It said partition sda1 (ext 3 - the system partition) is corrupted or dammaged, it’s the same for sda2 (extended partition that contains sd5 which is my swap partition) for sda5 i have the message : "swap partition not suported.

here is a screenshot of the fog server (host and server have the same partitioning) :
and a video of the upload : [url]https://mega.co.nz/#!M0QC3QaC!q3Jhk-RrX3zRpVFB3398U8lmkLQ8fW9t2rr-AM-wsCw[/url]
[ATTACH=full]694[/ATTACH]

[url=“/_imported_xf_attachments/0/694_Sans titre.png?:”]Sans titre.png[/url]

Or have I a particular manipulation to do?

1 : I create an image multiple partition single disk : linux (50)
2 : I upload my host image (multiple partition single disk : linux (50) ) , and several partitions are noticed as corrupted
3 : I deploy on the new host (multiple partition single disk : linux (50) ), and fog said that partitions are missing (the corrupted partitions)

Is there something I forget ?

[quote=“BPSTravis, post: 26202, member: 22444”].32 doesn’t really like Linux.

So I can’t say for sure there is a fix for you. Maybe someone has some other ideas but .33 is the only suggestion I have for you.[/quote]

Does Linux deployment works with the 0.33 ?

[quote=“BPSTravis, post: 26186, member: 22444”]That error is telling you that your image is missing disk 1 partition 2.

If you check the server image location do you see both files under images/ubuntu?

If not i’d try uploading that image again as the second partition was either corrupted or not copied.

Also you may want to upgrade to .33 as it has way better support and features.

[URL=‘http://fogproject.org/wiki/index.php?title=Upgrade_to_0.33’][FONT=Tahoma]http://fogproject.org/wiki/index.php?title=Upgrade_to_0.33[/FONT][/URL]
[/quote]

I prefer to keep the 0.32 for the moment. But the only problem I have is the upload and deployment of a Linux image

sorry

Fog version : 0.32
Ubuntu version 12.04

I checked the log and, there are several errors messages such as :

[Mon Apr 28 14:29:38 2014] [error] [client 127.0.0.1] PHP Notice: Undefined variable: sel in /var/www/fog/management/reports/Imaging Log.php on line 126, referer: [url]http://localhost/fog/management/index.php?node=report&sub=file&f=SW1hZ2luZyBMb2cucGhw[/url]

But I think it’s not very important.
I also try to downgrade the grub version, but there is no changes. And I just saw that I have several errors during the upload of my image. And it’s the origin of the problem
During the upload I have an error of corrupted or damaged partitionor the upload take 10 seconds :s
When I try to do a new upload of linux with a new image, the images in /images/ubuntu were not created.

And yes , I searched the forums and in the wiki.

Kernel - 3.14.2 TomElliott

FOG ID: 1054

Date: April 27, 2014

Version: 3.14.2

FOG Type: TomElliott

Arch: 32 bit

[url=“/_imported_xf_attachments/0/682_fog.png?:”]fog.png[/url]

Hello,

I encounter actually a problem with a debian deployment ( with several partition). The upload works fine but when I try to deploy, I have the following error message : the partition d1pxx is missing.

Fog try to deploy the partition d1p2 (which doesn’t exist) and not the d1p5 which exists

can you help me to solve the problem ?

thanks in advance

Cordially

no x) ,

In fact, i’ll boot on the network then, i’ll deploy in ram a linux kernel with an initramfs.

Then with my kernel and busybox I retrive the serial number of the USB stick and I send it to the server to compare it.

Each SN corresponds to an OS. the SN will tell which OS will be deployed. So that part is done. but in order to deploy the OS I need to tell FOG to deploy that OS. But I don’t know how I can do it without the web interface or the PXE menu

But I also though to do post request on php files

[quote=“VincentJ, post: 24758, member: 8935”]if you could put the stuff that is PXE booted onto the stick… then you could use the auth built into 0.33b and all the scripts are there.[/quote]

Yeah I already do it, and it works, but my teacher said he want that the stick must be empty

Yeah, but I must use a USB system for the security, it’s that want my teacher, but it’s not the problem, the only problem I meet, is how or can I launch a deployment with a command line or a script on the server side

it’s for a school project. I need to secure the déployment with a usb key system security. The USB part is okay, and with that kind of system the deployment need to be launched by the server