Acer Veriton N2620G PC flashing like it's on an acid trip!
-
[FONT=Times New Roman][COLOR=#000000]So. Here’s what Acer said the working system has. This leads me to think, perhaps it is a graphics driver problem. [/COLOR][/FONT]
[FONT=Times New Roman][COLOR=#000000]VN262G System Information
System Chipset: Intel NM10
Video Chipset: Intel Atom D400/D500 series on die graphic solution
LAN: Realtek RTL8111E
Audio: Realtek ALC662-VD [/COLOR][/FONT][FONT=Times New Roman][COLOR=#000000]Unfortuntately, it does not appear that Intel has released a linux driver for either chipset or graphics card.[/COLOR][/FONT]
-
Did you try the suggestion in Art Mendoza’s post?
-
To be honest, I don’t quite understand it. Do I mod the FOG kernel to do that?
-
Yes. You need to compile a custom kernel.
Follow the wiki article and grab the latest stable kernel source, which I think is 3.7.8, or if you are already know the 3.3.3 kernel works with most of your devices, grab the 3.3.3 kernel source.
It’s pretty easy from that point on to compile the kernel, just substitute 3.3.3 for the kernel version anywhere the article says a different one.
You may have to install a few pre-reqs before you can compile: gcc, make, git, libqt3-dev, etc that are listed on the wiki or help site about compiling kernels for your distribution.
-
Can I grab the kernel from the fog machine itself? Where do I get it from?
-
[url]http://fogproject.org/wiki/index.php/Building_a_Custom_Kernel[/url]
Article assumes you have make, wget, and g++ tools already installed.
This is step by step pretty much. You can look at [url=“http://www.kernel.org”]www.kernel.org[/url] to find the latest stable kernel, and get the path you need for the wget command.
I copied the core.config file from the /opt/fog-setup/fog_0.32/fog/kernel directory instead of the kitchensink.config because I know from experience it works better for my environment. But you can try the kitchensink.config first if you want.
-
This is the kernel “bzimage” from the update kernel page, yes? Or is that something else?
-
something else.
-
What are the G++ tools I need?
-
the package is called g++ and gcc are both meta packages in Ubuntu that download all the parts…
-
So far, trying what Art Mendoza suggested hasn’t helped. But maybe I didn’t do it right… Back to the drawing board.
-
When I do:
[CODE]lsmod[/CODE]
under the video result is:
[CODE]video 9463 1 i915[/CODE]
I’m guessing that in the kernel config this would be included in the intel 8xx/9xx line.
One interesting notion, when I tried to compile the kernel the first time (using the kitchensink.config), the resulting bzimage was about 6MB less than the “official” 3.6.9 Core.[url=“/_imported_xf_attachments/0/259_Kernel_Help.PNG?:”]Kernel_Help.PNG[/url]
-
OK, mess up on my part. I reread Art’s post. It appears to be working now.
Thank You.