Multi-cast with Location plugin enabled
-
@george1421 the amount of machines vary based on what classrooms are not in use, so it’ll range from 2-300 machines based on how large the classroom’s break is.
-
@wayne-workman said in Multi-cast with Location plugin enabled:
To keep replication of images & snapins working, you’ll have to do cross-group sharing at the image level, you’d do that in image management on each individual image & each individual snapin.
I am having trouble finding this setting in image management, would you be able to illuminate me to where I could find this?
-
@zacadams what version of fog are you using?
-
@tom-elliott I am currently using 1.5.0, I tried using a configuration similar to @Wayne-Workman’s suggestion and the host just seems to stay at the multicast initialization screen but the session never starts.
-
@zacadams what’s the multicast log show?
-
@tom-elliott the log currently is showing:
/var/log/fog/multicast.log [03-26-18 12:17:58 pm] | Task (15) Multi-Cast Task is already running with pid: 18262. [03-26-18 12:18:08 pm] | Task (15) Multi-Cast Task is already running with pid: 18262. [03-26-18 12:18:18 pm] | Task (15) Multi-Cast Task is already running with pid: 18262. [03-26-18 12:18:28 pm] | Task (15) Multi-Cast Task is already running with pid: 18262. [03-26-18 12:18:38 pm] | Task (15) Multi-Cast Task is already running with pid: 18262. [03-26-18 12:18:48 pm] | Task (15) Multi-Cast Task is already running with pid: 18262. [03-26-18 12:18:58 pm] | Task (15) Multi-Cast Task is already running with pid: 18262. [03-26-18 12:19:08 pm] | Task (15) Multi-Cast Task is already running with pid: 18262. [03-26-18 12:19:18 pm] | Task (15) Multi-Cast Task is already running with pid: 18262. [03-26-18 12:19:28 pm] | Task (15) Multi-Cast Task is already running with pid: 18262. [03-26-18 12:19:38 pm] | Task (15) Multi-Cast Task is already running with pid: 18262. [03-26-18 12:19:48 pm] | Task (15) Multi-Cast Task is already running with pid: 18262. [03-26-18 12:19:58 pm] | Task (15) Multi-Cast Task is already running with pid: 18262. [03-26-18 12:20:08 pm] | Task (15) Multi-Cast Task is already running with pid: 18262. [03-26-18 12:20:18 pm] | Task (15) Multi-Cast Task is already running with pid: 18262. [03-26-18 12:20:28 pm] | Task (15) Multi-Cast Task is already running with pid: 18262. [03-26-18 12:20:39 pm] | Task (15) Multi-Cast Task is already running with pid: 18262. [03-26-18 12:20:49 pm] | Task (15) Multi-Cast Task is already running with pid: 18262. [03-26-18 12:20:59 pm] | Task (15) Multi-Cast Task is already running with pid: 18262. [03-26-18 12:21:09 pm] | Task (15) Multi-Cast Task is already running with pid: 18262.``` -
@zacadams so the session is starting. The clients can’t seem to get the traffic from the server. Are the client machines on a separate network from the fog server?
-
@tom-elliott in this particular scenario the host is trying to communicate with the “remote” fog storage node, which is now a master node in it’s own storage group, and is on the same network as the host.
-
I was able to resolve the issue:
One of the problems was that the multicast interface was set to the interface of the main fog sever (a vm running on ens192 interface) to the interface of what my storage nodes would be (physical machines on eno1 interfaces).
The other issue was the MySQL table on the main fog server being not accessible by remote storage nodes.
I could image from the remote storage nodes but the nodes themselves always had shown “A valid database connection could not be made” on the dashboard. The fix for this could be found here under the “Enable remote mysql access” section, granting remote users all privileges. -
@zacadams what user where you using to talk with the dB? You should’ve been using fogstorage which is setup for you during installation.
-
@tom-elliott That is the one I have been using, the passwords were correct on the fog storage node as well.
-
@zacadams Glad you got this figured out.
-
T tag referenced this topic on
