Posts made by TylerC

Sorry for the million posts but I got it figured out it was like the Windows Server wasn’t saving my changes I closed out DHCP options for the millionth time and when I went back in it had old settings I changed those yet again and bam! It worked!!!

I hate to beg but come on guys don’t leave me hanging. Ever since I update from 0.32 I’ve had nothing but problems and now I’m just trying to go back to how it was but I can’t get it to work. It seems like it is not a FOG issue but more the Windows Server is not telling them to get that file because like I’ve said I can do it from a command line no problem at all. I’ve even restarted my DHCP server.

It’s weird when you watch it, it is almost like it doesn’t even try to grab a file it just instantly pops up saying that the file could not be found.

Stop and restarted the tftpd-hpa service just to be sure and still getting the same message. It’s weird like I said I can go on a command line and grab the file no problem.

[quote=“jdorst, post: 30951, member: 814”]You only need to change to undionly.kpxe if you are using 1.x.x.

Also, have you tried restarting the DHCP service on the DHCP server?[/quote]

No good on restarting DHCP server service on the DHCP server. Still giving the same error message.

I just did a fresh Ubuntu 12.04 32 bit install and installed FOG 0.32 as well. When I network boot I get the message that the TFTP file is not found. Now if I go to a workstation and do a TFTP get x.x.x.x pxelinux.0 I receive the file. On my DHCP server option 66 is set to the FOG server IP and option 67 is set to pxelinux.0 Any ideas?

You figure this out yet. I have this same thing going on right now and I really need to deploy some images. I’m wishing I would have never upgraded from .32 I now understand why some older sysadmins are like never upgrade anything! lol

Before the upgrade to 1.1.1 I had no issue with these workstations this is a fresh install of FOG on a new server. When I try to boot I get the message
“Could not configure console: Input/output error ([url]http://ipxe.org/1d8c2139[/url])
Could not boot: Input/output error ([url]http://ipxe.org/1d8c2139[/url])
Could not boot: Input/output error ([url]http://ipxe.org/1d8c2139[/url])”

When going to the URL it doesn’t give me anything to go by it just says make sure ipxe is up to date. Any help would be appreciated I have other models that have no issue what so ever.

I’ve tried doing a manual import as well and I get the error message ERROR 1064 (42000) at line 1449: You have an error in your SQL syntax; check the manual that corresponds to your MySql server version for the right syntax to use near ‘27157550’ at line 1

Any idea what this means?

I just did a FOG fresh install because I was having issues. Actually reinstalled Ubuntu and everything. I did a backup of the database from the GUI when going into the new FOG server and trying to reimport the database it doesn’t do anything. I click import and the screen reloads with saving FOG configuration and that’s it not completed or anything and none of the hosts are showing up. Any suggestions?

It must be the drive size thing. I just went and tried to image one of my 320’s and it is working. So I’m only going to have to recreate my two 755 images. Praise baby Jesus! lol

Yeah, it’s set to partimage.

I just checked and yep it is bigger is that some kind of bug with the new version of FOG?

No they are all the same size they deployed fine last summer and I haven’t made any changes since besides updating FOG.

I did follow your steps on the formatting the drive bit but I noticed even after that if I run the compatibility test I get this message.
Error: Can’t have a partition outside the disk!
Under the results it shows Network and Disk as pass. I’m really not wanting to recreate these 7 images lol

Any suggestions or anything or am I out of luck and need to wipe my FOG server and start over from scratch?

Never been able to use any images. Even a couple that I uploaded since the update.

Still no luck, this is not a one workstation issue. I can go to any of my 400+ workstations right now and the same thing will happen no matter what workstation or image I select.

Still no luck, I did as the link said. When I went into the image it was already set to Partimage. I went ahead and changed it back to Multiple Partition All Disk. When I go to image the workstation it will get to the point where the screen is showing that the image is Windows 7 number of cores and everything. It is the screen right before where it starts downloading the image. It just reboots instead of downloading the image. I hope that makes sense.

Sorry didn’t mean to sound like a jerk eariler or anything just getting a little flustered. The image was created when I was still running 0.32 and it is a Partimage.