[quote=“Junkhacker, post: 29011, member: 21583”]that’s not an error. you’re running a pre-official release version of 1.1.0
the latest official release is 1.0.1
if you have not used prior versions of fog, all your images are partclone format, and you do not need to change anything[/quote]

Thanks for the clarification. I just discovered that if I use the same hard drive that I uploaded with (download to the same hard drive), the image download process works. If I change hard drive it fails. The original HD is 500 GB and I tried to download to an 80 GB drive (actual image is about 20 GB in size). Minor discovery. I’m going to try and cleanly wipe the 80 GB and see if it’ll take the image.

[quote=“TOMMY C, post: 28995, member: 8253”]I’m not certain what mine is set to as I started fresh with an image upload on version 1.0.1. How do I change it? It doesn’t matter if I start the image via the UI or through the boot menu, it continues to loop and never download the image. If I start it with the UI, the job is executed and then when the computer reboots, the job disappears as if it was completed. Before I updated to the [URL=‘http://mastacontrola.com/ipxe/f3d42-QUOTA_20-GOOD/undionly.kkpxe’][I][SIZE=12px]undionly.kkpxe[/SIZE][/I][/URL] file, I wasn’t able to get to the menu at all. It just hung. Tom were you aware of a graphical error in your logo? Version 1.1.0 rather than 1.0.1?[/quote]

It’s partclone for the image upload…

[quote=“Tom Elliott, post: 28930, member: 7271”]What’s the image type set to? Partimage or Partclone?[/quote]

I’m not certain what mine is set to as I started fresh with an image upload on version 1.0.1. How do I change it? It doesn’t matter if I start the image via the UI or through the boot menu, it continues to loop and never download the image. If I start it with the UI, the job is executed and then when the computer reboots, the job disappears as if it was completed. Before I updated to the [URL=‘http://mastacontrola.com/ipxe/f3d42-QUOTA_20-GOOD/undionly.kkpxe’][I][SIZE=12px]undionly.kkpxe[/SIZE][/I][/URL] file, I wasn’t able to get to the menu at all. It just hung. Tom were you aware of a graphical error in your logo? Version 1.1.0 rather than 1.0.1?

[url=“/_imported_xf_attachments/0/878_Screen Shot 2014-06-03 at 7.42.15 AM.png?:”]Screen Shot 2014-06-03 at 7.42.15 AM.png[/url][url=“/_imported_xf_attachments/0/879_Screen Shot 2014-06-03 at 7.43.46 AM 1.png?:”]Screen Shot 2014-06-03 at 7.43.46 AM 1.png[/url]

[quote=“Junkhacker, post: 28727, member: 21583”]try this file [url]http://mastacontrola.com/ipxe/f3d42-QUOTA_20-GOOD/undionly.kkpxe[/url]
note the extra k, you will need to make sure you dhcp option 67 is set for that (or rename this file to the same as the last one, but make note of this technically incorrect naming convention)[/quote]

I used this kkpxe file and was able to get the boot menu & upload my image via Lenovo M78 workstation (similiar RealTek card). However when I go to DOWNLOAD the newly created image, the computer goes into an endless loop, reboots, the task completes and disappears. Any ideas? I’m going to attach a .mov video captured from my phone. Any help would be great. This is a fairly new model just released from Lenovo. Video Link: [url]https://drive.google.com/file/d/0B6t9vun6oTf6MTBRX3pnOGttZ2s/edit?usp=sharing[/url]