Hi,

sorry but I have the same problem but… in CLI command there isn’t “set next-server” in DHCP setting:
config system dhcp server
edit <server_index_int>
set auto-configuration {enable | disable}
set conflicted-ip-timeout <timeout_int>
set default-gateway <address_ipv4>
set dns-service {default | specify}
set domain <domain_name_str>
set enable {enable | disable}
set interface <interface_name>
set lease-time <seconds>
set netmask <mask>
set option1 <option_code> [<option_hex>]
set option2 <option_code> [<option_hex>]
set option3 <option_code> [<option_hex>]
set server-type {ipsec | regular}
set start-ip <address_ipv4>
set wins-server1 <wins_ipv4>
set wins-server2 <wins_ipv4>
set wins-server3 <wins_ipv4>
set dns-server1 <address_ipv4>
set dns-server2 <address_ipv4>
set dns-server3 <address_ipv4>
set ip-mode {range | usrgrp}
set ipsec-lease-hold <release_seconds>
set vci-match {enable | disable}
set vci-string <string>
config exclude-range
edit <excl_range_int>
set end-ip <end_ipv4>
set start-ip <start_ipv4>
config ip-range
edit <ip_range_int>
set end-ip <end_ipv4>
set start-ip <start_ipv4>
config reserved-address
edit <id_int>
set ip <ipv4_addr>
set mac <mac_addr>
end
end

…and then?

Thanks