WoW…that was a really fast answer… And it worked

The WinPE is now starting and i see i have to fix the startnet.cmd

If i have some other problems I will post it…

Many,many thanks to you and george1421(who tried to help me via chat)

MfG
Tsche

Hello,

I have now configured the samba and now is the setup starting.
But it takes nearly 8 minutes until the setup prompt is shown.

Because I am not a linux expert there can be one or two little mistakes. I trie to discribe my samba setup.

Debian 10

first installed the samba

sudo apt-get install samba -y

then save the config

sudo mv /etc/samba/smb.conf /etc/samba/smb.orig

create a new config

sudo gedit /etc/samba/smb.conf

(yes I need a little bit gui support)

then I created a smbuser and gave him a password

sudo useradd -s /bin/false smbuser
sudo smbpasswd -a smbuser

my smb.conf file

[global]
workgroup = smb
security = user
map to guest = never

[homes]
comment = Home Directories
browsable = no
read only = no
create mode = 0750

[Windows10]
valid users = smbuser
#Wir beschränken den Zugriff auf den User ''smbuser''
#valid users = @smbusers
#Alternativ kann auch auf eine Benutzergruppe eingeschränkt werden
path = /images/os/mswindows/10Pro-x64/
public = no
writable = yes
comment = Windows 10 Setup-Ordner
printable = no
guest ok = no
create mask = 0600
directory mask = 0700

then I assigned the smbuser to my directory and gave him rights

sudo chown -R smbuser:smbuser /images/os/mswindows/10Pro-x64/
sudo chmod 700 /images/os/mswindows/10Pro-x64/

and at least I restarted the smb

sudo systemctl restart smbd.service

I customized the startnet.cmd(WinPE) for my smbuser and thats it.

I have run a test installation on my old client and it completed successfully.
But the start of my setup takes realy long…

Did anybody see a mistake or has a optimization for me?

(I found the discription for the samba in the german Thomas-Krenn-Wiki: https://www.thomas-krenn.com/de/wiki/Einfache_Samba_Freigabe_unter_Debian and https://www.thomas-krenn.com/de/wiki/Samba_Freigabe_mit_Authentifizierung )

MfG
Tsche

Yeah, I am pretty stupid ^^ I Thought only the {} are the space holder… I deleted the $ and now is also the gparted working … you guys are awsome …

MfG
Tsche

WoW…that was a really fast answer… And it worked

The WinPE is now starting and i see i have to fix the startnet.cmd

If i have some other problems I will post it…

Many,many thanks to you and george1421(who tried to help me via chat)

MfG
Tsche

Hello,

My Host is a Windows 10 PC where I am running Hyper-V. Ihave installed Debian 10 and then in debian the fog.
I have an old Test PC as an client(no uefi).
First i triend to test if the fog ipxe is runnung. That works. my PC shows on network boot the Menun and preinstalled tools like memdisk are working fine.
Then i tried to make a Win10 running. And there starts the odyssey.
I have used this tutorial https://forums.fogproject.org/topic/10944/using-fog-to-pxe-boot-into-your-favorite-installer-images/6 and also https://forums.fogproject.org/topic/10944/using-fog-to-pxe-boot-into-your-favorite-installer-images/10 for UEFI Clients.
When i start with my non uefi client the non uefi Win 10 I get an error.

My DNS is the router (Zyxel USG60W).

that is my menu entry in fog :

my iso is in the right place…

I think I have some mistakes anywhere in the dns settings…?..

(sry for my english, my native language is german and I am pretty new in the linux community…)

MfG
Tsche