Posts made by zingaro

@george1421 ,
Hi,
with Intel I5/I7 processor the system start correct,
j1900 e3826 reboot (it’s not a fog problem but ACHI driver installed ).

I have problems with only winpe.iso ( standard winpe win7 and winpe 8 32 and 64 bit )

Hi,
I finish two tests with two different PC Intel E3826 and J1900
with first memdisk start but the system not recognize response at " press any key to start DVD ",
the second system reboot when windows logo appears…

:MENU
menu
item --gap – ---------------- iPXE boot menu ----------------
item minipart Partition Manager
item memtest6 MemTEST 6.0
item ghostpe WinPE Shell
item winpetest WinPE test
item winpe64 WinPE X64 Shell
item easusbs Easus Backup Server
item easuspm Easus Partition Manager
item acronis Acronis True Image2016
item winpe8 Windows 8.1 PE
item acronis2 Acronis TI2013
item clonezilla Clonezilla
item add12 Acronis Disk Director
item aoipart AOIAPartition.
item pccheck PC CHECK
item biosupdate Update BIOS UTILITY
item msdos7 MS-DOS 7.1
item hiresboot Hires BootCD
item ultimateboot Ultimate Boot CD
item testusb USB BOOT ONLY
item rimage R-IMAGE
item hostinfo Host Information
item shell ipxe shell
item return return to previous menu
choose --default return --timeout 5000 target && goto ${target}

:powermax
initrd http://${fog-ip}/${fog-webroot}/images/powermax.iso
chain memdisk iso raw ||
goto MENU

:minipart
initrd http://${fog-ip}/${fog-webroot}/images/pwfree.iso
chain memdisk iso raw ||
goto MENU

:memtest6
kernel memdisk iso raw
initrd http://${fog-ip}/${fog-webroot}/images/Memtest6.iso
boot ||
goto MENU

:ghostpe
sanboot http://${fog-ip}/${fog-webroot}/images/winpe.iso
goto MENU

:winpe64
initrd http://${fog-ip}/${fog-webroot}/images/winpe64.iso
chain memdisk iso raw ||
goto menu
:winpe8
initrd http://${fog-ip}/${fog-webroot}/images/winpe8.iso
chain memdisk iso raw ||
goto menu

:winpetest
initrd http://${fog-ip}/${fog-webroot}/images/winpe.iso
chain memdisk iso raw ||
goto menu

:rimage
kernel memdisk iso raw
initrd http://${fog-ip}/${fog-webroot}/images/rimage.iso
boot ||
goto MENU

:xppe
initrd http://${fog-ip}/${fog-webroot}/images/pexp.iso
chain memdisk iso raw ||
goto MENU

:easusbs
sanboot http://${fog-ip}/${fog-webroot}/images/easuspm.iso
goto MENU

:easuspm
sanboot http://${fog-ip}/${fog-webroot}/images/easuspart.iso
goto MENU

:acronis
initrd http://${fog-ip}/${fog-webroot}/images/acronis2016.iso
chain memdisk iso raw ||
goto MENU

:add12
initrd http://${fog-ip}/${fog-webroot}/images/ADD12.iso
chain memdisk iso raw ||
goto MENU

:aoipart
initrd http://${fog-ip}/${fog-webroot}/images/aoaipart.iso
chain memdisk iso raw ||
goto MENU

:biosupdate
initrd http://${fog-ip}/${fog-webroot}/images/BootCD.iso
chain memdisk iso raw ||
goto MENU

:msdos7
initrd http://${fog-ip}/${fog-webroot}/images/dos71.iso
chain memdisk iso raw ||
goto menu

:testusb
kernel memdisk iso raw
initrd http://${fog-ip}/${fog-webroot}/images/bootnet.iso
boot ||

goto MENU

:freedos
initrd http://${fog-ip}/${fog-webroot}/images/fd11src.iso
chain memdisk iso raw ||
goto menu

:pccheck
initrd http://${fog-ip}/${fog-webroot}/images/pccheck.iso
chain memdisk iso raw ||
goto MENU

:hiresboot
initrd http://${fog-ip}/${fog-webroot}/images/hiresboot.iso
chain memdisk iso raw ||
goto MENU

:ultimateboot
initrd http://${fog-ip}/${fog-webroot}/images/ubcd533.iso
chain memdisk iso raw ||
goto MENU

:pfsense
krnel memdisk
append initrd http://${fog-ip}/${fog-webroot}/images/pfSens.iso
boot ||
goto MENU

