is right. If it was older then it the cloning tool would be partimage. If your partclone picked image file is not working then try partimage. 4 files sounds like the older format.
Just for comparison reasons, this is the image file format of FOG 1.4.4 created image.
-rwxrwxrwx 1 fog root 3 Apr 5 2018 d1.fixed_size_partitions -rwxrwxrwx 1 fog root 1048576 Apr 5 2018 d1.mbr -rwxrwxrwx 1 fog root 190 Apr 5 2018 d1.minimum.partitions -rwxrwxrwx 1 fog root 15 Apr 5 2018 d1.original.fstypes -rwxrwxrwx 1 fog root 0 Apr 5 2018 d1.original.swapuuids -rwxrwxrwx 1 fog root 9053858 Apr 5 2018 d1p1.img -rwxrwxrwx 1 fog root 8151244586 Apr 5 2018 d1p2.img -rwxrwxrwx 1 fog root 190 Apr 5 2018 d1.partitions -
@george1421 1.0.0 introduced and used partclone. 0.32 and earlier used partimage.
-
@dbrilliant Please run
ls -al /images/3050Corpand post output here. -
grubb@fogserver:~$ ls -al /images/3050Corp total 28377912 drwxrwxrwx 2 grubb grubb 4096 Nov 9 16:07 . drwxrwxrwx 14 fog root 4096 Nov 9 13:43 .. -rwxrwxrwx 1 grubb grubb 512 Jan 26 2018 d1.mbr -rwxrwxrwx 1 grubb grubb 17921802 Jan 26 2018 d1p1.img -rwxrwxrwx 1 grubb grubb 10019524626 Jan 26 2018 d1p2.img -rwxrwxrwx 1 grubb grubb 19021504672 Jan 26 2018 d1p3.img grubb@fogserver:~$ -
@dbrilliant said in Question about pulling Fog images in from a backup drive.:
Then I chose Windows 7 as this is a Windows 7 64 bit image, then single disk-multiple partition which was the original settings, Partclone gzip (as these were formerly in Fog v1.2). Then the default for compression, partitions, etc… I I triple-checked the image path, and all was good. Any ideas?
So far this seems to match the settings. Maybe run
file /images/3050Corp/*and post here as well so we see if the files are actually in gzip compression format.From what you write it sounds as if you still cannot deploy that image to a client, right? So please take a picture of the error you get on screen when the client tries to deploy this image and post here. I am sure we can help you.
-
@Sebastian-Roth said in Question about pulling Fog images in from a backup drive.:
file /images/3050Corp/*
Oh boy, this doesn’t look good:
grubb@fogserver:~$ file /images/3050Corp/*
/images/3050Corp/d1.mbr: DOS/MBR boot sector MS-MBR Vista english at offset 0x162 “Invalid partition table” at offset 0x17a “Error loading operating system” at offset 0x199 “Missing operating system”, disk signature 0x59988117
/images/3050Corp/d1p1.img: gzip compressed data, last modified: Fri Jan 26 11:43:53 2018, max compression, from Unix
/images/3050Corp/d1p2.img: gzip compressed data, last modified: Fri Jan 26 11:44:04 2018, max compression, from Unix
/images/3050Corp/d1p3.img: gzip compressed data, last modified: Fri Jan 26 11:47:46 2018, max compression, from Unix
grubb@fogserver:~$ -
@dbrilliant said in Question about pulling Fog images in from a backup drive.:
DOS/MBR boot sector MS-MBR Vista english at offset 0x162 “Invalid partition table” at offset 0x17a “Error loading operating system” at offset 0x199 “Missing operating system”, disk signature 0x59988117
Not sure if this really is as bad as it sounds. I am wondering about “MS-MBR Vista” and “disk signature 0x59988117”. I am not sure about the later but from memory I’d think that disk signature for MBR disks is different. But maybe this is some other signature unique to your installation, not sure. The other codes could just be information strings that would be shown if the MBR code doesn’t find an operating system or sees an invalid partition table but shouldn’t be used in normal operation.
Edit: I was wrong about the disk signature. Seems fine from what I read here: https://thestarman.pcministry.com/asm/mbr/Win2kmbr.htm#DiskSigs
gzip compressed data, last modified: Fri Jan 26 11:44:04 2018, max compression, from Unix
So GZIP compression sounds good.
-
@Sebastian-Roth Thanks Sebastian,
I will give the next available 3050 I can get to, a thorough test to see if it will download the image. And if I receive any errors, I’ll let you know. -
@Sebastian-Roth -Yes, it’s working now. Once it pulled the image, then it showed the proper size.
-
@dbrilliant I’ve added all the images properly, and will test them out. Thanks all for your assistance.
-
@dbrilliant said in Question about pulling Fog images in from a backup drive.:
Once it pulled the image, then it showed the proper size.
You need to know that the image size in the web UI is only updated when using the image. But it’s not a sign for the image being valid or not.
-
@Sebastian-Roth -465.7 GB
