Create Task Capture Error
-
@george1421 I went in to edit the file (only found 1 www.conf btw) and down at the very bottom of the file was the setting for php_admin_value[memory_limit] = 256M and it had “NO” ; in the front of it, also I did not see ANY of this in the file:
pm.max_requests = 2000
pm.max_children = 35
pm.min_spare_servers = 5
pm.start_servers = 5I added this to the end of the file thinking that I needed to put a ; in front of each item and so I did so and rebooted with NO fix. I am still having the issue & btw here is the naming convention for the Image I used WIN1018032 for Image filename and Host is named win10test
-
@butch2861 That is not a normal www.conf file. Those settings must have already been in there. The php_admin_value[memory_limit] is defaulted to 32M and commented out by the line starting with a semicolon. Any text that is preceded by a semicolon is ignored.
Will you upload your www.conf file to the forum here so I can take a look at it. Something is off here.
-
@george1421 I have tried with no luck getting the file onto a usb drive; as I stated I am not a Linux dude…LOL; is it possible to let you onto my pc and SSH into with Putty and check it for me? I am an IT Director for a School District and this Server means alot to me for Imaging; Tom has putty into my machine a couple years ago to help me out and that worked…let me know George; I appreciate you sir.
-
@george1421 I got it George…I puttied into the file and edited it and just copied whole thing into notepad for you; more than 1 way to skin a cat they say…LOL; uploading now.
-
-
@butch2861 OK with the config file the way you have it php-fpm will not start. Remove the following from the bottom of the file.
pm.max_requests = 2000 pm.max_children = 35 pm.min_spare_servers = 5 pm.start_servers = 5Leave the following line
php_admin_value[memory_limit] = 256Mthen reboot the server.
That should allow you to get to the web ui again. Those lines I told you to check are interspersed in the config file.
-
@george1421 I just seen all that and have the file reset to just add the last line in. I had not seen those settings mingled in the text from top to bottom.
-
@george1421 got the file fixed, I can log into the Server just fine through the GUI but I still am getting that error on Uploading and also now downloading an Image to a pc…kinda weird. I made NO changes the last week but it did update maybe a week ago a few files for the Server i ran the git pull and it had a few files to update so I did it…how do I roll back on the Kernel as you were stating?
-
@george1421 George I will be checking back with you tomorrow; I have a migrane working on me so I am heading to the house for the day; Thank You for your help and I look forward to working with you more on this.
-
@butch2861 said in Create Task Capture Error:
Got error ‘PHP message: PHP Fatal error: Uncaught Error: Class ‘ServiceModule’ not found in /var/www/fog/service/servicemodule-active.php
I’d say this is the main issue here. See if you have the file defining that class. Run
ls -al /var/www/fog/lib/client/servicemodule.class.phpand post full result or picture here. -
@Sebastian-Roth I get this ls: cannot access ‘/var/www/fog/lib/client/servicemodule.class.php’: No such file or directory
-
@butch2861 Something went very wrong when installing FOG I’m afraid. You can try fixing this very issue by copying the PHP file over from the source but I wonder why it’s missing. Possibly other parts are also missing? For now try:
sudo -i cd /path/to/git/repo cd packages/web/lib/client/ cp -i servicemodule.class.php /var/www/fog/lib/client/Web GUI issue? Please check apache error (debian/ubuntu: /var/log/apache2/error.log, centos/fedora/rhel: /var/log/httpd/error_log) and php-fpm log (/var/log/php*-fpm.log)
Please support FOG if you like it: https://wiki.fogproject.org/wiki/index.php/Support_FOG
-
@Sebastian-Roth I ran this and got this back:
cp:cannot stat ‘servicemodule.class.php’ :No such file or directory"I can get into Fog via Web GUI and everything seems to work just fine but the Client Capture…
-
@Sebastian-Roth i have 2 files in this dir ‘packages/web/lib/client/’ they are download and index.php
-
@Sebastian-Roth the path may be
/var/www/html/fog/lib/client/servicemodule.class.phpjust for kicks run this command
find /var/www -name servicemodule.class.php
That should give you the full path to the file if it exists in the web services directory. -
@george1421 When I run this command I get back to the prompt and it displays nothing.
find /var/www -name servicemodule.php
I manually went into these dir and could not see it anywhere.
next step? -
@butch2861 Just to be sure I ran that on my FOG server.
find /var/www -name servicemodule* /var/www/html/fog/lib/client/servicemodule.class.phpAnd it was found in that path. I’m almost thinking you have a botched install (but also be aware that the file name you repeated in your last post is incorrect too).
How did you install FOG? Did you use the git method?
-
@george1421 George I ran this command find /var/www -name servicemodule* and it found this:
/var/www/fog/service/servicemodule-active.phpwhen I do an update for Fog I do this procedure that Tom Elliot told me to do:
cd /root/fogproject
git pull
cd bin
./installfog.sh -y -
@butch2861 Yes that is the right process, but it didn’t find the needed file.
I would suggest that you rerun the installer and then confirm that the file exists after running the installer.
cd /root/fogproject/bin ./installfog.sh(note without the -y) make sure the defaults are still accurate. The installer will insert what you answered the first time you ran through the installer for answers.
-
@george1421 okay i re-ran the install and at the end it displayed this and I am still at this point: what do I need to do about the database schema issue?
-
You still need to install/update your database schema.
-
This can be done by opening a web browser and going to:
-
Press [Enter] key when database is updated/installed.
-
