Posts made by TheeGrizzly

please help

Hello, im running Fog .32 on ubuntu 12.04,

I have been imaging fine all along, my tftp quit the other day, so i brought that down and back up and was able to upload images. However now when i try to deploy an image i get an error

[CODE]Can’t Read following volume file:

images/780/dlp2.img.001

Enter another file path or directory.[/CODE]

I have tried this with 3 different images and created a new image and I’m still getting the same error.

Does any one know a cause or solution for this problem?

Hello all,

So I’m moving my fog server to a faster computer because I had it on a really old shitty laptop that is dying.

I have all of my data stored onto a usb hard drive, is there anyway I can just merge this usb with my new server and set it to have the same IP to have no hickups?

So it wasn’t my proxy because i have proxy disabled while im browsing with firefox, and it still doesn’t display the kernels. I have looked everywhere for a solutions, but still no luck. Does anyone know of a fix?

refer to edit

Sorry about posting twice I posed my post than i did a search and noticed this one.

EDIT:

I turned off my proxy and it is still displaying the same thing

I am having the same issue

[URL=‘http://postimage.org/’][IMG]http://s9.postimg.org/rju748k0f/untitled.png[/IMG][/URL]

As you can see in the image above, it doesn’t show all the kernels like i have seen in all the guides on how to change your kernel to make it work with certain models of computers. I set up another fog server the same way i set up mine in another school district and all of the kernels appeared in that one. Can someone tell me what is going on, or if I am just stupid and not doing something right.

Alright… I’ll do a little research and see how hard it is to move it to something a little faster

How hard is it to move my fog server to a new machine?

I have a feeling that it is because I put my fog server on such a slow computer. It is installed on a Dell L attitude d620 with a 2G of RAM.

As for the error im not in the office right now but it says something like “found pxe boot menu (we think)” Than it will take forever to boot to the pxe menu if it does

So when I am either uploading or downloading an image no other computers in my network will make it past tftp server. Not allowing other computers to boot to the pxe menu. This only happens when I am imaging is there a setting I can change so this won’t happen?

Thanks,
Austin

any one make any progress with getting a 390 to boot after it runs the pxe boot

The fog log for the laptop is as follow
" 6/27/2013 11:10 AM FOG::SnapinClient Attempting to connect to fog server…
6/27/2013 11:10 AM FOG::SnapinClient Module is active…
6/27/2013 11:10 AM FOG::SnapinClient No Tasks found for: B8:CA:3A:CF:BC:AE|F4:B7:E2:6A:F9:C5"

