@jmg74 said in dell optiplex 3050 avec windows 10 UEFI:

@verdierr : have you tried different options in your host config in Fog website, about “Host Bios/EFI Exit Type” ?
[FR : As-tu tenté différentes options, pour ton hôte (via le site web de FOG), concernant “Host Bios/EFI Exit Type” ?]

we tried every possible combination but none worked.

for option 60, we have legacy computers and to try the uefi, we saw on the web that you have to activate option 60?

353/5000
Hello,
We tested with another computer DELL, not registered in fog, and we have the same problem at startup pxe.
Could the problem come from DHCP settings
We have a windows dhcp server and we have set options 60,66 and 67 but could you give me these parameters to check that we have put the right

Thank you for this quick response
my english is really very poor so i’m going to use google’s machine translation and i apologize for possible translation errors
We started by installing windows 7 in LEGACY BIOS mode and saved the image on FOG but as microsoft blocks the update and can not install some drivers (graphic for example), we decided to switch to windows 10 in UEFI mode
So we reinstalled windows 10 pro with the DELLRESTORE tools and downloaded the image on the FOG server but when the computer is restarted, it displays the boot page:

checking media presence
media present
start pxe over ipv4

If we start it directly on the SSD, no problem
If we leave network first, restart loop

bonjour,
Les derniers optiplex 3050 de dell ne supportent plus windows 7 (processeur 7gen) alors nous avons installé windows 10 UEFI. Le poste avait déjà été enregistré dans FOG pour le test windows 7.
Maintenant avec windows 10, nous avons envoyé un upload de l’image qui a fonctionné mais après la tache, le poste reste bloque sur la page de boot pxe et redémarre en permanence
Faut-il modifier des paramètres dans FOG pour l’UEFI
Merci de votre aide