Posts made by thomasdec

I found why the .efi file doesn’t work !
The problem come from an boot option.
I disable Security Chip in Security tab in Lenovo BIOS and now it’s work.
I can access FOG menu and image my computer.
Sorry for not finding it sooner !

@Sebastian-Roth @george1421 thanks again so much for your help !

@Sebastian-Roth I haveefirc=1 on all EFIIMAGE message.

@Sebastian-Roth I tested with other Yoga 11e and ThinkPad E550 in UEFI mode, I have the same result.
Picture from test with DEBUG=efi_image :

In Legacy mode I can image my windows, so for now I will use this solution to develop my sysprep.

@Sebastian-Roth Result :

@Sebastian-Roth Result of your modify kernel :

After this screen, windows boot normally

@Sebastian-Roth I have a kernel panic on USB boot.

@Sebastian-Roth I add commande dhcp before the others command, without this command I get error “Network unreachable”

I think you have an error in your file.efi, when I execute dhcp, the same message loop appears (“NETDEV” in yellow) about dhcp command.

Result commad kernel http://x.x.x.x/fog/service/ipxe/bzImage loglevel=7 initrd=init.xz root=/dev/ram0 rw ramdisk_size=127000 :

Result command imgstat:

Result command imgfetche:

Result command imgstat:

Result command boot:

iPXE>boot
No image selected

Sorry for the quality of pictures

@Sebastian-Roth Warning, I forgot the first line because it’s write on right side of sreen.
First line :
IMAGE shell.ipxe at [73470d8d) registered

@Sebastian-Roth With your new file:

NBP filesize is 1958 Bytes
Downloading NBP file...
Succeed to download NBP file.

Then windows boot.

@Sebastian-Roth
The secure boot is disable because when he is enable I can’t access fog menu
Same error :

Result command :

@Sebastian-Roth

Thanks for reply !

Type “exit” in iPXE -> return in Boot Menu, from this menu I can choose “Windows Boot Manager” and Windows start but not
automatically.

@Sebastian-Roth said:

Please take a picture so we can see where exactly the errors happen.

Hi,
when I choose “Boot from hard disk” I get error “chainloading failed” with “Exit” option, and when I use other option (sanboot, grub …) fog menu loop. I can’t access to windows.

If I choose “Quick registration” I get error :
“bzImage… ok”
“Could not select: Exec format error (http://ipxe.org/2e008081)”
“Could not boot: Exec format error (http://ipxe.org/2e008081)”
“Could not boot: Exec format error (http://ipxe.org/2e008081)”
“Chainloading failed, hit ‘s’ … reboot in 10 seconds”

I tested with the other file.efi in DHCP option on Windows 2012 with no result

I use FOG git version 7001 on Centos 7
Computer : Lenovo ThinkPad Yoga 11e, Windows 10, UEFI only, disable secure boot

FOG works fine with my other computer (Lenovo ThinkPad E550, legacy)

Thanks and sorry if my english is not good !