@george1421
Changing the settings in the default.ipxe file worked! Man this community is great! I’m going to update my documentation to make note of this so in the event we move subnets again we can tackle this same day!

@george1421
Changing the settings in the default.ipxe file worked! Man this community is great! I’m going to update my documentation to make note of this so in the event we move subnets again we can tackle this same day!

I used these directions @Daniel-Miller

https://wiki.fogproject.org/wiki/index.php?title=BIOS_and_UEFI_Co-Existence#Using_Windows_Server_2012_.28R1_and_later.29_DHCP_Policy

Currently on 1.5.4

Storage Node Config:

Hi,

I recently had to set up UEFI booting on our FOG server as well as moving subnets. I followed the directions from the wiki and I’m able to reach the FOG Admin web interface and see the storage node as well. I changed the IP address in Fog Settings > TFTP Server and also changed it in the Web Server section Fog Settings > Web Server.

Once I try to boot via UEFI IPv4. It loads the iPXE drivers and shows the correct TFTP:// address but it is not showing the correct HTTP:// address for the boot.php file. I’m including screenshots below, but I’ve updated all of our DHCP scopes, update the ./fogsettings file that previously showed ${next-server} as the value for HTTP://. I tried changing this to the hardcoded IP that FOG will have moving forward but it still showed the old HTTP:// address. Is there anywhere I’m missing changing the old IP address?

Hopefully I’m just overlooking something and it can be fixed quickly.

Thanks in advance for your help!