That’s wild, I’m on a Dell PowerEdge R900 ESXi, these are my specs.
PowerEdge R900 4 X 6 Hex core (24 Cores)
128Gb memory in failover mode ( Shows 64Gb)
H700 Raid on a MD1000 3Tb X 4 Raid0 ( Cloned nightly as it is RAID 0 ) 7200RPM SATA III
ESXi 5.5 U2
Using Fog 1.2.0 Ubuntu 13.10 X64 ( 6Gb memory, 2 Virtual Sockets, 2 Cores Per Socket )
Brocade 1Gb Layer 3 switch
Fog seems fast, no issues uploading and downloading images. I can deploy between 4-5 Gb Per Minute.
Uploads are now slower, but I’m at max compression as I have a ton of images. I need the deploy speed fast after I create the master image. When I was at default my upload was about 1.5 to 2Gbps. At max I’m sitting just under 1Gbps
However my FTP is maxed at 100Mbps, everything else runs at 1000Mbps ?
I can live with it as everything else seems great. However when I figure whats up with the FTP transfer speed I’ll relay it in hopes it may help ?
Booting to Hirens takes about 20 seconds at most Hirens 15.2 Restored( 2.7Gb ) Hirens maxes my brocade switch out.
Here is how I boot to ISO in advanced boot
:hirens
initrd [url]http://10.10.10.1/ISO/hirens.iso[/url]
chain memdisk iso raw ||
goto MENU
Hope it helps !