The fog log for the 390 looks like this
" 6/27/2013 11:17 AM * Starting FOG.GreenFog
6/27/2013 11:17 AM * Starting FOG.GUIWatcher
6/27/2013 11:17 AM FOG: DisplayManager Starting display manager process…
6/27/2013 11:17 AM * Starting FOG.HostNameChanger
6/27/2013 11:17 AM FOG::GUIWatcher Starting GUI Watcher…
6/27/2013 11:17 AM * Starting FOG.HostRegister
6/27/2013 11:17 AM * Starting FOG.MODDebug
6/27/2013 11:17 AM FOG::GreenFog Sleeping for 51 seconds.
6/27/2013 11:17 AM * Starting FOG.PrinterManager
6/27/2013 11:17 AM FOG::MODDebug Start Called
6/27/2013 11:17 AM FOG::MODDebug Sleeping for 100 Seconds
6/27/2013 11:17 AM FOG::HostRegister Starting host registration process…
6/27/2013 11:17 AM FOG::HostnameChanger Starting hostname change process…
6/27/2013 11:17 AM FOG::HostnameChanger Yielding to other subservices for 1 seconds.
6/27/2013 11:17 AM * Starting FOG.SnapinClient
6/27/2013 11:17 AM * Starting FOG.TaskReboot
6/27/2013 11:17 AM FOG::TaskReboot Taskreboot in lazy mode.
6/27/2013 11:17 AM FOG::TaskReboot Starting Task Reboot…
6/27/2013 11:17 AM FOG: PrinterManager Starting interprocess communication process…
6/27/2013 11:17 AM * Starting FOG.UserCleanup
6/27/2013 11:17 AM * Starting FOG.UserTracker
6/27/2013 11:17 AM FOG::SnapinClient Starting snapin client process…
6/27/2013 11:17 AM FOG: PrinterManager interprocess comm startup: OK
6/27/2013 11:17 AM FOG::UserCleanup Sleeping for 16 seconds.
6/27/2013 11:17 AM FOG::UserTracker Starting user tracking process…
6/27/2013 11:17 AM FOG::SnapinClient Sleeping for 454 seconds.
6/27/2013 11:17 AM FOG::HostRegister Exiting because only 1 mac address was found.
6/27/2013 11:17 AM FOG: DisplayManager Attempting to connect to fog server…
6/27/2013 11:17 AM FOG::AutoLogOut Module is active…
6/27/2013 11:17 AM FOG: DisplayManager Module is disabled globally on the FOG Server.
6/27/2013 11:17 AM FOG::HostnameChanger Attempting to connect to fog server…
6/27/2013 11:17 AM FOG::HostnameChanger Module is active…
6/27/2013 11:17 AM FOG::HostnameChanger AD mode requested, confirming settings.
6/27/2013 11:17 AM FOG::HostnameChanger Hostname is up to date
6/27/2013 11:17 AM FOG::HostnameChanger Attempting to join domain if not already a member…
6/27/2013 11:17 AM FOG::UserTracker Attempting to connect to fog server…
6/27/2013 11:17 AM FOG::TaskReboot Attempting to connect to fog server…
6/27/2013 11:17 AM FOG::AutoLogOut Timeout value is Zero, disabling module.
6/27/2013 11:17 AM FOG::TaskReboot Module is active…
6/27/2013 11:17 AM FOG::TaskReboot Attempting to connect to fog server…
6/27/2013 11:17 AM FOG::AutoLogOut c:\program files\fog\images\alo-bg.jpg
6/27/2013 11:17 AM FOG::TaskReboot No job exists for D0:67:E5:2B:05:F4
6/27/2013 11:17 AM FOG::TaskReboot No task found for client.
6/27/2013 11:17 AM FOG: PrinterManager Module is active…
6/27/2013 11:17 AM FOG: PrinterManager Starting printer manager…
6/27/2013 11:17 AM FOG: PrinterManager Yielding to other services for 31 seconds.
6/27/2013 11:17 AM FOG::UserTracker Module is active…
6/27/2013 11:17 AM FOG::HostnameChanger Domain Error! (‘Unknown Error’ Code: 87)
6/27/2013 11:17 AM FOG::AutoLogOut at System.Drawing.Image.FromFile(String filename, Boolean useEmbeddedColorManagement)
at FOG.AutoLogOut.doWork()
6/27/2013 11:17 AM FOG::UserCleanup Starting user cleanup process…
6/27/2013 11:17 AM FOG::UserCleanup Attempting to connect to fog server…
6/27/2013 11:17 AM FOG::UserCleanup Module is disabled globally on the FOG Server, exiting.
6/27/2013 11:18 AM FOG: PrinterManager Management level = 0
6/27/2013 11:18 AM FOG: PrinterManager This host is set to NO MANAGEMENT, we will exit now.
6/27/2013 11:18 AM FOG: PrinterManager Major printing operations complete, moving to tracking mode.
6/27/2013 11:18 AM FOG: PrinterManager New user detected: 390test\Administrator
6/27/2013 11:18 AM FOG: PrinterManager Waiting for tray to load…
6/27/2013 11:18 AM FOG::UserTracker Event: LOGIN for 390test\Administrator
6/27/2013 11:18 AM FOG::UserTracker Record processed by server!
6/27/2013 11:18 AM FOG: DirCleaner Starting directory cleaning process…
6/27/2013 11:18 AM FOG: DirCleaner Attempting to connect to fog server…
6/27/2013 11:18 AM FOG: DirCleaner Module is active…
6/27/2013 11:18 AM FOG: DirCleaner Determining which directories should be cleaned…
6/27/2013 11:18 AM FOG: DirCleaner No directories are configured to be cleaned.
6/27/2013 11:18 AM FOG: DirCleaner Starting directory cleaning loop…
6/27/2013 11:18 AM FOG: DirCleaner Module has finished work and will now exit.
6/27/2013 11:18 AM FOG::GreenFog Starting green fog…
6/27/2013 11:18 AM FOG::GreenFog Attempting to connect to fog server…
6/27/2013 11:18 AM FOG::GreenFog Module is active…
6/27/2013 11:18 AM FOG::GreenFog No actions were found.
6/27/2013 11:18 AM FOG::GreenFog No tasks found after validation!
"

Nothing stands out to me as why either are not auto joining to the domain.

I am having the same problem and mine is set to nic with pxe, beginning to think this bios isn’t compatible with fog

I’m running fog .32 on an ubuntu server.

when i vew my log viewer it is filled with error that state "
[06-21-13 8:13:41 am] | [06-21-13 8:13:41 am] Failed to connect to database server, will try again in next iteration."

Really have no clue what causes this or how to fix it.

Any help would be great

I’m sorry i miss typed that in my post, my setting have it stored as domain\administrator

edit: update. I took a 7010 windows 7 out of the domain and restarted it and fog added it back in.??! But it still won’t add in a 390 running 7 or a Lat e5530 running 7. Needless to say I am very confused

First off I am running fog 3.2 on ubuntu. I am fogging machines fine but they will not join to the a/d. I have the setting set as.

FOG_AD_DEFAULT_DOMAINNAME :mydomain.org
FOG_AD_DEFAULT_OU :Left blank
FOG_AD_DEFAULT_USER : mydomain.org/administrator
FOG_AD_DEFAULT_PASSWORD : fog crypt password

I keep getting the error in the log that says: “Failed to connect to database server, will try again in next iteration.”

please help

[quote=“madeyem, post: 12683, member: 797”]If you want to use Sysprep with an unattend.xml, you have to run a batch script, in which you specify the location of the unattend.xml. Starting Sysprep via the GUI will always run the default Sysprep process.

For example, create a batch file with the following content:

[CODE]@echo off
cd c:\windows\system32\sysprep
sysprep /oobe /generalize /shutdown /unattend:C:*path to the unattend.xml*\unattend.xml[/CODE][/quote]

I don’t use a .bat file I just call it from command prompt and I point to the unattend but it is still not working right.

After several trial and error attempts I finally got my sysprep the way i wanted it. I sysprepped a 7010 and uploaded it to the fog server. Prior to doing this I saved the unattend.xml to a flash drive so i could use it on other machines. When I copy and paste the Unattend.xml off the the flash drive onto a C:\windows\system32\sysprep folder it copies; however, when i try and view the unattend file it says that my path is incorrect and than when I run sysprep i just runs the default settings. Can someone please help me with my problem

Thanks,
Austin