Posts made by TectonicLeader

I am trying to setup FOG in a virtual box on an isolated network. This network cannot be connected to internet but the host computer can be. The problem is I do not see a way to have VB connected to both networks at once in a way that fog can use properly. Kind of lost here I see a lot of posts from 12 years ago about this stuff but it seems mostly outdated now.

@Tom-Elliott I’ve done that. I’ll try swapping the drive but I am fairly confident that’s not the issue.

I am getting this error. The SSD is fine there are no issues with it as far as I can tell here is the error screen. The screen. Fog is running on Ubuntu on a custom machine and the computer being captured is also custom.

@youzersef It looks like that is for HDD I am using an SSD. I followed the steps anyway and it has changed the error but its freezing up in the same spot still. New Error

@youzersef Looks like it helped still have an issue though. The Next Issue

@youzersef I am trying to capture an image from a host. https://wiki.fogproject.org/wiki/index.php?title=Booting_into_FOG_and_Capturing_your_first_Image The server is 192.168.1.3 and the host is 192.168.1.7. Yes they are on the same network.

@youzersef I changed the router because it was causing a failure to boot via PXE.

@youzersef Its the IP the server used to be on before I switched to a different network.

Yea there is no device registered to that IP on the network currently.

@youzersef Do you mean 192.168.1.2 that’s the machine the fog server used to be running on… Huh

I am trying to capture an image of a windows 10 machine but am getting this error before restart.

Error Image

Not really sure where to go from here.

@george1421 That did the trick. Now I need to dig into why its failing to capture an image. I’ll make a different post for that though if I need to.

@george1421 well it certainly changed the end result but still no success. New Display Image

I am using a Netgear router R6700v3 and 2 non standardized computers for the server and client. I can see the tftp when checking from Windows 10 on the client computer but it times out while trying to boot to it.

I am trying to learn how to setup a fog server and create my girst image. When I try to connect to the server I am getting this then booting to my OS. Display Picture