:ipxedemo
chain http://boot.ipxe.org/demo/boot.php ||
goto MENU

:shell
shell ||
goto MENU

:hostinfo
cpuid --ext 29 && set arch amd64 || set arch x86
echo This computer : ||
echo Platform…${arch} ||
echo Web Boot Root…${boot-url} ||
echo MAC address…${net0/mac} ||
echo IP address…${ip} ||
echo Netmask…${netmask} ||
echo Serial…${serial} ||
echo Asset number…${asset} ||
echo Manufacturer…${manufacturer} ||
echo Product…${product} ||
echo BIOS platform…${platform} ||
echo FOG Ip Address ${fog-ip} ||
echo FOG Web BOOT Root Directory ${fog-webroot} ||
echo ||
echo press any key to return to Menu ||
prompt
goto MENU

:return
chain http://${fog-ip}/${fog-webroot}/service/ipxe/boot.php?mac=${net0/mac} ||
prompt
goto MENU

@x23piracy
Hi I tried initrd + chain etc… but after load ISO there are erro:
trunc…
numbers, number …

press any key to start from DVD…
the system reboot

@zingaro Hi, when the PCs are setting with AHCI Mode enabled,
the ISO image ( WInpe, WIn utilities etc… ) , after load memdisk the PCs reboots …

if change the ACHI to IDE mode all windows based tool utilities start correctly.
I tried change the boot sintax ( memdis, sanboot ) but the result is the same.

there are setting to boot with AHCI selected ?
Regards

Server

• FOG Version: 1.2.0
• OS: ubuntu

Client

• Service Version:
• OS:

Description

@Wayne-Workman Hi,
i was created an NFS point with edit fstab files:
//192.168.1.124/images_clonezilla /mnt/lswxl cifs username=xxxx,password=xxxx 0 0

and work fine after mount -a , i see the files into /mnt/lswxl/ .

Next Step ?

@Wayne-Workman
can you help me with the configuration?
I would not destroy the system!

you can not set up access dirct from fog 1.3 menu.
it’s possible run again the fog wizard setup ? ( i remember that fog setup asks mount NFS access )

Server

• FOG Version: 1.3.0
• OS:

Client

• Service Version:
• OS:

Description

it’s possible after installed FOG change the storage position from Internal HDD to LAN Buffalo shared directory ?
IP fog Server is 192.168.1.130 ( default storage internal HDD 1Terabyte \images directory )
I will change the Storage position to NAS ( 192.168.1.xxx ) into \images folder ( shared sftp,ftp,atp service enabled )

note: when connected to NAS via ftp the path showed is /mnt/array/images

fron ubuntu file manager the network is avaliable and accessible

@Tom-Elliott all OK.
i have moved all image in another folder.
now work fine !

/var/www/fog/images is redirect to /var/www/fog/images
Case Closed!

@zingaro said in Impossible start ISO image after update Fog to 1.3.0:

ln -s /var/www/{html/,}fog

NOOOO does not work :

output is:

cccp@ubuntu:/var/www/html/fog/images$ ln -s /var/www/{html/,}fog
ln: failed to create symbolic link ‘/var/www/fog/fog’: File exists
cccp@ubuntu:/var/www/html/fog/images$

@Tom-Elliott said in Impossible start ISO image after update Fog to 1.3.0:

ln -s /var/www/{html/,}fog

great !!
after move all iso files into /var/www/html/fog/images WORK !!

@Tom-Elliott said in Impossible start ISO image after update Fog to 1.3.0:

ls -lh /var/www/fog/images/

mmhhhh…
see the output :

there are a difference:
…\fog\images and …\html\fog\images !!

the solution could be move the images folder … !!

@Tom-Elliott said in Impossible start ISO image after update Fog to 1.3.0:

Oh and web root is configured in two places for rc10. The reasoning is its more dynamic. The global web root from before is for a common GUI setup. But ultimately the communication tries to happen at the node level first. If that fails the global setting will be used. Check the storage nodes web root as well.

how i can perform this tests ?

@Tom-Elliott said in Impossible start ISO image after update Fog to 1.3.0:

now the error when trying to boot the iso is execution fail? Or permission denied? The pic you tried to upload isn’t showing up.

@Tom-Elliott said in Impossible start ISO image after update Fog to 1.3.0:

where is the iso currently physically located on your server?

/var/www/fog/images
sames pc where fog is installed !

@george1421 sames results… ![0_1474627619530_Capture.JPG]does not works…sames result !!

@zingaro it’s possible test a load of image after enter into ipxe shell ?
I tried runnig directly the command:
. memdisk iso raw <- execution ok
. initrd http://192.168.1.130/fog/images/winpe.iso <-- execution failed !!

@Wayne-Workman
hi, i tried with replace undiolny.0 , into dnsmasq configuation but the result is the same…
i note this anomaly into fog settings , see the image attached.

Ho can reset fog tftpboot configuration ?